Přes 300 000 zákazníků - děkujeme vám!

40 000+ produktů pro lov a střelbu

EU2013033
4799 10999 68 CZK
Produkt č.: EU2013033
Full Length Die 300 Wea Mag
Číslo výrobce: 3292811 The FL dies is used to size the cartridge case on full length. In addition to a removable expander our FL dies have an integrated primer ejector pin. All used spindles, the expander and ejector pin can be replaced easily if necessary, with just little effort. Calibration takes place when the cartridge case is pushed into the die. The neck of the case is calibrated from the inside when it is moved out of the die. This will form the cartridge case and achieves a correct neck tension. The correct position of the die in the press is set with the lock nut. All relevant components have an article number for easy reordering if necessary. You will find further instructions and assistance in selecting accessories and spare parts in the manual.
5999 CZK 0 5 999,00 Kč *
Bude pořízeno od dodavatele po vaší objednávce
Doba dodání cca 14-30 týdnů.
Vlastnosti: Thread: 1 1/4

Původní popis

The FL dies is used to size the cartridge case on full length. In addition to a removable expander our FL dies have an integrated primer ejector pin. All used spindles, the expander and ejector pin can be replaced easily if necessary, with just little effort.

Calibration takes place when the cartridge case is pushed into the die. The neck of the case is calibrated from the inside when it is moved out of the die. This will form the cartridge case and achieves a correct neck tension.

The correct position of the die in the press is set with the lock nut. All relevant components have an article number for easy reordering if necessary. You will find further instructions and assistance in selecting accessories and spare parts in the manual.

Atributy

Závit: 1 1/4 Dodací hmotnost: 0,65kg Výška přepravy: 55mm Šířka přepravy: 55mm Délka přepravy: 130mm

Automatický překlad popisu

The FL dies is used to size the cartridge case on full length. In addition to a removable expander our FL dies have an integrated primer ejector pin. All used spindles, the expander and ejector pin can be replaced easily if necessary, with just little effort.

Calibration takes place when the cartridge case is pushed into the die. The neck of the case is calibrated from the inside when it is moved out of the die. This will form the cartridge case and achieves a correct neck tension.

The correct position of the die in the press is set with the lock nut. All relevant components have an article number for easy reordering if necessary. You will find further instructions and assistance in selecting accessories and spare parts in the manual.



