Snaps into the opening at the rear of the Glock® grip frame for a cleaner appearance, plus keeps dust, dirt, snow and water out of the gun. Creates a perfect location for adding extra weight to competition guns or to counter recoil on light, carry guns. Easily removed, does not alter gun. See specs for proper fit to your model of Glock.
Zacvakne se do otvoru na zadní straně rukojeti Glock® pro čistší vzhled a zároveň zabraňuje vnikání prachu, nečistot, sněhu a vody do zbraně. Vytváří ideální místo pro přidání extra závaží u soutěžních zbraní nebo pro vyvážení zpětného rázu u lehkých zbraní pro nošení. Snadno se odstraní a neupravuje zbraň. Pro správné pasování na váš model Glocku se podívejte na specifikace.
SPECS: JP-1 Pasuje na modely Gen 3: 17, 19, 22, 23, 31, 32, 34, 35. JP-2 Pasuje na modely Gen 3: 26, 27, 33.
Další...
Hodnocení zákazníků pro položku JENTRA FITS GLOCK®
Počet hodnocení: 19
Od brownells.com: 19
Průměrné hodnocení: 4,2
Gen 4 Grip plug(19.2.2015)
After three month on my hip, the grip on my Gen4 G23 had a substantial amount of lint filling the rear void behind the magazine. I installed the grip plug to keep foreign matter out of the trigger mechanism and it seems to be working nicely. If there were anything negative about filling this void, it might be that this plug could slow an emergency reload, creating delays if the magazine failed to drop free as the pre-plug void in the grip allows my thumb to securely grab the magazine and strip it free; this is especially true during type 3 malfunction drills. However, in normal use my G23 has never failed to freely drop magazines... so I'll keep the plug and take my chances.
Must Have(29.1.2017)
glock 21 "SF"(8.7.2010)
SF stands for small frame. It doesn't fit a 3rd generation model 21. Its too small.
Does NOT fit 21 SF(31.3.2012)
this plug did not fit my 21 SF. Pushed into grip and the button engaged the lanyard hole but was not flush with grip bottom. At least 1/8" from going in all the way.
Waste of money(11.9.2017)
Plug does not fit flush on the bottom of the 21SF grip. Do NOT buy.
Fits that hole PERFECTLY(18.11.2009)
This plug fit the Glock 34 peerfectly. Now it looks like a "real" gun. picture does not do it justice.
Great Fit(6.8.2010)
Agreed picture doesn't do the item justice, this is a definite buy for anyone packing a Glock for CCW
Excellent!!!(3.9.2010)
Plug is easy to snap in and looks great on any glock, does not add much weight, well worth [$]
Hole is plugged.(26.7.2011)
Fit my 21 perfectly.
looks great!!(30.7.2012)
fit like a glove, very easy to put in, a must have for a good price!
Fits like it was made by GLOCK(24.2.2013)
Fit my G22 perfectly!
Perfect Fit(23.8.2013)
Looks and fits like a factory part
Does not fit in Glock 20SF(19.3.2014)
This did not fit in my Glock 20SF unfortunately. However, I have used these grip plugs before in other Glocks and they work great so I still give it 5 stars.
Stays put(4.9.2016)
I bought 3 of them for my guns, one 2nd generation and two 3rd generation. They don't add any length, look good and fit tightly in all models without getting in the way of the magazine. Easy to put in and take out.
perfect addition(11.10.2009)
just enough to fill the hand out, but still keeps it's low profile for perfect concealment.
Bad Design - Causes magazines to snag(21.1.2014)
The JP-3 plug is a poor design. It install easily enough, but creates a ledge with the bottom of the magazine well which will cause the back end of your magazine to snag during reloading. A Glock grip plug should create a smooth snag-free surface to facilitate reloads. A little extra plastic bevel is all that is needed. This model stinks.
great fit and good price (10.9.2016)
Will tell glock here in Mesa where to get them
Great buy(8.12.2011)
Installs in seconds with a perfect fit for the G26. It keeps the gun sealed up so lint and dirt etc. will not get to the action or anything. I use the gun as a carry gun and got sick of cleaning crud out of the grip on a weekly basis and this does the trick. For the price you can't go wrong and will pay for it's self in no time at all. Just from not having to clean it out all the time and cleaning supplies
Glock plug(7.1.2012)
One of the best investments a Glock owner can make.
Produkt č.: 463100017 JENTRA FITS GLOCK® Číslo výrobce: JP-1820103357203 Zacvakne se do otvoru na zadní straně rukojeti Glock® pro čistší vzhled a zároveň zabraňuje vnikání prachu, nečistot, sněhu a vody do zbraně. Vytváří ideální místo pro přidání extra závaží u soutěžních zbraní nebo pro vyvážení zpětného rázu u lehkých zbraní pro nošení. Snadno se odstraní a neupravuje zbraň. Pro správné pasování na váš model Glocku se podívejte na specifikace.
