Provides Familiar M16 Service Rifle Sight Picture & Improved Accuracy
Replacement sight sets give your 10/22® a longer sight radius for improved accuracy potential, plus the same sight picture as an AR-15/M16 with military-issue sights. Installation requires no gunsmithing, no drilling/tapping, and no permanent alterations to the rifle. Rear sight mounts using the factory-provided holes for a scope base. All-steel front sight assembly has a standard detent-locking M16 post surrounded by protective ears that guard it from damage and misalignment. User may substitute any aftermarket post that replaces the standard A2. TSR100 set’s rear sight is adjustable for windage and features close-range and long-range flip-up apertures similar to the M16A2 sight.
SPECS: Front Sight - steel, blued, matte finish, .53" (13.4mm) wide, .90" (23mm) high. Rear Sight - aluminum, black finish. 2.9" (7.4cm) long, .94" (24mm) tall. Sold as front/rear sight sets. Includes mounting screws.
Další...
Poskytuje známý obraz míření vojenské pušky M16 a lepší přesnost
Náhradní sady mířidel poskytují vaší 10/22® delší rádius míření pro lepší potenciál přesnosti, stejně jako stejný obraz míření jako u AR-15/M16 s vojenskými mířidly. Instalace nevyžaduje žádné zásahy zbrojíře, vrtání/závitování a žádné trvalé úpravy pušky. Zadní mířidlo se montuje pomocí továrně předvrtaných otvorů pro montáž zaměřovače. Celokovová sestava předního mířidla má standardní pojistný M16 kolík obklopený ochrannými ušima, která jej chrání před poškozením a nesprávným zarovnáním. Uživatel může nahradit jakýkoliv aftermarketový kolík, který nahrazuje standardní A2. Sada TSR100 má zadní mířidlo nastavitelné pro boční korekci a obsahuje blízké a dlouhé rozsahy překlopných apertur podobně jako mířidlo M16A2.
SPECS: Přední mířidlo - ocel, modřená, matný povrch, .53" (13.4mm) široké, .90" (23mm) vysoké. Zadní mířidlo - hliník, černá úprava. 2.9" (7.4cm) dlouhé, .94" (24mm) vysoké. Prodáváno jako sady předních/zadních mířidel. Obsahuje montážní šrouby.
Další...
Hodnocení zákazníků pro položku TECH SIGHTS RUGER® 10/22® FLIP-UP TSR100 GI-STYLE SIGHT SET BLACK
Počet hodnocení: 16
Od brownells.com: 16
Průměrné hodnocení: 4,6
Unbeatable upgrade for stock 1022(18.4.2011)
The Tech-Sight TSR100/TSR200 simply replaces the factory sights and very easy to install. The Ruger rear sight is assembled to the rear of the barrel. The Tech-Sights rear sight is installed to the rear of the receiver increasing the sight radius by a whooping 8 inches which translates to better accuracy with an iron sight. Combine that advantage to a rugged GI style front and rear sight with genuine AR15 sight components and you have a winner. With a very attractive price tag to go along with it, it deserves a 5 star rating.
Great sights(26.6.2011)
Very well made sights that are easy to install and work very well. they made the gun look much better, and i love the sight picture.
Excellent iron sights for a stock 10/22(20.7.2011)
Tech Sights are an outstanding alternative to scoping your 10/22. They're lighter and tougher, too.
A Must Have for Your Ruger 10/22!(21.7.2011)
The Tech Sights for the Ruger 10/22 are much, much better that the factory sights. Installation takes about 15 minutes and is easy.
The "large" aperture seems a bit small compared to a real A2 sight but did not cause any issues when shooting.
Great Sights(19.10.2011)
They are a little large on such a small rifle, but work great. After zeroing, I can easily switch between apertures without having to rezero.
Great Fit and Function(3.2.2012)
Installed easily. I really like the battle rifle look especially when coupled with a flash suppressor. Zeros easily.
Great sights(26.3.2012)
These are a great addition to your .22lr. If you are spending some money to spruce up your rifle, I'd suggest picking these up as well. Along with some trigger parts and a smoother action, these make shooting your 10/22 fun again.
FYI, If I was shooting an appleseed, I'd get the 200s instead. The extra adjustability is nice (though not necessary).
Awesome sights(27.5.2012)
These sights are awesome. They are a good value and installation was a breeze. The only complaint I had was how difficult they were to adjust. Maybe the manufacturer has a tool, I do not know. But it took all of 10 minutes to install and I got lucky with sighting in, I was only 3" off of bullseye at 25yds. They seem to hold zero well and feel durable. But the main part about installation that was vague was the screw in the front. Install it first then slide it into the dovetail, just don't tighten it down before doing so.
A must have!(10.7.2012)
Super M-16 A2 style sights. Vastly superior to the factory sights. Easy to install, and very user friendly if you like the M-16 type sights. Before the install I could barely get on the factory sights, and could barely hit paper. With these sights at 25m I do as well as with my issue M-4 (5 round strings all holes touching). Some say they are hard to adjust, but you just use a nail to press down the detent and then turn the adjustment.