Produkt č.: EU2012994
Full Length Die 5,6x57
Číslo výrobce: 3026011 The FL dies is used to size the cartridge case on full length. In addition to a removable expander our FL dies have an integrated primer ejector pin. All used spindles, the expander and ejector pin can be replaced easily if necessary, with just little effort. Calibration takes place when the cartridge case is pushed into the die. The neck of the case is calibrated from the inside when it is moved out of the die. This will form the cartridge case and achieves a correct neck tension. The correct position of the die in the press is set with the lock nut. All relevant components have an article number for easy reordering if necessary. You will find further instructions and assistance in selecting accessories and spare parts in the manual.
5999 CZK 0 5 999,00 Kč *
Bude pořízeno od dodavatele po vaší objednávce
Doba dodání cca 14-30 týdnů.
Vlastnosti: Thread: 1 1/4
Produkt č.: EU2012995
Full Length Die 5,6x61 S.E.v.H.
Číslo výrobce: 3026811 The FL dies is used to size the cartridge case on full length. In addition to a removable expander our FL dies have an integrated primer ejector pin. All used spindles, the expander and ejector pin can be replaced easily if necessary, with just little effort. Calibration takes place when the cartridge case is pushed into the die. The neck of the case is calibrated from the inside when it is moved out of the die. This will form the cartridge case and achieves a correct neck tension. The correct position of the die in the press is set with the lock nut. All relevant components have an article number for easy reordering if necessary. You will find further instructions and assistance in selecting accessories and spare parts in the manual.
7199 CZK 0 7 199,00 Kč *
Bude pořízeno od dodavatele po vaší objednávce
Doba dodání cca 14-30 týdnů.
Vlastnosti: Thread: 1 1/4
Produkt č.: EU2012996
Full Length Die 224 Wea Mag
Číslo výrobce: 3070811 The FL dies is used to size the cartridge case on full length. In addition to a removable expander our FL dies have an integrated primer ejector pin. All used spindles, the expander and ejector pin can be replaced easily if necessary, with just little effort. Calibration takes place when the cartridge case is pushed into the die. The neck of the case is calibrated from the inside when it is moved out of the die. This will form the cartridge case and achieves a correct neck tension. The correct position of the die in the press is set with the lock nut. All relevant components have an article number for easy reordering if necessary. You will find further instructions and assistance in selecting accessories and spare parts in the manual.
4799 CZK 0 4 799,00 Kč *
Bude pořízeno od dodavatele po vaší objednávce
Doba dodání cca 14-30 týdnů.
Vlastnosti: Thread: 1 1/4
Produkt č.: EU2012997
Full Length Die 6x62 Frères
Číslo výrobce: 3085611 The FL dies is used to size the cartridge case on full length. In addition to a removable expander our FL dies have an integrated primer ejector pin. All used spindles, the expander and ejector pin can be replaced easily if necessary, with just little effort. Calibration takes place when the cartridge case is pushed into the die. The neck of the case is calibrated from the inside when it is moved out of the die. This will form the cartridge case and achieves a correct neck tension. The correct position of the die in the press is set with the lock nut. All relevant components have an article number for easy reordering if necessary. You will find further instructions and assistance in selecting accessories and spare parts in the manual.
4799 CZK 0 4 799,00 Kč *
Bude pořízeno od dodavatele po vaší objednávce
Doba dodání cca 14-30 týdnů.
Vlastnosti: Thread: 1 1/4
Produkt č.: EU2012998
Full Length Die 6x70 R
Číslo výrobce: 3086811 The FL dies is used to size the cartridge case on full length. In addition to a removable expander our FL dies have an integrated primer ejector pin. All used spindles, the expander and ejector pin can be replaced easily if necessary, with just little effort. Calibration takes place when the cartridge case is pushed into the die. The neck of the case is calibrated from the inside when it is moved out of the die. This will form the cartridge case and achieves a correct neck tension. The correct position of the die in the press is set with the lock nut. All relevant components have an article number for easy reordering if necessary. You will find further instructions and assistance in selecting accessories and spare parts in the manual.
5999 CZK 0 5 999,00 Kč *
Bude pořízeno od dodavatele po vaší objednávce
Doba dodání cca 14-30 týdnů.
Vlastnosti: Thread: 1 1/4
Produkt č.: EU2012999
Full Length Die 6mm BR Rem
Číslo výrobce: 3088011 The FL dies is used to size the cartridge case on full length. In addition to a removable expander our FL dies have an integrated primer ejector pin. All used spindles, the expander and ejector pin can be replaced easily if necessary, with just little effort. Calibration takes place when the cartridge case is pushed into the die. The neck of the case is calibrated from the inside when it is moved out of the die. This will form the cartridge case and achieves a correct neck tension. The correct position of the die in the press is set with the lock nut. All relevant components have an article number for easy reordering if necessary. You will find further instructions and assistance in selecting accessories and spare parts in the manual.
5999 CZK 0 5 999,00 Kč *
Bude pořízeno od dodavatele po vaší objednávce
Doba dodání cca 14-30 týdnů.
Vlastnosti: Thread: 1 1/4
Produkt č.: EU2013000
Full Length Die 6mm Dasher
Číslo výrobce: 3088311 The FL dies is used to size the cartridge case on full length. In addition to a removable expander our FL dies have an integrated primer ejector pin. All used spindles, the expander and ejector pin can be replaced easily if necessary, with just little effort. Calibration takes place when the cartridge case is pushed into the die. The neck of the case is calibrated from the inside when it is moved out of the die. This will form the cartridge case and achieves a correct neck tension. The correct position of the die in the press is set with the lock nut. All relevant components have an article number for easy reordering if necessary. You will find further instructions and assistance in selecting accessories and spare parts in the manual.
5999 CZK 0 5 999,00 Kč *
Bude pořízeno od dodavatele po vaší objednávce
Doba dodání cca 14-30 týdnů.
Vlastnosti: Thread: 1 1/4
Produkt č.: EU2013001
Full Length Die 6mm PPC-USA
Číslo výrobce: 3096411 The FL dies is used to size the cartridge case on full length. In addition to a removable expander our FL dies have an integrated primer ejector pin. All used spindles, the expander and ejector pin can be replaced easily if necessary, with just little effort. Calibration takes place when the cartridge case is pushed into the die. The neck of the case is calibrated from the inside when it is moved out of the die. This will form the cartridge case and achieves a correct neck tension. The correct position of the die in the press is set with the lock nut. All relevant components have an article number for easy reordering if necessary. You will find further instructions and assistance in selecting accessories and spare parts in the manual.
5999 CZK 0 5 999,00 Kč *
Bude pořízeno od dodavatele po vaší objednávce
Doba dodání cca 14-30 týdnů.
Vlastnosti: Thread: 1 1/4
Produkt č.: EU2013002
Full Length Die 257 Wea Mag
Číslo výrobce: 3143611 The FL dies is used to size the cartridge case on full length. In addition to a removable expander our FL dies have an integrated primer ejector pin. All used spindles, the expander and ejector pin can be replaced easily if necessary, with just little effort. Calibration takes place when the cartridge case is pushed into the die. The neck of the case is calibrated from the inside when it is moved out of the die. This will form the cartridge case and achieves a correct neck tension. The correct position of the die in the press is set with the lock nut. All relevant components have an article number for easy reordering if necessary. You will find further instructions and assistance in selecting accessories and spare parts in the manual.
5999 CZK 0 5 999,00 Kč *
Bude pořízeno od dodavatele po vaší objednávce
Doba dodání cca 14-30 týdnů.
Vlastnosti: Thread: 1 1/4
Produkt č.: EU2013003
Full Length Die 6,5x50 R Reb
Číslo výrobce: 3148411 The FL dies is used to size the cartridge case on full length. In addition to a removable expander our FL dies have an integrated primer ejector pin. All used spindles, the expander and ejector pin can be replaced easily if necessary, with just little effort. Calibration takes place when the cartridge case is pushed into the die. The neck of the case is calibrated from the inside when it is moved out of the die. This will form the cartridge case and achieves a correct neck tension. The correct position of the die in the press is set with the lock nut. All relevant components have an article number for easy reordering if necessary. You will find further instructions and assistance in selecting accessories and spare parts in the manual.