Made in USA
US exportní klasifikace: 0A501.y.1
Prohlášení o kontrole do destinace: "Tyto položky jsou kontrolovány vládou Spojených států a jsou povoleny na vývoz pouze do země konečného určení k použití konečným příjemcem nebo konečným uživatelem (uživatel,), kteří jsou zde identifikováni. Nesmějí být dále prodány, přepraveny ani jinak zlikvidovány v žádné jiné zemi nebo jiné osobě, než je oprávněn konečný příjemce nebo koncový uživatel, a to buď v jejich původní formě nebo po začlenění do jiných položek, aniž by nejprve získali souhlas od vlády USA nebo byly jinak povoleny."
This item is controlled by the U.S. government and authorized for export only to the country of ultimate destination for use by the ultimate consignee or end-user(s) herein identified. It may not be resold, transferred, or otherwise disposed of, to any other country or to any person other than the authorized ultimate consignee or end-user(s), either in their original form or after being incorporated into other items, without first obtaining approval from the U.S. government or as otherwise authorized by U.S. law and regulations.
Získejte GRIP PLUG pro GLOCK® od JENTRA! 🌟 Čistější vzhled a ochrana proti prachu a vodě. Ideální pro soutěžní zbraně.
Snaps into the opening at the rear of the Glock® grip frame for a cleaner appearance, plus keeps dust, dirt, snow and water out of the gun. Creates a perfect location for adding extra weight to competition guns or to counter recoil on light, carry guns. Easily removed, does not alter gun. See specs for proper fit to your model of Glock.
Zacvakne se do otvoru na zadní straně rukojeti Glock® pro čistší vzhled a zároveň zabraňuje vnikání prachu, nečistot, sněhu a vody do zbraně. Vytváří ideální místo pro přidání extra závaží u soutěžních zbraní nebo pro vyvážení zpětného rázu u lehkých zbraní pro nošení. Snadno se odstraní a neupravuje zbraň. Pro správné pasování na váš model Glocku se podívejte na specifikace.
SPECS: JP-1 Pasuje na modely Gen 3: 17, 19, 22, 23, 31, 32, 34, 35. JP-2 Pasuje na modely Gen 3: 26, 27, 33.
Další...
Hodnocení zákazníků pro položku JENTRA FITS GLOCK®
Počet hodnocení: 19
Od brownells.com: 19
Průměrné hodnocení: 4,2
Gen 4 Grip plug(19.2.2015)
After three month on my hip, the grip on my Gen4 G23 had a substantial amount of lint filling the rear void behind the magazine. I installed the grip plug to keep foreign matter out of the trigger mechanism and it seems to be working nicely. If there were anything negative about filling this void, it might be that this plug could slow an emergency reload, creating delays if the magazine failed to drop free as the pre-plug void in the grip allows my thumb to securely grab the magazine and strip it free; this is especially true during type 3 malfunction drills. However, in normal use my G23 has never failed to freely drop magazines... so I'll keep the plug and take my chances.
Must Have(29.1.2017)
glock 21 "SF"(8.7.2010)
SF stands for small frame. It doesn't fit a 3rd generation model 21. Its too small.
Does NOT fit 21 SF(31.3.2012)
this plug did not fit my 21 SF. Pushed into grip and the button engaged the lanyard hole but was not flush with grip bottom. At least 1/8" from going in all the way.
Waste of money(11.9.2017)
Plug does not fit flush on the bottom of the 21SF grip. Do NOT buy.
Fits that hole PERFECTLY(18.11.2009)
This plug fit the Glock 34 peerfectly. Now it looks like a "real" gun. picture does not do it justice.
Great Fit(6.8.2010)
Agreed picture doesn't do the item justice, this is a definite buy for anyone packing a Glock for CCW
Excellent!!!(3.9.2010)
Plug is easy to snap in and looks great on any glock, does not add much weight, well worth [$]
Hole is plugged.(26.7.2011)
Fit my 21 perfectly.
looks great!!(30.7.2012)
fit like a glove, very easy to put in, a must have for a good price!
Fits like it was made by GLOCK(24.2.2013)
Fit my G22 perfectly!
Perfect Fit(23.8.2013)
Looks and fits like a factory part
Does not fit in Glock 20SF(19.3.2014)
This did not fit in my Glock 20SF unfortunately. However, I have used these grip plugs before in other Glocks and they work great so I still give it 5 stars.
Stays put(4.9.2016)
I bought 3 of them for my guns, one 2nd generation and two 3rd generation. They don't add any length, look good and fit tightly in all models without getting in the way of the magazine. Easy to put in and take out.
perfect addition(11.10.2009)
just enough to fill the hand out, but still keeps it's low profile for perfect concealment.
Bad Design - Causes magazines to snag(21.1.2014)
The JP-3 plug is a poor design. It install easily enough, but creates a ledge with the bottom of the magazine well which will cause the back end of your magazine to snag during reloading. A Glock grip plug should create a smooth snag-free surface to facilitate reloads. A little extra plastic bevel is all that is needed. This model stinks.
great fit and good price (10.9.2016)
Will tell glock here in Mesa where to get them
Great buy(8.12.2011)
Installs in seconds with a perfect fit for the G26. It keeps the gun sealed up so lint and dirt etc. will not get to the action or anything. I use the gun as a carry gun and got sick of cleaning crud out of the grip on a weekly basis and this does the trick. For the price you can't go wrong and will pay for it's self in no time at all. Just from not having to clean it out all the time and cleaning supplies
Glock plug(7.1.2012)
One of the best investments a Glock owner can make.