Ghost trigger connectors for Glock® pistols replace the original, factory trigger connectors to give you a lighter, smoother trigger pull in one easy to install part. Factory polished for the smoothest operation, all Ghost connectors come with a 100% lifetime satisfaction guarantee. The Ghost 3.5 is a drop-in, 3.5lbs connector that is lighter and smoother than the original Ghost connector.
SPECS: Will fit Gen 1-4 all models except Glock models 42 or 43.
Další...
Zlehčuje & Zlepšuje Pocit ze Spouště
Konektory spouště Ghost pro pistole Glock® nahrazují originální tovární konektory a poskytují vám lehčí a hladší chod spouště v jednodílném snadno instalovatelném díle. Továrně leštěné pro nejhladší operaci, všechny konektory Ghost jsou dodávány se 100% zárukou doživotní spokojenosti. Ghost 3.5 je konektor s odpadem 3,5lb, který je lehčí a hladší než originální konektor Ghost.
SPECS: Vhodné pro modely Gen 1-4, kromě modelů Glock 42 nebo 43.
Další...
Hodnocení zákazníků pro položku GHOST 3.5 TRIGGER CONNECTOR
Počet hodnocení: 15
Od brownells.com: 15
Průměrné hodnocení: 4
Makes for a GREAT SMOOTH trigger job.(15.10.2009)
When this connector is used and installed properly with the 4 lb. striker spring and a little buffing, you can get an awesome trigger job. I've used many of these and NEVER had a complaint.
Easy Upgrade(12.5.2010)
Easy upgrade to a better trigger.
great product(12.9.2010)
I install this connector in my wifes G-19. Works great, she and my daughter improves the scores, and feel more confident with the gun.-
feels lighter just dry firing(7.10.2010)
you can feel a diffrence even dry firing it compared to the stock one.
Great trigger pull(22.3.2011)
Love the Glock, not thrilled with the trigger. Dropped in a Ghost 3.5 trigger connector with a Wolf light weight striker spring. Wow, sweet trigger now.
$ 12.99 wasted(24.7.2011)
My Glock 19 went full auto with this disconnector in place. Needless to say, I switched back to the factory disconnector at once.
Ghost 3.5 trigger connector(10.8.2012)
Bought the Ghost 3.5 trigger connector. Easy install. Also replaced striker spring with wolf lighter spring. These two work together great. Trigger is just where I want it. Great products.
You get what you pay for(16.8.2013)
It does slightly help, but in my opinion does more bad than good. Edges are sharp and cheaply made. No QA inspection were done in my opinion. Would recommend using only in emergency.
WASTE OF MONEY(14.10.2014)
VERY DISAPPOINTED. AM RETURNING THE ONES I BOUGHT.
EXPECTED A QUALITY PRODUCT. ONLY REDUCED THE STOCK 5.5 LB TRIGGER TO 5 LBS. HAD BEEN USING A
DIFFERENT BRAND WITH EXCELLENT 3.5 LB RESULTS BUT DECIDED TO TRY THE GHOST. REGRET THAT NOW.
Know What You Are Doing(25.4.2015)
I have installed this connector and springs in several Glock pistols of different calibers. Two were competition guns for an LEO and his wife. When installing I carefully polished EVERY SINGLE piece of steel in the trigger/safety system. When the parts look like chrome they are polished enough. The reason is that burnt power residue will not stick to them as easily when they are smooth and shiny. They also interact much more smoothly and give consistent results. All of my Glock pistols have the Ghost triggers/connector and are totally polished (every single piece). Works like a charm! Try it you will like it.
Reduced my group at 7 yds from 8" to 3"(16.1.2017)
Glock Perfection my arse... this trigger was a very easy installation. Watching youtube videos made it a straightforward trigger job. Only took 2 minutes to do. But it made the trigger better, crisp, linear, with no more "walls" to overcome. With my current CCW, I'm used to shooting 2" groups at 7 yds (small target using same ammo as with G30S for control). Couldn't shoot the G30S worth a darn. "It'll take time" they said, "to get used to the glock trigger." How much time and and how many $$$ in ammo? With this trigger job, it only took $12 and 2 minutes later, I now can start considering the G30S as a CCW. Not quite there yet but finally headed the right direction. Not giving full 5 stars b/c mine registers 4.5# instead of the advertised 3.5# (yeah I already checked I did get the 3.5# one)
I got it because I was excited about a better trigger, well I got it and installed it, and there was zero difference in my trigger. $12 wasted because I could have just left the factory one in place it would work just the same
Liked it.(11.10.2017)
Better, lighter trigger pull.
Not 3.5 More what I really wanted(9.1.2018)
Got this in hopes to improve the trigger in a Polymer 80 build. I originally installed all Glock OEM parts in the frame and slide. At first check the trigger was at 8#+ using a spring gauge, probably not the most accurate but it is a base line. After installing the Ghost 3.5 Trigger Connector and polishing all the contact edges of the Glock OEM parts with 600 grit cloth the trigger pull tested at 4 to 4.5#. Just right, even though it didn't make the 3.5# it's really the trigger that I wanted.