Best iron sight upgrade for the 10-22(9.11.2012)
Finally decided to buy the T100 set and glad I did. Easy to install and far superior to the factory sights. Makes shooting the 10-22 fun all over again. I bought an AR rear sight tool made my adjustments and its done. I have shot many rounds with this set up and it has not come loose or shifted point of impact after disassembly of the rifle for cleaning. Excellent buy.
Great sights much better than factory(15.3.2013)
Great sights eazy to install Much better than the Ruger factory sights
Great sights(11.7.2013)
Great sights to help turn my 10/22 into a training rifle. However it was a bummer that the screws had to be ordered separately from the manufacturer.
Great Buy!!(15.8.2013)
I got my tsr100 sight set in the mail today it only took 3 days to ship to ohio and they look awesome and are extremely simple to install
it comes with the screws!(25.3.2014)
nice sights, easy to install and fun to use. it comes with the ruger base screws. wish I had waited for it to arrive before I ordered them! guess it doesn't hurt to have a few extras.
peep sights are easier and faster to aim(21.1.2015)
for a 10/22, all you need are tech sights and a target hammer
Stock sights are better(4.8.2018)
Mounted these on my 10 22 used for target shooting at both 25 yds and 50. Mounting very simple easy directions to follow. Adjustment for windage no problem however, gun always shoots very high. The only elevation adjustment is the front postand and adjusted to maximum but still not enough to bring point of impact down. Went back to original sights which work fine. Very disappointed.
Produkt č.: 100006910 TECH SIGHTS RUGER® 10/22® FLIP-UP TSR100 GI-STYLE SIGHT SET BLACK Číslo výrobce: TSR100 Náhradní sady mířidel poskytují vaší 10/22® delší rádius míření pro lepší potenciál přesnosti, stejně jako stejný obraz míření jako u AR-15/M16 s vojenskými mířidly. Instalace nevyžaduje žádné zásahy zbrojíře, vrtání/závitování a žádné trvalé úpravy pušky. Zadní mířidlo se montuje pomocí továrně předvrtaných otvorů pro montáž zaměřovače. Celokovová sestava předního mířidla má standardní pojistný M16 kolík obklopený ochrannými ušima, která jej chrání před poškozením a nesprávným zarovnáním. Uživatel může nahradit jakýkoliv aftermarketový kolík, který nahrazuje standardní A2. Sada TSR100 má zadní mířidlo nastavitelné pro boční korekci a obsahuje blízké a dlouhé rozsahy překlopných apertur podobně jako mířidlo M16A2.
3249CZK103 249,00 Kč
*
Dodací lhůta je přibližně 14-21 dní. Více než 10 ks. skladem USA
Sada mířidel TSR100 poskytuje delší rádius míření a lepší přesnost pro Ruger® 10/22®, s podobným obrazem míření jako u AR-15/M16.
Instalace nevyžaduje zásahy zbrojíře, vrtání nebo trvalé úpravy; zadní mířidlo se montuje do továrně předvrtaných otvorů.
Přední mířidlo je celokovové, s ochrannými ušima a standardním pojistným kolíkem M16; zadní mířidlo je nastavitelné pro boční korekci a má překlopné apertury pro blízké a dlouhé rozsahy.
Atributy
Color:
Black
Model:
10/22
Sight Color:
Black
Style:
Flip-Up
Udělat:
Ruger
Dodací hmotnost: 0,091kgVýška přepravy: 3mmŠířka přepravy: 79mmDélka přepravy: 147mm
Zvyšte přesnost vaší pušky RUGER® 10/22® s flip-up TSR100 mířidly. 🏹 Snadná instalace bez úprav a skvělý design pro každého střelce!
Provides Familiar M16 Service Rifle Sight Picture & Improved Accuracy
Replacement sight sets give your 10/22® a longer sight radius for improved accuracy potential, plus the same sight picture as an AR-15/M16 with military-issue sights. Installation requires no gunsmithing, no drilling/tapping, and no permanent alterations to the rifle. Rear sight mounts using the factory-provided holes for a scope base. All-steel front sight assembly has a standard detent-locking M16 post surrounded by protective ears that guard it from damage and misalignment. User may substitute any aftermarket post that replaces the standard A2. TSR100 set’s rear sight is adjustable for windage and features close-range and long-range flip-up apertures similar to the M16A2 sight.
SPECS: Front Sight - steel, blued, matte finish, .53" (13.4mm) wide, .90" (23mm) high. Rear Sight - aluminum, black finish. 2.9" (7.4cm) long, .94" (24mm) tall. Sold as front/rear sight sets. Includes mounting screws.
Další...
Poskytuje známý obraz míření vojenské pušky M16 a lepší přesnost
Náhradní sady mířidel poskytují vaší 10/22® delší rádius míření pro lepší potenciál přesnosti, stejně jako stejný obraz míření jako u AR-15/M16 s vojenskými mířidly. Instalace nevyžaduje žádné zásahy zbrojíře, vrtání/závitování a žádné trvalé úpravy pušky. Zadní mířidlo se montuje pomocí továrně předvrtaných otvorů pro montáž zaměřovače. Celokovová sestava předního mířidla má standardní pojistný M16 kolík obklopený ochrannými ušima, která jej chrání před poškozením a nesprávným zarovnáním. Uživatel může nahradit jakýkoliv aftermarketový kolík, který nahrazuje standardní A2. Sada TSR100 má zadní mířidlo nastavitelné pro boční korekci a obsahuje blízké a dlouhé rozsahy překlopných apertur podobně jako mířidlo M16A2.