4799 CZK 0 4 799,00 Kč *
Bude pořízeno od dodavatele po vaší objednávce
Doba dodání cca 14-30 týdnů.
Vlastnosti: Thread: 1 1/4
Produkt č.: EU2013004
Full Length Die 6,5x52 R
Číslo výrobce: 3150011 The FL dies is used to size the cartridge case on full length. In addition to a removable expander our FL dies have an integrated primer ejector pin. All used spindles, the expander and ejector pin can be replaced easily if necessary, with just little effort. Calibration takes place when the cartridge case is pushed into the die. The neck of the case is calibrated from the inside when it is moved out of the die. This will form the cartridge case and achieves a correct neck tension. The correct position of the die in the press is set with the lock nut. All relevant components have an article number for easy reordering if necessary. You will find further instructions and assistance in selecting accessories and spare parts in the manual.
5999 CZK 0 5 999,00 Kč *
Bude pořízeno od dodavatele po vaší objednávce
Doba dodání cca 14-30 týdnů.
Vlastnosti: Thread: 1 1/4
Produkt č.: EU2013005
Full Length Die 6,5x54 M-Sch
Číslo výrobce: 3152811 The FL dies is used to size the cartridge case on full length. In addition to a removable expander our FL dies have an integrated primer ejector pin. All used spindles, the expander and ejector pin can be replaced easily if necessary, with just little effort. Calibration takes place when the cartridge case is pushed into the die. The neck of the case is calibrated from the inside when it is moved out of the die. This will form the cartridge case and achieves a correct neck tension. The correct position of the die in the press is set with the lock nut. All relevant components have an article number for easy reordering if necessary. You will find further instructions and assistance in selecting accessories and spare parts in the manual.
5999 CZK 0 5 999,00 Kč *
Bude pořízeno od dodavatele po vaší objednávce
Doba dodání cca 14-30 týdnů.
Vlastnosti: Thread: 1 1/4
Produkt č.: EU2013006
Full Length Die 6,5x54 Mauser
Číslo výrobce: 3153211 The FL dies is used to size the cartridge case on full length. In addition to a removable expander our FL dies have an integrated primer ejector pin. All used spindles, the expander and ejector pin can be replaced easily if necessary, with just little effort. Calibration takes place when the cartridge case is pushed into the die. The neck of the case is calibrated from the inside when it is moved out of the die. This will form the cartridge case and achieves a correct neck tension. The correct position of the die in the press is set with the lock nut. All relevant components have an article number for easy reordering if necessary. You will find further instructions and assistance in selecting accessories and spare parts in the manual.
5999 CZK 0 5 999,00 Kč *
Bude pořízeno od dodavatele po vaší objednávce
Doba dodání cca 14-30 týdnů.
Vlastnosti: Thread: 1 1/4
Produkt č.: EU2013007
Full Length Die 6,5x57
Číslo výrobce: 3154011 The FL dies is used to size the cartridge case on full length. In addition to a removable expander our FL dies have an integrated primer ejector pin. All used spindles, the expander and ejector pin can be replaced easily if necessary, with just little effort. Calibration takes place when the cartridge case is pushed into the die. The neck of the case is calibrated from the inside when it is moved out of the die. This will form the cartridge case and achieves a correct neck tension. The correct position of the die in the press is set with the lock nut. All relevant components have an article number for easy reordering if necessary. You will find further instructions and assistance in selecting accessories and spare parts in the manual.
4799 CZK 0 4 799,00 Kč *
Bude pořízeno od dodavatele po vaší objednávce
Doba dodání cca 14-30 týdnů.
Vlastnosti: Thread: 1 1/4
Produkt č.: EU2013008
Full Length Die 6,5x64
Číslo výrobce: 3157211 The FL dies is used to size the cartridge case on full length. In addition to a removable expander our FL dies have an integrated primer ejector pin. All used spindles, the expander and ejector pin can be replaced easily if necessary, with just little effort. Calibration takes place when the cartridge case is pushed into the die. The neck of the case is calibrated from the inside when it is moved out of the die. This will form the cartridge case and achieves a correct neck tension. The correct position of the die in the press is set with the lock nut. All relevant components have an article number for easy reordering if necessary. You will find further instructions and assistance in selecting accessories and spare parts in the manual.
4799 CZK 0 4 799,00 Kč *
Bude pořízeno od dodavatele po vaší objednávce
Doba dodání cca 14-30 týdnů.
Vlastnosti: Thread: 1 1/4
Produkt č.: EU2013009
Full Length Die 6,5x64 Brenneke
Číslo výrobce: 3157611 The FL dies is used to size the cartridge case on full length. In addition to a removable expander our FL dies have an integrated primer ejector pin. All used spindles, the expander and ejector pin can be replaced easily if necessary, with just little effort. Calibration takes place when the cartridge case is pushed into the die. The neck of the case is calibrated from the inside when it is moved out of the die. This will form the cartridge case and achieves a correct neck tension. The correct position of the die in the press is set with the lock nut. All relevant components have an article number for easy reordering if necessary. You will find further instructions and assistance in selecting accessories and spare parts in the manual.
4799 CZK 0 4 799,00 Kč *
Bude pořízeno od dodavatele po vaší objednávce
Doba dodání cca 14-30 týdnů.
Vlastnosti: Thread: 1 1/4
Produkt č.: EU2013010
Full Length Die 6,5x65 RWS
Číslo výrobce: 3158411 The FL dies is used to size the cartridge case on full length. In addition to a removable expander our FL dies have an integrated primer ejector pin. All used spindles, the expander and ejector pin can be replaced easily if necessary, with just little effort. Calibration takes place when the cartridge case is pushed into the die. The neck of the case is calibrated from the inside when it is moved out of the die. This will form the cartridge case and achieves a correct neck tension. The correct position of the die in the press is set with the lock nut. All relevant components have an article number for easy reordering if necessary. You will find further instructions and assistance in selecting accessories and spare parts in the manual.
4799 CZK 0 4 799,00 Kč *
Bude pořízeno od dodavatele po vaší objednávce
Doba dodání cca 14-30 týdnů.
Vlastnosti: Thread: 1 1/4
Produkt č.: EU2013011
Full Length Die 6,5x68
Číslo výrobce: 3159611 The FL dies is used to size the cartridge case on full length. In addition to a removable expander our FL dies have an integrated primer ejector pin. All used spindles, the expander and ejector pin can be replaced easily if necessary, with just little effort. Calibration takes place when the cartridge case is pushed into the die. The neck of the case is calibrated from the inside when it is moved out of the die. This will form the cartridge case and achieves a correct neck tension. The correct position of the die in the press is set with the lock nut. All relevant components have an article number for easy reordering if necessary. You will find further instructions and assistance in selecting accessories and spare parts in the manual.
4799 CZK 0 4 799,00 Kč *
Bude pořízeno od dodavatele po vaší objednávce
Doba dodání cca 14-30 týdnů.
Vlastnosti: Thread: 1 1/4
Produkt č.: EU2013012
Full Length Die 6,5x68 R
Číslo výrobce: 3160411 The FL dies is used to size the cartridge case on full length. In addition to a removable expander our FL dies have an integrated primer ejector pin. All used spindles, the expander and ejector pin can be replaced easily if necessary, with just little effort. Calibration takes place when the cartridge case is pushed into the die. The neck of the case is calibrated from the inside when it is moved out of the die. This will form the cartridge case and achieves a correct neck tension. The correct position of the die in the press is set with the lock nut. All relevant components have an article number for easy reordering if necessary. You will find further instructions and assistance in selecting accessories and spare parts in the manual.
5999 CZK 0 5 999,00 Kč *
Bude pořízeno od dodavatele po vaší objednávce
Doba dodání cca 14-30 týdnů.
Vlastnosti: Thread: 1 1/4
Produkt č.: EU2013013
Full Length Die 6,5 PRC
