Depresses spring-loaded detent to free the pivot pin for removal. Virtually impossible without this tool. Does not fit Colt Mfg. AR-15’s with large front pivot pin.
SPECS: Blued steel. 1-7⁄8" (4.8cm) long.
Další...
Stlačuje pružinový záchyt, aby uvolnil kolíkový čep pro demontáž. Bez tohoto nástroje je to prakticky nemožné. Není kompatibilní s AR-15 od Colt Mfg. s velkým předním kolíkovým čepem.
Hodnocení zákazníků pro položku BROWNELLS PIVOT PIN DEPRESSOR
Počet hodnocení: 1
Od brownells.com: 1
Průměrné hodnocení: 5
Changing Pivot Pins? Get this!!(7.11.2011)
I ordered this Pivot Pin Dentent Depressor specifically to review for my fellow AR-15 builders and enthusiasts. Again, Brownells has another must have tool for AR-15 assembly! This Depressor is very small (about the size of a small Allen key), but makes a HUGE difference.
I was replacing the original pivot pins on my Spike's Tactical "Punisher" Lower receiver with a set of TSD Punisher pins. If it wasnt for this tool, I probably would have lost my dentent and spring....and possibly would not have been able to remove the pivot pin itself.
The tool appears to be well made and works very easily. It simply slides into the body of the front pivot pin and depresses the detent and spring with it's sharp edge. Once depressed, you pull the pin out while being careful to cup your hand over the front of the receiver in case of accidental launch of the dentent and spring. That's it! Now use the Pivot Pin Detent Installation Tool to re-install your new pins!
This tool is a must have in your AR-15 tool arsenal. I would highly recommend and would say it is worth it's weight in gold!
Produkt č.: 080216010 BROWNELLS PIVOT PIN DEPRESSOR050806101708 Stlačuje pružinový záchyt, aby uvolnil kolíkový čep pro demontáž. Bez tohoto nástroje je to prakticky nemožné. Není kompatibilní s AR-15 od Colt Mfg. s velkým předním kolíkovým čepem.
459CZK231459,00 Kč
*
Dodací lhůta je přibližně 14-21 dní. Více než 10 ks. skladem USA
Depresses spring-loaded detent to free the pivot pin for removal. Virtually impossible without this tool. Does not fit Colt Mfg. AR-15’s with large front pivot pin.
SPECS: Blued steel. 1-7⁄8" (4.8cm) long.
Další...
Stlačuje pružinový záchyt, aby uvolnil kolíkový čep pro demontáž. Bez tohoto nástroje je to prakticky nemožné. Není kompatibilní s AR-15 od Colt Mfg. s velkým předním kolíkovým čepem.
Hodnocení zákazníků pro položku BROWNELLS PIVOT PIN DEPRESSOR
Počet hodnocení: 1
Od brownells.com: 1
Průměrné hodnocení: 5
Changing Pivot Pins? Get this!!(7.11.2011)
I ordered this Pivot Pin Dentent Depressor specifically to review for my fellow AR-15 builders and enthusiasts. Again, Brownells has another must have tool for AR-15 assembly! This Depressor is very small (about the size of a small Allen key), but makes a HUGE difference.
I was replacing the original pivot pins on my Spike's Tactical "Punisher" Lower receiver with a set of TSD Punisher pins. If it wasnt for this tool, I probably would have lost my dentent and spring....and possibly would not have been able to remove the pivot pin itself.
The tool appears to be well made and works very easily. It simply slides into the body of the front pivot pin and depresses the detent and spring with it's sharp edge. Once depressed, you pull the pin out while being careful to cup your hand over the front of the receiver in case of accidental launch of the dentent and spring. That's it! Now use the Pivot Pin Detent Installation Tool to re-install your new pins!
This tool is a must have in your AR-15 tool arsenal. I would highly recommend and would say it is worth it's weight in gold!