SPECS: Přední mířidlo - ocel, modřená, matný povrch, .53" (13.4mm) široké, .90" (23mm) vysoké. Zadní mířidlo - hliník, černá úprava. 2.9" (7.4cm) dlouhé, .94" (24mm) vysoké. Prodáváno jako sady předních/zadních mířidel. Obsahuje montážní šrouby.
Další...
Hodnocení zákazníků pro položku TECH SIGHTS RUGER® 10/22® FLIP-UP TSR100 GI-STYLE SIGHT SET BLACK
Počet hodnocení: 16
Od brownells.com: 16
Průměrné hodnocení: 4,6
Unbeatable upgrade for stock 1022(18.4.2011)
The Tech-Sight TSR100/TSR200 simply replaces the factory sights and very easy to install. The Ruger rear sight is assembled to the rear of the barrel. The Tech-Sights rear sight is installed to the rear of the receiver increasing the sight radius by a whooping 8 inches which translates to better accuracy with an iron sight. Combine that advantage to a rugged GI style front and rear sight with genuine AR15 sight components and you have a winner. With a very attractive price tag to go along with it, it deserves a 5 star rating.
Great sights(26.6.2011)
Very well made sights that are easy to install and work very well. they made the gun look much better, and i love the sight picture.
Excellent iron sights for a stock 10/22(20.7.2011)
Tech Sights are an outstanding alternative to scoping your 10/22. They're lighter and tougher, too.
A Must Have for Your Ruger 10/22!(21.7.2011)
The Tech Sights for the Ruger 10/22 are much, much better that the factory sights. Installation takes about 15 minutes and is easy.
The "large" aperture seems a bit small compared to a real A2 sight but did not cause any issues when shooting.
Great Sights(19.10.2011)
They are a little large on such a small rifle, but work great. After zeroing, I can easily switch between apertures without having to rezero.
Great Fit and Function(3.2.2012)
Installed easily. I really like the battle rifle look especially when coupled with a flash suppressor. Zeros easily.
Great sights(26.3.2012)
These are a great addition to your .22lr. If you are spending some money to spruce up your rifle, I'd suggest picking these up as well. Along with some trigger parts and a smoother action, these make shooting your 10/22 fun again.
FYI, If I was shooting an appleseed, I'd get the 200s instead. The extra adjustability is nice (though not necessary).
Awesome sights(27.5.2012)
These sights are awesome. They are a good value and installation was a breeze. The only complaint I had was how difficult they were to adjust. Maybe the manufacturer has a tool, I do not know. But it took all of 10 minutes to install and I got lucky with sighting in, I was only 3" off of bullseye at 25yds. They seem to hold zero well and feel durable. But the main part about installation that was vague was the screw in the front. Install it first then slide it into the dovetail, just don't tighten it down before doing so.
A must have!(10.7.2012)
Super M-16 A2 style sights. Vastly superior to the factory sights. Easy to install, and very user friendly if you like the M-16 type sights. Before the install I could barely get on the factory sights, and could barely hit paper. With these sights at 25m I do as well as with my issue M-4 (5 round strings all holes touching). Some say they are hard to adjust, but you just use a nail to press down the detent and then turn the adjustment.
Best iron sight upgrade for the 10-22(9.11.2012)
Finally decided to buy the T100 set and glad I did. Easy to install and far superior to the factory sights. Makes shooting the 10-22 fun all over again. I bought an AR rear sight tool made my adjustments and its done. I have shot many rounds with this set up and it has not come loose or shifted point of impact after disassembly of the rifle for cleaning. Excellent buy.
Great sights much better than factory(15.3.2013)
Great sights eazy to install Much better than the Ruger factory sights
Great sights(11.7.2013)
Great sights to help turn my 10/22 into a training rifle. However it was a bummer that the screws had to be ordered separately from the manufacturer.
Great Buy!!(15.8.2013)
I got my tsr100 sight set in the mail today it only took 3 days to ship to ohio and they look awesome and are extremely simple to install
it comes with the screws!(25.3.2014)
nice sights, easy to install and fun to use. it comes with the ruger base screws. wish I had waited for it to arrive before I ordered them! guess it doesn't hurt to have a few extras.
peep sights are easier and faster to aim(21.1.2015)
for a 10/22, all you need are tech sights and a target hammer
Stock sights are better(4.8.2018)
Mounted these on my 10 22 used for target shooting at both 25 yds and 50. Mounting very simple easy directions to follow. Adjustment for windage no problem however, gun always shoots very high. The only elevation adjustment is the front postand and adjusted to maximum but still not enough to bring point of impact down. Went back to original sights which work fine. Very disappointed.