Číslo výrobce: 3167011 The FL dies is used to size the cartridge case on full length. In addition to a removable expander our FL dies have an integrated primer ejector pin. All used spindles, the expander and ejector pin can be replaced easily if necessary, with just little effort. Calibration takes place when the cartridge case is pushed into the die. The neck of the case is calibrated from the inside when it is moved out of the die. This will form the cartridge case and achieves a correct neck tension. The correct position of the die in the press is set with the lock nut. All relevant components have an article number for easy reordering if necessary. You will find further instructions and assistance in selecting accessories and spare parts in the manual.
5999 CZK 0 5 999,00 Kč *
Bude pořízeno od dodavatele po vaší objednávce
Doba dodání cca 14-30 týdnů.
Vlastnosti: Thread: 1 1/4
Produkt č.: EU2013014
Full Length Die 6,5-284 Norma
Číslo výrobce: 3172811 The FL dies is used to size the cartridge case on full length. In addition to a removable expander our FL dies have an integrated primer ejector pin. All used spindles, the expander and ejector pin can be replaced easily if necessary, with just little effort. Calibration takes place when the cartridge case is pushed into the die. The neck of the case is calibrated from the inside when it is moved out of the die. This will form the cartridge case and achieves a correct neck tension. The correct position of the die in the press is set with the lock nut. All relevant components have an article number for easy reordering if necessary. You will find further instructions and assistance in selecting accessories and spare parts in the manual.
5999 CZK 0 5 999,00 Kč *
Bude pořízeno od dodavatele po vaší objednávce
Doba dodání cca 14-30 týdnů.
Vlastnosti: Thread: 1 1/4
Produkt č.: EU2013015
Full Length Die 7x57
Číslo výrobce: 3193611 The FL dies is used to size the cartridge case on full length. In addition to a removable expander our FL dies have an integrated primer ejector pin. All used spindles, the expander and ejector pin can be replaced easily if necessary, with just little effort. Calibration takes place when the cartridge case is pushed into the die. The neck of the case is calibrated from the inside when it is moved out of the die. This will form the cartridge case and achieves a correct neck tension. The correct position of the die in the press is set with the lock nut. All relevant components have an article number for easy reordering if necessary. You will find further instructions and assistance in selecting accessories and spare parts in the manual.
4799 CZK 0 4 799,00 Kč *
Bude pořízeno od dodavatele po vaší objednávce
Doba dodání cca 14-30 týdnů.
Vlastnosti: Thread: 1 1/4
Produkt č.: EU2013016
Full Length Die 7x64
Číslo výrobce: 3196411 The FL dies is used to size the cartridge case on full length. In addition to a removable expander our FL dies have an integrated primer ejector pin. All used spindles, the expander and ejector pin can be replaced easily if necessary, with just little effort. Calibration takes place when the cartridge case is pushed into the die. The neck of the case is calibrated from the inside when it is moved out of the die. This will form the cartridge case and achieves a correct neck tension. The correct position of the die in the press is set with the lock nut. All relevant components have an article number for easy reordering if necessary. You will find further instructions and assistance in selecting accessories and spare parts in the manual.
5999 CZK 0 5 999,00 Kč *
Bude pořízeno od dodavatele po vaší objednávce
Doba dodání cca 14-30 týdnů.
Vlastnosti: Thread: 1 1/4
Produkt č.: EU2013017
Full Length Die 7mm SE v.H.
Číslo výrobce: 3197211 The FL dies is used to size the cartridge case on full length. In addition to a removable expander our FL dies have an integrated primer ejector pin. All used spindles, the expander and ejector pin can be replaced easily if necessary, with just little effort. Calibration takes place when the cartridge case is pushed into the die. The neck of the case is calibrated from the inside when it is moved out of the die. This will form the cartridge case and achieves a correct neck tension. The correct position of the die in the press is set with the lock nut. All relevant components have an article number for easy reordering if necessary. You will find further instructions and assistance in selecting accessories and spare parts in the manual.
7199 CZK 0 7 199,00 Kč *
Bude pořízeno od dodavatele po vaší objednávce
Doba dodání cca 14-30 týdnů.
Vlastnosti: Thread: 1 1/4
Produkt č.: EU2013018
Full Length Die 7mm Blaser Mag
Číslo výrobce: 3199811 The FL dies is used to size the cartridge case on full length. In addition to a removable expander our FL dies have an integrated primer ejector pin. All used spindles, the expander and ejector pin can be replaced easily if necessary, with just little effort. Calibration takes place when the cartridge case is pushed into the die. The neck of the case is calibrated from the inside when it is moved out of the die. This will form the cartridge case and achieves a correct neck tension. The correct position of the die in the press is set with the lock nut. All relevant components have an article number for easy reordering if necessary. You will find further instructions and assistance in selecting accessories and spare parts in the manual.
7199 CZK 0 7 199,00 Kč *
Bude pořízeno od dodavatele po vaší objednávce
Doba dodání cca 14-30 týdnů.
Vlastnosti: Thread: 1 1/4
Produkt č.: EU2013019
Full Length Die 7mm PRC
Číslo výrobce: 3209011 The FL dies is used to size the cartridge case on full length. In addition to a removable expander our FL dies have an integrated primer ejector pin. All used spindles, the expander and ejector pin can be replaced easily if necessary, with just little effort. Calibration takes place when the cartridge case is pushed into the die. The neck of the case is calibrated from the inside when it is moved out of the die. This will form the cartridge case and achieves a correct neck tension. The correct position of the die in the press is set with the lock nut. All relevant components have an article number for easy reordering if necessary. You will find further instructions and assistance in selecting accessories and spare parts in the manual.
5999 CZK 0 5 999,00 Kč *
Bude pořízeno od dodavatele po vaší objednávce
Doba dodání cca 14-30 týdnů.
Vlastnosti: Thread: 1 1/4
Produkt č.: EU2013020
Full Length Die 7mm Rem Mag
Číslo výrobce: 3209211 The FL dies is used to size the cartridge case on full length. In addition to a removable expander our FL dies have an integrated primer ejector pin. All used spindles, the expander and ejector pin can be replaced easily if necessary, with just little effort. Calibration takes place when the cartridge case is pushed into the die. The neck of the case is calibrated from the inside when it is moved out of the die. This will form the cartridge case and achieves a correct neck tension. The correct position of the die in the press is set with the lock nut. All relevant components have an article number for easy reordering if necessary. You will find further instructions and assistance in selecting accessories and spare parts in the manual.
5999 CZK 0 5 999,00 Kč *
Bude pořízeno od dodavatele po vaší objednávce
Doba dodání cca 14-30 týdnů.
Vlastnosti: Thread: 1 1/4
Produkt č.: EU2013021
Full Length Die 7mm Rem SAUM
Číslo výrobce: 3209311 The FL dies is used to size the cartridge case on full length. In addition to a removable expander our FL dies have an integrated primer ejector pin. All used spindles, the expander and ejector pin can be replaced easily if necessary, with just little effort. Calibration takes place when the cartridge case is pushed into the die. The neck of the case is calibrated from the inside when it is moved out of the die. This will form the cartridge case and achieves a correct neck tension. The correct position of the die in the press is set with the lock nut. All relevant components have an article number for easy reordering if necessary. You will find further instructions and assistance in selecting accessories and spare parts in the manual.
8199 CZK 0 8 199,00 Kč *
Bude pořízeno od dodavatele po vaší objednávce
Doba dodání cca 14-30 týdnů.
Vlastnosti: Thread: 1 1/4
Produkt č.: EU2013022
Full Length Die 7mm WSM
Číslo výrobce: 3212611 The FL dies is used to size the cartridge case on full length. In addition to a removable expander our FL dies have an integrated primer ejector pin. All used spindles, the expander and ejector pin can be replaced easily if necessary, with just little effort. Calibration takes place when the cartridge case is pushed into the die. The neck of the case is calibrated from the inside when it is moved out of the die. This will form the cartridge case and achieves a correct neck tension. The correct position of the die in the press is set with the lock nut. All relevant components have an article number for easy reordering if necessary. You will find further instructions and assistance in selecting accessories and spare parts in the manual.
