Interchangeable front sight Fits Walther P22 and P22Q Sight height .215 inches Sight height equivalent to the factory #3 front sight Comes with six Litepipes in red and green Includes carry case and Allen Wrench to install sight
Další...
Vyměnitelné mířidlo na přední stranu kompatibilní s Walther P22 a P22Q Výška mířidla .215 palců Výška odpovídá továrnímu mířidlu č. 3 Dodáváno se šesti Litepipes v červené a zelené barvě Obsahuje pouzdro na přenášení a imbusový klíč pro instalaci mířidla
Další...
Hodnocení zákazníků pro položku HIVIZ FIBER OPTIC FRONT SIGHT FOR WALTHER P22/P22Q
Počet hodnocení: 2
Od brownells.com: 2
Průměrné hodnocení: 1
Won't work with a P22 Target Model(7.3.2013)
I bought one of these for my P22 with the removable vented barrel shroud that is held on by two torx/hex bolts. What you don 't see from the photo is that the sight secures to the frame's sight cut by a very small allen screw. The wrench, as i remember, was provided; but this is not the problem. First off, the screw is difficult to seat inside this removable shroud as there is no way to get the wrench square into the screw hole as the hole sits towards the gun's breech-not muzzle. So you're working in a dark hole to begin with. I finally got it threaded in and cinched up tight with a bit of purple loctite.
HaHa! Big problem! That little screw will not let the barrel shroud slide back on and after Loctiting the screw, i could not get sufficient angle to turn the screw even after bending the provided wrench 90 degrees on the end.
I finally had to remove it with a pair of heavy wire cutters- destroying it in the process.
It may well fit on the shorter barrelled P22's but don't know.
dont waste ur money on this!(25.4.2016)
this is a complete waste of time and money. I bought this thinking it would be an upgrade. nope. I have no idea what hiviz was thinking. ive mounted sights on everything from glocks, sigs, hks and walther p99s. but this was my first experience with hiviz. this was impossible to mount. the set screw was no way reachable with the provided allen wrench. I was installing directly on the slide. and it was just like the other review exactly. i ended up stripping the screw's head because of the awkward angle. just not well thought out. I will be using the factory plastic sight. don't waste your money.
Produkt č.: 638000195 HIVIZ FIBER OPTIC FRONT SIGHT FOR WALTHER P22/P22Q Číslo výrobce: WAL2012613485588859 Vyměnitelné mířidlo na přední stranu kompatibilní s Walther P22 a P22Q Výška mířidla .215 palců Výška odpovídá továrnímu mířidlu č. 3 Dodáváno se šesti Litepipes v červené a zelené barvě Obsahuje pouzdro na přenášení a imbusový klíč pro instalaci mířidla
Interchangeable front sight Fits Walther P22 and P22Q Sight height .215 inches Sight height equivalent to the factory #3 front sight Comes with six Litepipes in red and green Includes carry case and Allen Wrench to install sight
Další...
Vyměnitelné mířidlo na přední stranu kompatibilní s Walther P22 a P22Q Výška mířidla .215 palců Výška odpovídá továrnímu mířidlu č. 3 Dodáváno se šesti Litepipes v červené a zelené barvě Obsahuje pouzdro na přenášení a imbusový klíč pro instalaci mířidla
Další...
Hodnocení zákazníků pro položku HIVIZ FIBER OPTIC FRONT SIGHT FOR WALTHER P22/P22Q
Počet hodnocení: 2
Od brownells.com: 2
Průměrné hodnocení: 1
Won't work with a P22 Target Model(7.3.2013)
I bought one of these for my P22 with the removable vented barrel shroud that is held on by two torx/hex bolts. What you don 't see from the photo is that the sight secures to the frame's sight cut by a very small allen screw. The wrench, as i remember, was provided; but this is not the problem. First off, the screw is difficult to seat inside this removable shroud as there is no way to get the wrench square into the screw hole as the hole sits towards the gun's breech-not muzzle. So you're working in a dark hole to begin with. I finally got it threaded in and cinched up tight with a bit of purple loctite.
HaHa! Big problem! That little screw will not let the barrel shroud slide back on and after Loctiting the screw, i could not get sufficient angle to turn the screw even after bending the provided wrench 90 degrees on the end.
I finally had to remove it with a pair of heavy wire cutters- destroying it in the process.
It may well fit on the shorter barrelled P22's but don't know.
dont waste ur money on this!(25.4.2016)
this is a complete waste of time and money. I bought this thinking it would be an upgrade. nope. I have no idea what hiviz was thinking. ive mounted sights on everything from glocks, sigs, hks and walther p99s. but this was my first experience with hiviz. this was impossible to mount. the set screw was no way reachable with the provided allen wrench. I was installing directly on the slide. and it was just like the other review exactly. i ended up stripping the screw's head because of the awkward angle. just not well thought out. I will be using the factory plastic sight. don't waste your money.