Lightweight, all steel triggers with rolling sear block design provide single-stage pull for military rifles.
SPECS: Mark II Trigger: Adjusts for overtravel and pull (2 to 7 lbs.). 3⁄16" wide serrated trigger. Blued steel housing and trigger, hardened internals. Wt. 2 oz. EW-5 fits 1917 Enfield w/5-round magazine plus 1914 .303 Enfield, Rem. Mod 30 and 30S. EW-6 fits same as EW-5 but w/6-round magazine. UM fits Mauser 98 and commercial actions. GM fits Swedish and other Mauser 93 thru 96's; US fits 03 and 03A3 Springfield.
Zakázkové spouště pro vojenské pušky
Lehké, zcela ocelové spouště s designem kloubového zámku poskytují jednopolohový odpor pro vojenské pušky.
SPECIFIKACE: Mark II spoušť: Upravuje se pro přetahování a odpor (2 až 7 lbs). 3⁄16" široká vroubkovaná spoušť. Modřená ocelová skříň a spoušť, zpevněné vnitřnosti. Hmotnost 2 oz. EW-5 se hodí pro 1917 Enfield s 5-nábojovým zásobníkem plus 1914 .303 Enfield, Rem. Mod 30 a 30S. EW-6 se hodí stejně jako EW-5, ale s 6-nábojovým zásobníkem. UM se hodí pro Mauser 98 a komerční akce. GM se hodí pro švédské a jiné Mauser 93 až 96; US se hodí pro 03 a 03A3 Springfield.
Atributy
Model:98
Style:Adjustable
Typ zbraně:Mauser
Dodací hmotnost:0,023kg
Výška přepravy:8mm
Šířka přepravy:64mm
Délka přepravy:150mm
Detail produktů
Made in USA
US exportní klasifikace: 0A501.c
Recenze zákazníků
Hodnocení zákazníků (10)
4,9 / 5
Rozhodně doporučuji
Yugo M48 installation 29.5.2018
Great trigger once installed. Easy install on the receiver but the stock required inleting. Took about 1.5 hours of carefully removing elm stock material behind the original inlet. About 3/8 wide and as deep cut out back to 3/8" of rear receiver pillar. When first installed, I did not take enough material out and the bolt would bind on cocking when the receiver screws were tightened. Removed more material with the dremel. Trigger guard was fine but I opened the trigger hole slightly. Good pull with a hint of two stage, very crisp break. Well worth the effort.
Rozhodně doporučuji
Excellent kit .org 17.8.2017
Have used this conversion on three 17s to date this order is to do 3 14s and 1 17.Easy to install with excellent trigger will go down to 1.75 with ease. Watch the trigger frame when first installed for proper clearance.
Rozhodně doporučuji
Love it. 25.7.2017
I chose the D-T over Timney because the Timney buckles up tight against the receiver and is hard to push the bolt over the sear. The D-T uses the spring as found in original Swedes so bolt slides over the sear smoothly, and flexes just like the original. Trigger is crisp.
I wish they made this trigger with a safety like the Timney.
Rozhodně doporučuji
Very satisfied 16.3.2017
Installed on a Yugo 24/47 with military stock and used a dremel to remove minor excess wood inside the stock for trigger clearance.
Fits perfect.
Rozhodně doporučuji
1st Class Trigger 19.2.2016
Used this trigger in a custom VZ-24 with a rebarreled with a new 8x57 barrel in a McMillan. Easiest Mauser trigger I've ever installed. Adjustments are easy and trigger breaks very clean and at consistent pull weight. I'd rank this trigger right up there with Timney for feel and function, also really like the steel construction.
Rozhodně doporučuji
Better than I thought it would be 10.2.2014
I put this trigger on a Czech Brno mauser 98.It fit perfectly and didn't need any modification. I was able to eliminate creep and set the pull to a very low setting. I would estimate it to be around 1 lb. I am very surprised this trigger came out this well on this old mauser. This trigger is actually better after I adjusted it than the factory triggers on my modern rifles. I also bought and installed a Bold's on another mauser and I can't seem to get it as good as this one. I have bought a second Dayton Traister for another mauser 98 I am building.
Rozhodně doporučuji
THE BEST 19.4.2012
Anyone with a 98 conversion should use this trigger. Simple, straightforward, and absolutely easy to install. In a vz-24 nothing could be better for a sporter conversion
Rozhodně doporučuji
speedy 22.7.2011
I have two, and need one more. Light gunsmithing required. It does increase the bolt lift weight, but that is the trade off for coc on open w/ speedlock. I gave it five stars because it excels at everything it is supposed to do.
Rozhodně doporučuji
"I would buy this 7 days a week" 14.5.2011
Instalation within seconds on the action/reciever; you will though have to make room in the stock if you are use the Miltray stock.
Doporučuji
I would buy this product again 22.7.2010
I have found that this product works beter with soft Russian primers as miss-fires can occur with some hard primers. This is obviously due to the shorter striker fall/travel. A great product and recommended for its ease of fitting and use.
Objevte spoušť MARK II od DAYTON TRAISTER! 🎯 Nastavitelný tah a celokovový design pro vojenské pušky. Ideální pro Mauser 98 a další.
Prohlášení o kontrole do destinace: "Tyto položky jsou kontrolovány vládou Spojených států a jsou povoleny na vývoz pouze do země konečného určení k použití konečným příjemcem nebo konečným uživatelem (uživatel,), kteří jsou zde identifikováni. Nesmějí být dále prodány, přepraveny ani jinak zlikvidovány v žádné jiné zemi nebo jiné osobě, než je oprávněn konečný příjemce nebo koncový uživatel, a to buď v jejich původní formě nebo po začlenění do jiných položek, aniž by nejprve získali souhlas od vlády USA nebo byly jinak povoleny."
This item is controlled by the U.S. government and authorized for export only to the country of ultimate destination for use by the ultimate consignee or end-user(s) herein identified. It may not be resold, transferred, or otherwise disposed of, to any other country or to any person other than the authorized ultimate consignee or end-user(s), either in their original form or after being incorporated into other items, without first obtaining approval from the U.S. government or as otherwise authorized by U.S. law and regulations.
Více než 120 ručně kreslených ilustrací a příkladů od profesionálního ryteckého umělce Lee Griffithse.
Plná solidních rad ohledně designu, přímých pokynů a stran poznámek, které pomohou rytcům, zlatníkům, umělcům a dalším řemeslníkům naučit se lépe kreslit.
Témata zahrnují návrh s rozpočtem, negativní a pozitivní prostor, použití více ornamentů ve vzoru, překrývající se a vzájemně zapadající prvky, okraje, listy, květiny, stínování a sklady.