7199 CZK 0 7 199,00 Kč *
Bude pořízeno od dodavatele po vaší objednávce
Doba dodání cca 14-30 týdnů.
Vlastnosti: Thread: 1 1/4
Produkt č.: EU2013023
Full Length Die 7mm STW
Číslo výrobce: 3213611 The FL dies is used to size the cartridge case on full length. In addition to a removable expander our FL dies have an integrated primer ejector pin. All used spindles, the expander and ejector pin can be replaced easily if necessary, with just little effort. Calibration takes place when the cartridge case is pushed into the die. The neck of the case is calibrated from the inside when it is moved out of the die. This will form the cartridge case and achieves a correct neck tension. The correct position of the die in the press is set with the lock nut. All relevant components have an article number for easy reordering if necessary. You will find further instructions and assistance in selecting accessories and spare parts in the manual.
8199 CZK 0 8 199,00 Kč *
Bude pořízeno od dodavatele po vaší objednávce
Doba dodání cca 14-30 týdnů.
Vlastnosti: Thread: 1 1/4
Produkt č.: EU2013024
Full Length Die 7mm Wea Mag
Číslo výrobce: 3216011 The FL dies is used to size the cartridge case on full length. In addition to a removable expander our FL dies have an integrated primer ejector pin. All used spindles, the expander and ejector pin can be replaced easily if necessary, with just little effort. Calibration takes place when the cartridge case is pushed into the die. The neck of the case is calibrated from the inside when it is moved out of the die. This will form the cartridge case and achieves a correct neck tension. The correct position of the die in the press is set with the lock nut. All relevant components have an article number for easy reordering if necessary. You will find further instructions and assistance in selecting accessories and spare parts in the manual.
7199 CZK 0 7 199,00 Kč *
Bude pořízeno od dodavatele po vaší objednávce
Doba dodání cca 14-30 týdnů.
Vlastnosti: Thread: 1 1/4
Produkt č.: EU2013025
Full Length Die 7mm-08 Rem
Číslo výrobce: 3218411 The FL dies is used to size the cartridge case on full length. In addition to a removable expander our FL dies have an integrated primer ejector pin. All used spindles, the expander and ejector pin can be replaced easily if necessary, with just little effort. Calibration takes place when the cartridge case is pushed into the die. The neck of the case is calibrated from the inside when it is moved out of the die. This will form the cartridge case and achieves a correct neck tension. The correct position of the die in the press is set with the lock nut. All relevant components have an article number for easy reordering if necessary. You will find further instructions and assistance in selecting accessories and spare parts in the manual.
4799 CZK 0 4 799,00 Kč *
Bude pořízeno od dodavatele po vaší objednávce
Doba dodání cca 14-30 týdnů.
Vlastnosti: Thread: 1 1/4
Produkt č.: EU2013026
Full Length Die 270 Wea Mag
Číslo výrobce: 3225211 The FL dies is used to size the cartridge case on full length. In addition to a removable expander our FL dies have an integrated primer ejector pin. All used spindles, the expander and ejector pin can be replaced easily if necessary, with just little effort. Calibration takes place when the cartridge case is pushed into the die. The neck of the case is calibrated from the inside when it is moved out of the die. This will form the cartridge case and achieves a correct neck tension. The correct position of the die in the press is set with the lock nut. All relevant components have an article number for easy reordering if necessary. You will find further instructions and assistance in selecting accessories and spare parts in the manual.
5999 CZK 0 5 999,00 Kč *
Bude pořízeno od dodavatele po vaší objednávce
Doba dodání cca 14-30 týdnů.
Vlastnosti: Thread: 1 1/4
Produkt č.: EU2013027
Full Length Die 270 WSM
Číslo výrobce: 3226211 The FL dies is used to size the cartridge case on full length. In addition to a removable expander our FL dies have an integrated primer ejector pin. All used spindles, the expander and ejector pin can be replaced easily if necessary, with just little effort. Calibration takes place when the cartridge case is pushed into the die. The neck of the case is calibrated from the inside when it is moved out of the die. This will form the cartridge case and achieves a correct neck tension. The correct position of the die in the press is set with the lock nut. All relevant components have an article number for easy reordering if necessary. You will find further instructions and assistance in selecting accessories and spare parts in the manual.
7199 CZK 0 7 199,00 Kč *
Bude pořízeno od dodavatele po vaší objednávce
Doba dodání cca 14-30 týdnů.
Vlastnosti: Thread: 1 1/4
Produkt č.: EU2013028
Full Length Die 284 Win
Číslo výrobce: 3239211 The FL dies is used to size the cartridge case on full length. In addition to a removable expander our FL dies have an integrated primer ejector pin. All used spindles, the expander and ejector pin can be replaced easily if necessary, with just little effort. Calibration takes place when the cartridge case is pushed into the die. The neck of the case is calibrated from the inside when it is moved out of the die. This will form the cartridge case and achieves a correct neck tension. The correct position of the die in the press is set with the lock nut. All relevant components have an article number for easy reordering if necessary. You will find further instructions and assistance in selecting accessories and spare parts in the manual.
5999 CZK 0 5 999,00 Kč *
Bude pořízeno od dodavatele po vaší objednávce
Doba dodání cca 14-30 týdnů.
Vlastnosti: Thread: 1 1/4
Produkt č.: EU2013029
Full Length Die 7,62x39
Číslo výrobce: 3248411 The FL dies is used to size the cartridge case on full length. In addition to a removable expander our FL dies have an integrated primer ejector pin. All used spindles, the expander and ejector pin can be replaced easily if necessary, with just little effort. Calibration takes place when the cartridge case is pushed into the die. The neck of the case is calibrated from the inside when it is moved out of the die. This will form the cartridge case and achieves a correct neck tension. The correct position of the die in the press is set with the lock nut. All relevant components have an article number for easy reordering if necessary. You will find further instructions and assistance in selecting accessories and spare parts in the manual.
7199 CZK 0 7 199,00 Kč *
Bude pořízeno od dodavatele po vaší objednávce
Doba dodání cca 14-30 týdnů.
Vlastnosti: Thread: 1 1/4
Produkt č.: EU2013030
Full Length Die 300 Pegasus
Číslo výrobce: 3289411 The FL dies is used to size the cartridge case on full length. In addition to a removable expander our FL dies have an integrated primer ejector pin. All used spindles, the expander and ejector pin can be replaced easily if necessary, with just little effort. Calibration takes place when the cartridge case is pushed into the die. The neck of the case is calibrated from the inside when it is moved out of the die. This will form the cartridge case and achieves a correct neck tension. The correct position of the die in the press is set with the lock nut. All relevant components have an article number for easy reordering if necessary. You will find further instructions and assistance in selecting accessories and spare parts in the manual.
7199 CZK 0 7 199,00 Kč *
Bude pořízeno od dodavatele po vaší objednávce
Doba dodání cca 14-30 týdnů.
Vlastnosti: Thread: 1 1/4
Produkt č.: EU2013031
Full Length Die 300 PRC
Číslo výrobce: 3290011 The FL dies is used to size the cartridge case on full length. In addition to a removable expander our FL dies have an integrated primer ejector pin. All used spindles, the expander and ejector pin can be replaced easily if necessary, with just little effort. Calibration takes place when the cartridge case is pushed into the die. The neck of the case is calibrated from the inside when it is moved out of the die. This will form the cartridge case and achieves a correct neck tension. The correct position of the die in the press is set with the lock nut. All relevant components have an article number for easy reordering if necessary. You will find further instructions and assistance in selecting accessories and spare parts in the manual.
7199 CZK 0 7 199,00 Kč *
Bude pořízeno od dodavatele po vaší objednávce
Doba dodání cca 14-30 týdnů.
Vlastnosti: Thread: 1 1/4
Produkt č.: EU2013032
Full Length Die 300 Rem Ultra Mag.
