Atributy
- Kalibr: -
- Náboje:
300 PRC
- Dodací hmotnost: 0,091kg
- Výška přepravy: 38mm
- Šířka přepravy: 38mm
- Délka přepravy: 89mm
- UPC: 815145027283
Produkt č.: 749018851
Výrob. č.: CG-3PRC
815145027283 Nejdůležitějším použitím měřiče nábojnic je nastavení lisovacích nástrojů pro plné přebíjení s rozměrem 7⁄8"-14. Běžnou chybou při přebíjení je přílišné zvětšení rozměrů vaší mosazi. Pomocí tohoto nástroje a kalibru lze rychle a přesně měřit hloubku nábojnic. Standardní styl: Tento jednokusový měřič zkontroluje celkovou délku, aby naznačil potřebu zkracování, a datum k délce hlavy, aby zajistil správnou hloubku a zabránil nadměrnému zvětšení. Nastavitelný styl: Pro náboje s páskem. Zatímco pásek poskytuje oporu pro správnou hloubku, životnost nábojnice se dramaticky zkrátí, pokud nebude přebíjení na rameni omezeno na minimum. SPECIÁLNÍ OBJEDNÁVKOVÉ MĚŘIČE NÁBOJNIC JSOU K DISPOZICI---MĚŘTE JEN DÉLKU NÁBOJNICE
Introducing the WILSON CASE GAGE, 300 PRC CASE GAGE from L.E. WILSON, an essential tool for every reloader.
The most important use of a cartridge case gage is for setting up 7⁄8"-14 press type full length resizing dies. A common error in reloading is to oversize your brass. Headspace of fired cases can quickly and accurately be measured using this tool and a caliper.
This one piece gage will check overall length to indicate a need for trimming and datum to head length to assure correct headspace to prevent over sizing.
Designed for belted mags, this style ensures that while the belt provides support for proper headspace, the life of the case will drastically shorten unless resizing is held to a minimum at the shoulder.
SPECIAL ORDER CASE GAGES ARE AVAILABLE – MEASURE CASE LENGTH ONLY.
300 PRC
Worth every penny 3.4.2017
I've reloaded for years but never used Wilson products. Setting up for a custom build 22-250, I wanted accurate cartridge headspace measurements and thought I'd try them although there are less expensive versions. This gage is superb tool room quality. You can use it as a go/no-go or using a depth mic measure the deviation from the reference and flip it over and you get case length. Note that they are in the "white" with no surface finish so you must keep them lubricated like precision cutting tools.
Awesome Product 20.5.2016
I bought this to ensure the correct head space on my reloads. With it I was also able to easily determine that some factory ammo is actually out of SAAMI specs for head space which was causing partial case head separation. Also works great to check the length of your brass for trimming. A+++
Narazili jsme na chybu při načítání obsahu. Obnovte stránku a zkuste to znovu. Pokud problém přetrvává, kontaktujte naši zákaznickou podporu.