Works as advertised. Great price.(30.8.2018)
I got this for my glock 23 generation 3. It drops right in and fits like the factory as advertised with no adjustment needed. It is rather very light and I can't give you an exact poundage on the trigger pull, but I personally wouldn't use this on a carry weapon and I understand that some people would prefer to do it. My reason is for safety because the stoppage where you pull the trigger and take off all the slack and hit the wall where you know it's going to activate the firing pin next is non-existent. Okay, maybe non-existent is exaggerating it, but if you trained yourself to feel that wall, then you may accidentally fire a round and spook yourself as I did when trying to get familiarized with the new trigger connector. The wall is very light and short when compared to the OEM trigger connector. It is for this reason I would opt to not use this on a carry weapon. I want to minimize the accidental discharge of a firearm in a scenario where I draw or take out my weapon and the trigger barely nicks or gets caught on something and it goes off because the trigger was so light. This trigger connector does however make a fun range toy and improves accuracy somewhat for rookie shooters because it minimizes the application of uneven force applied to the trigger too far to the right or left by taking away that wall. Im very satisfied with this trigger connector and will not have to ruin the trigger pull poundage on my stock OEM trigger connector by doing a .25 cent polish job.
Produkt č.: 100000936 GHOST 3.5 TRIGGER CONNECTOR Číslo výrobce: GHO_2105-B-O644406999676 Konektory spouště Ghost pro pistole Glock® nahrazují originální tovární konektory a poskytují vám lehčí a hladší chod spouště v jednodílném snadno instalovatelném díle. Továrně leštěné pro nejhladší operaci, všechny konektory Ghost jsou dodávány se 100% zárukou doživotní spokojenosti. Ghost 3.5 je konektor s odpadem 3,5lb, který je lehčí a hladší než originální konektor Ghost.
599CZK0599,00 Kč
*
Předbjednávka, dodací lhůta je přibližně 4-12 týdny ze skladu z USA.
Made in USA
US exportní klasifikace: 0A501.x
Prohlášení o kontrole do destinace: "Tyto položky jsou kontrolovány vládou Spojených států a jsou povoleny na vývoz pouze do země konečného určení k použití konečným příjemcem nebo konečným uživatelem (uživatel,), kteří jsou zde identifikováni. Nesmějí být dále prodány, přepraveny ani jinak zlikvidovány v žádné jiné zemi nebo jiné osobě, než je oprávněn konečný příjemce nebo koncový uživatel, a to buď v jejich původní formě nebo po začlenění do jiných položek, aniž by nejprve získali souhlas od vlády USA nebo byly jinak povoleny."
This item is controlled by the U.S. government and authorized for export only to the country of ultimate destination for use by the ultimate consignee or end-user(s) herein identified. It may not be resold, transferred, or otherwise disposed of, to any other country or to any person other than the authorized ultimate consignee or end-user(s), either in their original form or after being incorporated into other items, without first obtaining approval from the U.S. government or as otherwise authorized by U.S. law and regulations.
Odpovědný hospodářský subjekt podle nařízení EU
Brownells Arms s.r.o.
Bílanská 1861/81
76701 Kroměříž
Česká republika
info@brownells.cz
Zlepšete svůj Glock s konektorem GHOST 3.5! 🎯 Nabízí lehčí a hladší chod spouště, snadná instalace a doživotní záruka spokojenosti.
Ghost trigger connectors for Glock® pistols replace the original, factory trigger connectors to give you a lighter, smoother trigger pull in one easy to install part. Factory polished for the smoothest operation, all Ghost connectors come with a 100% lifetime satisfaction guarantee. The Ghost 3.5 is a drop-in, 3.5lbs connector that is lighter and smoother than the original Ghost connector.
SPECS: Will fit Gen 1-4 all models except Glock models 42 or 43.
Další...
Zlehčuje & Zlepšuje Pocit ze Spouště
Konektory spouště Ghost pro pistole Glock® nahrazují originální tovární konektory a poskytují vám lehčí a hladší chod spouště v jednodílném snadno instalovatelném díle. Továrně leštěné pro nejhladší operaci, všechny konektory Ghost jsou dodávány se 100% zárukou doživotní spokojenosti. Ghost 3.5 je konektor s odpadem 3,5lb, který je lehčí a hladší než originální konektor Ghost.
SPECS: Vhodné pro modely Gen 1-4, kromě modelů Glock 42 nebo 43.
Další...
Hodnocení zákazníků pro položku GHOST 3.5 TRIGGER CONNECTOR
Počet hodnocení: 15
Od brownells.com: 15
Průměrné hodnocení: 4
Makes for a GREAT SMOOTH trigger job.(15.10.2009)
When this connector is used and installed properly with the 4 lb. striker spring and a little buffing, you can get an awesome trigger job. I've used many of these and NEVER had a complaint.