Číslo výrobce: 3292211 The FL dies is used to size the cartridge case on full length. In addition to a removable expander our FL dies have an integrated primer ejector pin. All used spindles, the expander and ejector pin can be replaced easily if necessary, with just little effort. Calibration takes place when the cartridge case is pushed into the die. The neck of the case is calibrated from the inside when it is moved out of the die. This will form the cartridge case and achieves a correct neck tension. The correct position of the die in the press is set with the lock nut. All relevant components have an article number for easy reordering if necessary. You will find further instructions and assistance in selecting accessories and spare parts in the manual.
7199 CZK 0 7 199,00 Kč *
Bude pořízeno od dodavatele po vaší objednávce
Doba dodání cca 14-30 týdnů.
Vlastnosti: Thread: 1 1/4
Produkt č.: EU2013034
Full Length Die 300 WSM
Číslo výrobce: 3293411 The FL dies is used to size the cartridge case on full length. In addition to a removable expander our FL dies have an integrated primer ejector pin. All used spindles, the expander and ejector pin can be replaced easily if necessary, with just little effort. Calibration takes place when the cartridge case is pushed into the die. The neck of the case is calibrated from the inside when it is moved out of the die. This will form the cartridge case and achieves a correct neck tension. The correct position of the die in the press is set with the lock nut. All relevant components have an article number for easy reordering if necessary. You will find further instructions and assistance in selecting accessories and spare parts in the manual.
7199 CZK 0 7 199,00 Kč *
Bude pořízeno od dodavatele po vaší objednávce
Doba dodání cca 14-30 týdnů.
Vlastnosti: Thread: 1 1/4
Produkt č.: EU2013035
Full Length Die 303 British
Číslo výrobce: 3293611 The FL dies is used to size the cartridge case on full length. In addition to a removable expander our FL dies have an integrated primer ejector pin. All used spindles, the expander and ejector pin can be replaced easily if necessary, with just little effort. Calibration takes place when the cartridge case is pushed into the die. The neck of the case is calibrated from the inside when it is moved out of the die. This will form the cartridge case and achieves a correct neck tension. The correct position of the die in the press is set with the lock nut. All relevant components have an article number for easy reordering if necessary. You will find further instructions and assistance in selecting accessories and spare parts in the manual.
4799 CZK 0 4 799,00 Kč *
Bude pořízeno od dodavatele po vaší objednávce
Doba dodání cca 14-30 týdnů.
Vlastnosti: Thread: 1 1/4
Produkt č.: EU2013036
Full Length Die 8x60 S
Číslo výrobce: 3323611 The FL dies is used to size the cartridge case on full length. In addition to a removable expander our FL dies have an integrated primer ejector pin. All used spindles, the expander and ejector pin can be replaced easily if necessary, with just little effort. Calibration takes place when the cartridge case is pushed into the die. The neck of the case is calibrated from the inside when it is moved out of the die. This will form the cartridge case and achieves a correct neck tension. The correct position of the die in the press is set with the lock nut. All relevant components have an article number for easy reordering if necessary. You will find further instructions and assistance in selecting accessories and spare parts in the manual.
4799 CZK 0 4 799,00 Kč *
Bude pořízeno od dodavatele po vaší objednávce
Doba dodání cca 14-30 týdnů.
Vlastnosti: Thread: 1 1/4
Produkt č.: EU2013037
Full Length Die 8x64 S
Číslo výrobce: 3326011 The FL dies is used to size the cartridge case on full length. In addition to a removable expander our FL dies have an integrated primer ejector pin. All used spindles, the expander and ejector pin can be replaced easily if necessary, with just little effort. Calibration takes place when the cartridge case is pushed into the die. The neck of the case is calibrated from the inside when it is moved out of the die. This will form the cartridge case and achieves a correct neck tension. The correct position of the die in the press is set with the lock nut. All relevant components have an article number for easy reordering if necessary. You will find further instructions and assistance in selecting accessories and spare parts in the manual.
4799 CZK 0 4 799,00 Kč *
Bude pořízeno od dodavatele po vaší objednávce
Doba dodání cca 14-30 týdnů.
Vlastnosti: Thread: 1 1/4
Produkt č.: EU2013038
Full Length Die 8x75 RS
Číslo výrobce: 3330411 The FL dies is used to size the cartridge case on full length. In addition to a removable expander our FL dies have an integrated primer ejector pin. All used spindles, the expander and ejector pin can be replaced easily if necessary, with just little effort. Calibration takes place when the cartridge case is pushed into the die. The neck of the case is calibrated from the inside when it is moved out of the die. This will form the cartridge case and achieves a correct neck tension. The correct position of the die in the press is set with the lock nut. All relevant components have an article number for easy reordering if necessary. You will find further instructions and assistance in selecting accessories and spare parts in the manual.
5999 CZK 0 5 999,00 Kč *
Bude pořízeno od dodavatele po vaší objednávce
Doba dodání cca 14-30 týdnů.
Vlastnosti: Thread: 1 1/4
Produkt č.: EU2013039
Full Length Die 8,5x63
Číslo výrobce: 3374811 The FL dies is used to size the cartridge case on full length. In addition to a removable expander our FL dies have an integrated primer ejector pin. All used spindles, the expander and ejector pin can be replaced easily if necessary, with just little effort. Calibration takes place when the cartridge case is pushed into the die. The neck of the case is calibrated from the inside when it is moved out of the die. This will form the cartridge case and achieves a correct neck tension. The correct position of the die in the press is set with the lock nut. All relevant components have an article number for easy reordering if necessary. You will find further instructions and assistance in selecting accessories and spare parts in the manual.
5999 CZK 0 5 999,00 Kč *
Bude pořízeno od dodavatele po vaší objednávce
Doba dodání cca 14-30 týdnů.
Vlastnosti: Thread: 1 1/4
Produkt č.: EU2013040
Full Length Die 338 Blaser Mag
Číslo výrobce: 3382911 The FL dies is used to size the cartridge case on full length. In addition to a removable expander our FL dies have an integrated primer ejector pin. All used spindles, the expander and ejector pin can be replaced easily if necessary, with just little effort. Calibration takes place when the cartridge case is pushed into the die. The neck of the case is calibrated from the inside when it is moved out of the die. This will form the cartridge case and achieves a correct neck tension. The correct position of the die in the press is set with the lock nut. All relevant components have an article number for easy reordering if necessary. You will find further instructions and assistance in selecting accessories and spare parts in the manual.
7199 CZK 0 7 199,00 Kč *
Bude pořízeno od dodavatele po vaší objednávce
Doba dodání cca 14-30 týdnů.
Vlastnosti: Thread: 1 1/4
Produkt č.: EU2013041
Full Length Die 338 Federal
Číslo výrobce: 3383511 The FL dies is used to size the cartridge case on full length. In addition to a removable expander our FL dies have an integrated primer ejector pin. All used spindles, the expander and ejector pin can be replaced easily if necessary, with just little effort. Calibration takes place when the cartridge case is pushed into the die. The neck of the case is calibrated from the inside when it is moved out of the die. This will form the cartridge case and achieves a correct neck tension. The correct position of the die in the press is set with the lock nut. All relevant components have an article number for easy reordering if necessary. You will find further instructions and assistance in selecting accessories and spare parts in the manual.
7199 CZK 0 7 199,00 Kč *
Bude pořízeno od dodavatele po vaší objednávce
Doba dodání cca 14-30 týdnů.
Vlastnosti: Thread: 1 1/4
Produkt č.: EU2013042
Full Length Die 338 Norma Mag
Číslo výrobce: 3384211 The FL dies is used to size the cartridge case on full length. In addition to a removable expander our FL dies have an integrated primer ejector pin. All used spindles, the expander and ejector pin can be replaced easily if necessary, with just little effort. Calibration takes place when the cartridge case is pushed into the die. The neck of the case is calibrated from the inside when it is moved out of the die. This will form the cartridge case and achieves a correct neck tension. The correct position of the die in the press is set with the lock nut. All relevant components have an article number for easy reordering if necessary. You will find further instructions and assistance in selecting accessories and spare parts in the manual.
7199 CZK 0 7 199,00 Kč *
Bude pořízeno od dodavatele po vaší objednávce
Doba dodání cca 14-30 týdnů.
