QUINETICS
KINETIC BULLET PULLER

899228001018 734001000

Saves Bullets & Components Features "New-Twist" Chuck

Hammer-style, "Ultimate" model removes bullets quickly without damage to bullet or case. Bullet, powder and case can be removed from puller without taking off the cap. Universal, .22 center fire thru .45 caliber, (except .25 ACP), three-jaw chuck locks and releases case with just a quarter-turn of the cap. Easy to see when bullet has been extracted. Handle is made of alloy with molded grip. Space age plastic body carries lifetime guarantee against breakage. Easy and convenient to use whether checking an occasional reload or pulling hundreds of bullets.

SPECS: Overall length 11-5/8" (29.5cm).

Další...

Šetří střely a komponenty s funkcí "New-Twist" Chuck

Hammer-style model "Ultimate" rychle odstraní střely bez poškození střely nebo nábojnice. Střela, střelný prach a nábojnice mohou být vyjmuty z pulleru bez nutnosti sundání víčka. Univerzální, pro střední palné zbraně od .22 do .45 kalibru, (kromě .25 ACP), tříčelistý sklíčidlo uzamkne a uvolní nábojnice pouhým čtvrt otočení víčka. Snadno je vidět, kdy byla střela extrahována. Rukojeť je vyrobena ze slitiny s formovaným úchopem. Tělo z plastu nové generace má doživotní záruku proti lámání. Snadné a pohodlné použití, ať už kontrolujete občasné přebíjení nebo vytahujete stovky střel.

SPECIFIKACE: Celková délka 11-5/8" (29,5 cm).

Další...

Hodnocení zákazníků pro položku QUINETICS KINETIC BULLET PULLER

Počet hodnocení: 4
Od brownells.com: 4
Průměrné hodnocení: 4,3

Knock Out Tool (9.2.2011)

I am not sure I need to add much other than to say, I have had my puller for 10 years and use it all the time and it just keeps going.
Possibly some of the best spent money on tools for me. Other options are expensive and time consuming.
If I needed another for some reason I would get one of these, "No Questions Asked"

If you buy this get a replacement collet (24.3.2013)

Worked well. But, after pulling < 100 bullets the rim on the collet pulled off. The last batch I pulled was 47 bullets, and I know I pulled less than 50 prior to that.

Now the collet won't grasp the cartidge tight enough to prevent it from sliding into the bullet/powder chamber. A collet made of a tougher material would be a big improvement, and I'm not about to use a shell holder (because of safety reasons) to replace the collet.

ALMOST perfect (16.4.2017)

I bought this after the previous puller I had broke during use--that was the second one where the striking end of the head broke open. I got this in the mail earlier this week and have pulled somewhere around 150 9mm, .45 ACP, and 5.56mm rounds.

This thing is much, MUCH better than the ones I've had in the past. One collet, that's it. No worrying about snapped O-rings or lost collet pieces or remembering which collet goes with each caliber.

One twist or a twist and a half opens the collet up to accept the round, twist it back tight in the other direction until it's snug. Whack the head against a hard surface until the bullet pulls. One or one-and-a-half twists to open, dump the components, then repeat. Much easier than pulling the collet or trying to get the brass out from the older versions.

It's almost perfect. I say "almost," because I'd make two changes. First, I find the handle to be just a bit too small in circumference. It's not that easy to grasp with a strong grip, which means you may not get as much force as you'd like to pull the bullet. And, sometimes, there's an unpleasant vibration in the handle because of the size.

The other thing I'd change is that the material that holds the collet pieces together just looks flimsy to me. It's a good thing I rarely have to open the end completely, because it looks to me like the collet is on the verge of coming apart--and it has since the day I got the product.

While the instructions are pretty thin, the product was pretty easy to figure out. The construction is similar to other products in this class, so we'll have to see how durable it is. I like it a lot and would definitely recommend this particular one over the other products in the same category to folks I know looking for this kind of device.

Modify to save rifle bullets (9.1.2018)

Force a piece of memory foam into the bottom if you want to save your bullet's tip form damage. Especially with rifle rounds that are pointy, because the angled part doesn't protect the tip of those rounds from smashing into the bottom. recovered my ELD-M rounds used to setup my 6.5CM dies. Obviously no powder was used during this bullet-pulling operation, memory foam would make that difficult to recover all the powder. Just my $0.02.

Přečtete si další hodnocení na webu brownells.com

0 0 1 CZK

Produkt č.: 734001000
QUINETICS KINETIC BULLET PULLER
Číslo výrobce: BP100 899228001018 Hammer-style model "Ultimate" rychle odstraní střely bez poškození střely nebo nábojnice. Střela, střelný prach a nábojnice mohou být vyjmuty z pulleru bez nutnosti sundání víčka. Univerzální, pro střední palné zbraně od .22 do .45 kalibru, (kromě .25 ACP), tříčelistý sklíčidlo uzamkne a uvolní nábojnice pouhým čtvrt otočení víčka. Snadno je vidět, kdy byla střela extrahována. Rukojeť je vyrobena ze slitiny s formovaným úchopem. Tělo z plastu nové generace má doživotní záruku proti lámání. Snadné a pohodlné použití, ať už kontrolujete občasné přebíjení nebo vytahujete stovky střel.

Upozornit na dostupnost

Neznáma dostupnost

Vlastnosti: Kalibr: Universal

Vložit do nákupního seznamu

Zeptejte se

Podrobnosti

Vložit do nákupního seznamu

Zeptejte se

Top takeaways

Univerzální použití pro střední palné zbraně od .22 do .45 kalibru (kromě .25 ACP) s tříčelistým sklíčidlem.
Rukojeť ze slitiny s formovaným úchopem a tělo z plastu nové generace s doživotní zárukou proti lámání.
Snadné a pohodlné použití s možností vyjmutí střely, střelného prachu a nábojnice bez sundání víčka.

Atributy

Caliber: Universal Dodací hmotnost: 0,181kg Výška přepravy: 10mm Šířka přepravy: 142mm Délka přepravy: 351mm UPC : 899228001018