Košík je prázdný.

Košík

Help a kontakt

Doprava zdarma při nákupu nad 5 999,00 Kč

100denní politika vrácení

Novinky

Slevy

Přes 300 000 zákazníků - děkujeme vám!

4,93/5 "Velmi dobré" (1400+ hodnocení)

40 000+ produktů pro lov a střelbu

KNS PRECISION
M16/M4 NON-ROTATING SEAR PIN

851876003066 923000043

Steel pin replaces original pin and locks into place against the take-down pin on M16/M4 rifles to prevent rotation and wear on receiver holes. Drop-in installation requires no tools or gunsmithing.

SPECS: Steel, matte black phosphate finish. Fits M16/M4 receivers only.

Další...

Ocelový kolík nahrazuje původní kolík a zamyká se na místě proti vyjímatelnému kolíku u pušek M16/M4, aby zabránil rotaci a opotřebení otvorů v přijímači. Instalace typu drop-in nevyžaduje žádné nářadí ani zásah zbrojíře.

SPECS: Ocel, matný černý fosfátový povrch. Vhodné pouze pro přijímače M16/M4.

Další...

Hodnocení zákazníků pro položku KNS PRECISION M16/M4 NON-ROTATING SEAR PIN

Počet hodnocení: 6
Od brownells.com: 6
Průměrné hodnocení: 2,8

VERY DISAPPOINTED (6.7.2013)

I was surprised and disappointed with this product. After using KNS products for years in both duty and personal weapons without any problems I was surprised this product did not work. As usual for KNS, it is well made. However I found the arm / plate was too long, making an
extremely tight fit. There was so much tension on the pin that it caused the auto sear to bind, thus becoming inoperative. Attempted to install in 2 different Colt M-16A1's with the same result. KNS makes great products but the mensions on the 1 I received were not correct for a proper fit and function.

Works fine in a few NFA receivers (9.12.2013)

I have not had an issue with a few Colt A1/A2s and some other NFA RR installs. Could be a tolerance stackup in both the receiver as well as the KNS part.

It is worth saving the NFA item either way.

Not living up to the KNS reputation (21.12.2015)

KNS prides themselves on tight fit but the sear anti rotation pin was TOO tight. The sear could not rotate when installed on the KNS pin, resulting in no auto fire and uncontrollable falling of the hammer with the bolt carrier in auto.

I got a few of these to have in stock, they are all going back.

Limited fitment (6.4.2016)

This only works on Colt. I was told by KNS Built off Colt specs. Make sure your sear pin on right side of lower is directly above your safety ( 12:00 position ). Or this will be worthless!

<img width="500" src='/userdocs/reviewimages/84c1f61e-7bc5-45e7-b252-8024069b97de.jpg' alt=''>

This part is better than you think!! (27.11.2016)

As I have a bit of a difference in my experience with this part, I'll let it suffice to say the following:

Each and every "Mil-Spec" receiver has it's own minute differences. With a thousandth diff in spec from one to another, can easily cause the binding described by others.

The one I installed in a Spike's Lower was fitted properly and works as expected. The customer was very satisfied, as are the community being protected by him...

Not all recievers are created equal (2.11.2017)

I hardly ever write a review, but this product fits and works perfectly in my Sendra receiver. Which is true mill spec.

You can't blame this product for the receiver manufacturer drilling the pin hole in the wrong place. And yes a little bit matters.

Přečtete si další hodnocení na webu brownells.com

1799 1799 1 CZK

Produkt č.: 923000043
KNS PRECISION M16/M4 NON-ROTATING SEAR PIN
Číslo výrobce: NRSEAR 851876003066 Ocelový kolík nahrazuje původní kolík a zamyká se na místě proti vyjímatelnému kolíku u pušek M16/M4, aby zabránil rotaci a opotřebení otvorů v přijímači. Instalace typu drop-in nevyžaduje žádné nářadí ani zásah zbrojíře.

1799 CZK 0 1 799,00 Kč *

Předbjednávka, dodací lhůta je přibližně 4-12 týdny ze skladu z USA.

Vlastnosti: Make: AR-15

Vložit do nákupního seznamu

Zeptejte se

Podrobnosti

Vložit do nákupního seznamu

Zeptejte se

Atributy

Udělat: AR-15 Dodací hmotnost: 0,005kg Šířka přepravy: 53mm Délka přepravy: 99mm UPC : 851876003066

Detail produktů

Made in USA

Získejte M16/M4 NON-ROTATING SEAR PIN od KNS PRECISION. 🛠️ Ocelový kolík zabraňuje rotaci a opotřebení. Snadná instalace bez nářadí!

Steel pin replaces original pin and locks into place against the take-down pin on M16/M4 rifles to prevent rotation and wear on receiver holes. Drop-in installation requires no tools or gunsmithing.

SPECS: Steel, matte black phosphate finish. Fits M16/M4 receivers only.

Další...

SPECS: Ocel, matný černý fosfátový povrch. Vhodné pouze pro přijímače M16/M4.

Další...

Hodnocení zákazníků pro položku KNS PRECISION M16/M4 NON-ROTATING SEAR PIN

Počet hodnocení: 6
Od brownells.com: 6
Průměrné hodnocení: 2,8

VERY DISAPPOINTED (6.7.2013)

Works fine in a few NFA receivers (9.12.2013)

I have not had an issue with a few Colt A1/A2s and some other NFA RR installs. Could be a tolerance stackup in both the receiver as well as the KNS part.

It is worth saving the NFA item either way.

Not living up to the KNS reputation (21.12.2015)