Vlastnosti: Thread: 1 1/4
Produkt č.: EU2013043
Full Length Die 338 RCM
Číslo výrobce: 3385111 The FL dies is used to size the cartridge case on full length. In addition to a removable expander our FL dies have an integrated primer ejector pin. All used spindles, the expander and ejector pin can be replaced easily if necessary, with just little effort. Calibration takes place when the cartridge case is pushed into the die. The neck of the case is calibrated from the inside when it is moved out of the die. This will form the cartridge case and achieves a correct neck tension. The correct position of the die in the press is set with the lock nut. All relevant components have an article number for easy reordering if necessary. You will find further instructions and assistance in selecting accessories and spare parts in the manual.
5999 CZK 0 5 999,00 Kč *
Bude pořízeno od dodavatele po vaší objednávce
Doba dodání cca 14-30 týdnů.
Vlastnosti: Thread: 1 1/4
Produkt č.: EU2013044
Full Length Die 338 Rem Ultra Mag
Číslo výrobce: 3385311 The FL dies is used to size the cartridge case on full length. In addition to a removable expander our FL dies have an integrated primer ejector pin. All used spindles, the expander and ejector pin can be replaced easily if necessary, with just little effort. Calibration takes place when the cartridge case is pushed into the die. The neck of the case is calibrated from the inside when it is moved out of the die. This will form the cartridge case and achieves a correct neck tension. The correct position of the die in the press is set with the lock nut. All relevant components have an article number for easy reordering if necessary. You will find further instructions and assistance in selecting accessories and spare parts in the manual.
7199 CZK 0 7 199,00 Kč *
Bude pořízeno od dodavatele po vaší objednávce
Doba dodání cca 14-30 týdnů.
Vlastnosti: Thread: 1 1/4
Produkt č.: EU2013045
Full Length Die 338 Win Mag
Číslo výrobce: 3385611 The FL dies is used to size the cartridge case on full length. In addition to a removable expander our FL dies have an integrated primer ejector pin. All used spindles, the expander and ejector pin can be replaced easily if necessary, with just little effort. Calibration takes place when the cartridge case is pushed into the die. The neck of the case is calibrated from the inside when it is moved out of the die. This will form the cartridge case and achieves a correct neck tension. The correct position of the die in the press is set with the lock nut. All relevant components have an article number for easy reordering if necessary. You will find further instructions and assistance in selecting accessories and spare parts in the manual.
7199 CZK 0 7 199,00 Kč *
Bude pořízeno od dodavatele po vaší objednávce
Doba dodání cca 14-30 týdnů.
Vlastnosti: Thread: 1 1/4
Produkt č.: EU2013046
Full Length Die 350 Mag Rigby
Číslo výrobce: 3439211 The FL dies is used to size the cartridge case on full length. In addition to a removable expander our FL dies have an integrated primer ejector pin. All used spindles, the expander and ejector pin can be replaced easily if necessary, with just little effort. Calibration takes place when the cartridge case is pushed into the die. The neck of the case is calibrated from the inside when it is moved out of the die. This will form the cartridge case and achieves a correct neck tension. The correct position of the die in the press is set with the lock nut. All relevant components have an article number for easy reordering if necessary. You will find further instructions and assistance in selecting accessories and spare parts in the manual.
5999 CZK 0 5 999,00 Kč *
Bude pořízeno od dodavatele po vaší objednávce
Doba dodání cca 14-30 týdnů.
Vlastnosti: Thread: 1 1/4
Produkt č.: EU2013047
Full Length Die 358 Win
Číslo výrobce: 3445611 The FL dies is used to size the cartridge case on full length. In addition to a removable expander our FL dies have an integrated primer ejector pin. All used spindles, the expander and ejector pin can be replaced easily if necessary, with just little effort. Calibration takes place when the cartridge case is pushed into the die. The neck of the case is calibrated from the inside when it is moved out of the die. This will form the cartridge case and achieves a correct neck tension. The correct position of the die in the press is set with the lock nut. All relevant components have an article number for easy reordering if necessary. You will find further instructions and assistance in selecting accessories and spare parts in the manual.
5999 CZK 0 5 999,00 Kč *
Bude pořízeno od dodavatele po vaší objednávce
Doba dodání cca 14-30 týdnů.
Vlastnosti: Thread: 1 1/4
Produkt č.: EU2013048
Full Length Die 9,3x64 Br
Číslo výrobce: 3459611 The FL dies is used to size the cartridge case on full length. In addition to a removable expander our FL dies have an integrated primer ejector pin. All used spindles, the expander and ejector pin can be replaced easily if necessary, with just little effort. Calibration takes place when the cartridge case is pushed into the die. The neck of the case is calibrated from the inside when it is moved out of the die. This will form the cartridge case and achieves a correct neck tension. The correct position of the die in the press is set with the lock nut. All relevant components have an article number for easy reordering if necessary. You will find further instructions and assistance in selecting accessories and spare parts in the manual.
5999 CZK 0 5 999,00 Kč *
Bude pořízeno od dodavatele po vaší objednávce
Doba dodání cca 14-30 týdnů.
Vlastnosti: Thread: 1 1/4
Produkt č.: EU2013049
Full Length Die 9,3x74 R
Číslo výrobce: 3463211 The FL dies is used to size the cartridge case on full length. In addition to a removable expander our FL dies have an integrated primer ejector pin. All used spindles, the expander and ejector pin can be replaced easily if necessary, with just little effort. Calibration takes place when the cartridge case is pushed into the die. The neck of the case is calibrated from the inside when it is moved out of the die. This will form the cartridge case and achieves a correct neck tension. The correct position of the die in the press is set with the lock nut. All relevant components have an article number for easy reordering if necessary. You will find further instructions and assistance in selecting accessories and spare parts in the manual.
4799 CZK 0 4 799,00 Kč *
Bude pořízeno od dodavatele po vaší objednávce
Doba dodání cca 14-30 týdnů.
Vlastnosti: Thread: 1 1/4
Produkt č.: EU2013050
Full Length Die 375 Blaser Mag
Číslo výrobce: 3471811 The FL dies is used to size the cartridge case on full length. In addition to a removable expander our FL dies have an integrated primer ejector pin. All used spindles, the expander and ejector pin can be replaced easily if necessary, with just little effort. Calibration takes place when the cartridge case is pushed into the die. The neck of the case is calibrated from the inside when it is moved out of the die. This will form the cartridge case and achieves a correct neck tension. The correct position of the die in the press is set with the lock nut. All relevant components have an article number for easy reordering if necessary. You will find further instructions and assistance in selecting accessories and spare parts in the manual.
7199 CZK 0 7 199,00 Kč *
Bude pořízeno od dodavatele po vaší objednávce
Doba dodání cca 14-30 týdnů.
Vlastnosti: Thread: 1 1/4
Produkt č.: EU2013051
Full Length Die 378 Wea Mag
Číslo výrobce: 3484411 The FL dies is used to size the cartridge case on full length. In addition to a removable expander our FL dies have an integrated primer ejector pin. All used spindles, the expander and ejector pin can be replaced easily if necessary, with just little effort. Calibration takes place when the cartridge case is pushed into the die. The neck of the case is calibrated from the inside when it is moved out of the die. This will form the cartridge case and achieves a correct neck tension. The correct position of the die in the press is set with the lock nut. All relevant components have an article number for easy reordering if necessary. You will find further instructions and assistance in selecting accessories and spare parts in the manual.
7199 CZK 0 7 199,00 Kč *
Bude pořízeno od dodavatele po vaší objednávce
Doba dodání cca 14-30 týdnů.
Vlastnosti: Thread: 1 1/4
Produkt č.: EU2013052
Full Length Die 450/400 NE 3"
Číslo výrobce: 3535611 The FL dies is used to size the cartridge case on full length. In addition to a removable expander our FL dies have an integrated primer ejector pin. All used spindles, the expander and ejector pin can be replaced easily if necessary, with just little effort. Calibration takes place when the cartridge case is pushed into the die. The neck of the case is calibrated from the inside when it is moved out of the die. This will form the cartridge case and achieves a correct neck tension. The correct position of the die in the press is set with the lock nut. All relevant components have an article number for easy reordering if necessary. You will find further instructions and assistance in selecting accessories and spare parts in the manual.