Easy Upgrade(12.5.2010)
Easy upgrade to a better trigger.
great product(12.9.2010)
I install this connector in my wifes G-19. Works great, she and my daughter improves the scores, and feel more confident with the gun.-
feels lighter just dry firing(7.10.2010)
you can feel a diffrence even dry firing it compared to the stock one.
Great trigger pull(22.3.2011)
Love the Glock, not thrilled with the trigger. Dropped in a Ghost 3.5 trigger connector with a Wolf light weight striker spring. Wow, sweet trigger now.
$ 12.99 wasted(24.7.2011)
My Glock 19 went full auto with this disconnector in place. Needless to say, I switched back to the factory disconnector at once.
Ghost 3.5 trigger connector(10.8.2012)
Bought the Ghost 3.5 trigger connector. Easy install. Also replaced striker spring with wolf lighter spring. These two work together great. Trigger is just where I want it. Great products.
You get what you pay for(16.8.2013)
It does slightly help, but in my opinion does more bad than good. Edges are sharp and cheaply made. No QA inspection were done in my opinion. Would recommend using only in emergency.
WASTE OF MONEY(14.10.2014)
VERY DISAPPOINTED. AM RETURNING THE ONES I BOUGHT.
EXPECTED A QUALITY PRODUCT. ONLY REDUCED THE STOCK 5.5 LB TRIGGER TO 5 LBS. HAD BEEN USING A
DIFFERENT BRAND WITH EXCELLENT 3.5 LB RESULTS BUT DECIDED TO TRY THE GHOST. REGRET THAT NOW.
Know What You Are Doing(25.4.2015)
I have installed this connector and springs in several Glock pistols of different calibers. Two were competition guns for an LEO and his wife. When installing I carefully polished EVERY SINGLE piece of steel in the trigger/safety system. When the parts look like chrome they are polished enough. The reason is that burnt power residue will not stick to them as easily when they are smooth and shiny. They also interact much more smoothly and give consistent results. All of my Glock pistols have the Ghost triggers/connector and are totally polished (every single piece). Works like a charm! Try it you will like it.
Reduced my group at 7 yds from 8" to 3"(16.1.2017)
Glock Perfection my arse... this trigger was a very easy installation. Watching youtube videos made it a straightforward trigger job. Only took 2 minutes to do. But it made the trigger better, crisp, linear, with no more "walls" to overcome. With my current CCW, I'm used to shooting 2" groups at 7 yds (small target using same ammo as with G30S for control). Couldn't shoot the G30S worth a darn. "It'll take time" they said, "to get used to the glock trigger." How much time and and how many $$$ in ammo? With this trigger job, it only took $12 and 2 minutes later, I now can start considering the G30S as a CCW. Not quite there yet but finally headed the right direction. Not giving full 5 stars b/c mine registers 4.5# instead of the advertised 3.5# (yeah I already checked I did get the 3.5# one)
I got it because I was excited about a better trigger, well I got it and installed it, and there was zero difference in my trigger. $12 wasted because I could have just left the factory one in place it would work just the same
Liked it.(11.10.2017)
Better, lighter trigger pull.
Not 3.5 More what I really wanted(9.1.2018)
Got this in hopes to improve the trigger in a Polymer 80 build. I originally installed all Glock OEM parts in the frame and slide. At first check the trigger was at 8#+ using a spring gauge, probably not the most accurate but it is a base line. After installing the Ghost 3.5 Trigger Connector and polishing all the contact edges of the Glock OEM parts with 600 grit cloth the trigger pull tested at 4 to 4.5#. Just right, even though it didn't make the 3.5# it's really the trigger that I wanted.
Works as advertised. Great price.(30.8.2018)
I got this for my glock 23 generation 3. It drops right in and fits like the factory as advertised with no adjustment needed. It is rather very light and I can't give you an exact poundage on the trigger pull, but I personally wouldn't use this on a carry weapon and I understand that some people would prefer to do it. My reason is for safety because the stoppage where you pull the trigger and take off all the slack and hit the wall where you know it's going to activate the firing pin next is non-existent. Okay, maybe non-existent is exaggerating it, but if you trained yourself to feel that wall, then you may accidentally fire a round and spook yourself as I did when trying to get familiarized with the new trigger connector. The wall is very light and short when compared to the OEM trigger connector. It is for this reason I would opt to not use this on a carry weapon. I want to minimize the accidental discharge of a firearm in a scenario where I draw or take out my weapon and the trigger barely nicks or gets caught on something and it goes off because the trigger was so light. This trigger connector does however make a fun range toy and improves accuracy somewhat for rookie shooters because it minimizes the application of uneven force applied to the trigger too far to the right or left by taking away that wall. Im very satisfied with this trigger connector and will not have to ruin the trigger pull poundage on my stock OEM trigger connector by doing a .25 cent polish job.
Help a kontakt
(0) 
Novinky
Klasické zobrazení
Mobilní zobrazení