7199 CZK 0 7 199,00 Kč *
Bude pořízeno od dodavatele po vaší objednávce
Doba dodání cca 14-30 týdnů.
Vlastnosti: Thread: 1 1/4
Produkt č.: EU2013053
Full Length Die 416 Rem Mag
Číslo výrobce: 3562411 The FL dies is used to size the cartridge case on full length. In addition to a removable expander our FL dies have an integrated primer ejector pin. All used spindles, the expander and ejector pin can be replaced easily if necessary, with just little effort. Calibration takes place when the cartridge case is pushed into the die. The neck of the case is calibrated from the inside when it is moved out of the die. This will form the cartridge case and achieves a correct neck tension. The correct position of the die in the press is set with the lock nut. All relevant components have an article number for easy reordering if necessary. You will find further instructions and assistance in selecting accessories and spare parts in the manual.
5999 CZK 0 5 999,00 Kč *
Bude pořízeno od dodavatele po vaší objednávce
Doba dodání cca 14-30 týdnů.
Vlastnosti: Thread: 1 1/4
Produkt č.: EU2013054
Full Length Die 416 Rigby
Číslo výrobce: 3562811 The FL dies is used to size the cartridge case on full length. In addition to a removable expander our FL dies have an integrated primer ejector pin. All used spindles, the expander and ejector pin can be replaced easily if necessary, with just little effort. Calibration takes place when the cartridge case is pushed into the die. The neck of the case is calibrated from the inside when it is moved out of the die. This will form the cartridge case and achieves a correct neck tension. The correct position of the die in the press is set with the lock nut. All relevant components have an article number for easy reordering if necessary. You will find further instructions and assistance in selecting accessories and spare parts in the manual.
7199 CZK 0 7 199,00 Kč *
Bude pořízeno od dodavatele po vaší objednávce
Doba dodání cca 14-30 týdnů.
Vlastnosti: Thread: 1 1/4
Produkt č.: EU2013055
Full Length Die 10,75x68
Číslo výrobce: 3572411 The FL dies is used to size the cartridge case on full length. In addition to a removable expander our FL dies have an integrated primer ejector pin. All used spindles, the expander and ejector pin can be replaced easily if necessary, with just little effort. Calibration takes place when the cartridge case is pushed into the die. The neck of the case is calibrated from the inside when it is moved out of the die. This will form the cartridge case and achieves a correct neck tension. The correct position of the die in the press is set with the lock nut. All relevant components have an article number for easy reordering if necessary. You will find further instructions and assistance in selecting accessories and spare parts in the manual.
5999 CZK 0 5 999,00 Kč *
Bude pořízeno od dodavatele po vaší objednávce
Doba dodání cca 14-30 týdnů.
Vlastnosti: Thread: 1 1/4
Produkt č.: EU2013056
Full Length Die 45-70 Gov't
Číslo výrobce: 3645211 The FL dies is used to size the cartridge case on full length. In addition to a removable expander our FL dies have an integrated primer ejector pin. All used spindles, the expander and ejector pin can be replaced easily if necessary, with just little effort. Calibration takes place when the cartridge case is pushed into the die. The neck of the case is calibrated from the inside when it is moved out of the die. This will form the cartridge case and achieves a correct neck tension. The correct position of the die in the press is set with the lock nut. All relevant components have an article number for easy reordering if necessary. You will find further instructions and assistance in selecting accessories and spare parts in the manual.
5999 CZK 0 5 999,00 Kč *
Bude pořízeno od dodavatele po vaší objednávce
Doba dodání cca 14-30 týdnů.
Vlastnosti: Thread: 1 1/4
Produkt č.: EU2013057
Full Length Die 458 Lott
Číslo výrobce: 3678011 The FL dies is used to size the cartridge case on full length. In addition to a removable expander our FL dies have an integrated primer ejector pin. All used spindles, the expander and ejector pin can be replaced easily if necessary, with just little effort. Calibration takes place when the cartridge case is pushed into the die. The neck of the case is calibrated from the inside when it is moved out of the die. This will form the cartridge case and achieves a correct neck tension. The correct position of the die in the press is set with the lock nut. All relevant components have an article number for easy reordering if necessary. You will find further instructions and assistance in selecting accessories and spare parts in the manual.
5999 CZK 0 5 999,00 Kč *
Bude pořízeno od dodavatele po vaší objednávce
Doba dodání cca 14-30 týdnů.
Vlastnosti: Thread: 1 1/4
Produkt č.: EU2013058
Full Length Die 470 NE
Číslo výrobce: 3694011 The FL dies is used to size the cartridge case on full length. In addition to a removable expander our FL dies have an integrated primer ejector pin. All used spindles, the expander and ejector pin can be replaced easily if necessary, with just little effort. Calibration takes place when the cartridge case is pushed into the die. The neck of the case is calibrated from the inside when it is moved out of the die. This will form the cartridge case and achieves a correct neck tension. The correct position of the die in the press is set with the lock nut. All relevant components have an article number for easy reordering if necessary. You will find further instructions and assistance in selecting accessories and spare parts in the manual.
7199 CZK 0 7 199,00 Kč *
Bude pořízeno od dodavatele po vaší objednávce
Doba dodání cca 14-30 týdnů.
Vlastnosti: Thread: 1 1/4
Produkt č.: EU2013059
Full Length Die 500 NE 3''
Číslo výrobce: 3718011 The FL dies is used to size the cartridge case on full length. In addition to a removable expander our FL dies have an integrated primer ejector pin. All used spindles, the expander and ejector pin can be replaced easily if necessary, with just little effort. Calibration takes place when the cartridge case is pushed into the die. The neck of the case is calibrated from the inside when it is moved out of the die. This will form the cartridge case and achieves a correct neck tension. The correct position of the die in the press is set with the lock nut. All relevant components have an article number for easy reordering if necessary. You will find further instructions and assistance in selecting accessories and spare parts in the manual.
7199 CZK 0 7 199,00 Kč *
Bude pořízeno od dodavatele po vaší objednávce
Doba dodání cca 14-30 týdnů.
Vlastnosti: Thread: 1 1/4
Produkt č.: EU2013060
Full Length Die 600 NE
Číslo výrobce: 3736411 The FL dies is used to size the cartridge case on full length. In addition to a removable expander our FL dies have an integrated primer ejector pin. All used spindles, the expander and ejector pin can be replaced easily if necessary, with just little effort. Calibration takes place when the cartridge case is pushed into the die. The neck of the case is calibrated from the inside when it is moved out of the die. This will form the cartridge case and achieves a correct neck tension. The correct position of the die in the press is set with the lock nut. All relevant components have an article number for easy reordering if necessary. You will find further instructions and assistance in selecting accessories and spare parts in the manual.
9299 CZK 0 9 299,00 Kč *
Bude pořízeno od dodavatele po vaší objednávce
Doba dodání cca 14-30 týdnů.
Vlastnosti: Thread: 1 1/4
Produkt č.: EU2013061
Full Length Die 700 H&H NE
Číslo výrobce: 3738411 The FL dies is used to size the cartridge case on full length. In addition to a removable expander our FL dies have an integrated primer ejector pin. All used spindles, the expander and ejector pin can be replaced easily if necessary, with just little effort. Calibration takes place when the cartridge case is pushed into the die. The neck of the case is calibrated from the inside when it is moved out of the die. This will form the cartridge case and achieves a correct neck tension. The correct position of the die in the press is set with the lock nut. All relevant components have an article number for easy reordering if necessary. You will find further instructions and assistance in selecting accessories and spare parts in the manual.
10999 CZK 0 10 999,00 Kč *
Bude pořízeno od dodavatele po vaší objednávce
Doba dodání cca 14-30 týdnů.
Vlastnosti: Thread: 1 1/4

Objevte Full Length Die 1 1/4 pro 300 Wea Mag! 🔧 Snadné použití, výměna komponentů a přesné kalibrace pro dokonalé náboje.

Zpět na začátek