Košík je prázdný.

Košík

Help a kontakt

Doprava zdarma při nákupu nad 5 999,00 Kč

100denní politika vrácení

Novinky

Slevy

Přes 300 000 zákazníků - děkujeme vám!

4,93/5 "Velmi dobré" (1400+ hodnocení)

40 000+ produktů pro lov a střelbu

ED BROWN
FRONT SIGHT TOOL for GLOCK®

800732952000 087017001

Easily Removes/Installs Glock Front Sights

Fits the small, hex head screw that holds Glock aftermarket sights in place. Makes installing replacement sights or removing sights for maintenance easier with less chance of damage. Hex shank fits Magna-Tip® screwdrivers. Not for use with 6" slides.

SPECS: Steel.

Další...

Snadná instalace/odstranění předních mířidel Glock

Pasuje na malý, šestihranný šroub, který drží mířidla Glock aftermarket na místě. Umožňuje snadnější instalaci náhradních mířidel nebo jejich odstranění k údržbě s menším rizikem poškození. Šestihranná stopka se hodí pro šroubováky Magna-Tip®. Není určeno pro použití se 6" závěry.

SPECS: Ocel.

Další...

Hodnocení zákazníků pro položku ED BROWN FRONT SIGHT TOOL FOR GLOCK

Počet hodnocení: 9
Od brownells.com: 9
Průměrné hodnocení: 3,1

Decent if on a budget (5.10.2009)

This tool works fairly well if you just need to install a front sight or two and don't want to spent a lot of money.

There is a bit too much depth to the socket, allowing the nut for the front sight to rotate a bit - this makes getting the threaded portion of the nut lined up properly with the hole in the front sight tricky.

Can be made to work (4.6.2010)

I know the information says it doesn't fit Glock Longslides, I should have read further before buying. The tool's diameter is .262 and the hole on a longslide is .250. The tool's instructions say dremel out the hole on the slide, NO WAY! Put this in my drill press and used a diamond hone to get it down to the right size and now I have a front sight tool that works in all Glocks. The hex head fits in a socked which I really like. My recommendation is buy a tool that works if you can find one. If you can't, this can be made to work.

Trijicon includes this tool with sights (23.6.2010)

I got this same tool in every package of Tritium sights I bought from Trijicon. You may not want to purchase this separately. It is a cheap but necessary tool for removing Glock Front sights. It is not necessary to have to remove the manufacturer's plastic sight

Works fine (19.3.2011)

This tool works on the new Glock 3/16" sight nuts as well as Meprolights.

piece of junk (13.4.2011)

screw did not in fit this tool squarely. either screw or tool was defective. i had to put screw in with tweezers and fingers. NOT WORTH THE [$]. SAVE YOUR $$$ AND GO TO PLAN "B"...thanks anyway.

One trick pony (2.9.2012)

Even though it has only one use it does the job. Sturdy, handy, and necessary for any Glock owner.
Best buy and it was delivered in 2 days

Works After Modification (1.2.2014)

I had already made a tool for Glock front sight screws by filing down a 3/16" socket bit for a screwdriver. I was hoping that the EB bit would fit out of the package, but I had to file it down to make the walls of the socket thin enough to fit down over the screw head. After a little careful filing, it worked fine. Being SS, I expect it to be more durable than the socket bit, but time will tell. As other reviews have mentioned, the hole in the end could have been a lot shallower. I packed mine with tissue paper to
keep the screw from disappearing into the hole.

Don't Waste Your Time/Money (24.3.2016)

This tool doesn't work very well. Once it arrived the instructions told you to modify your gun with a dremel tool, so the this tool could fit onto the hex head screw. I'm not going to use a dremel on my Glock to replace the sights. I am going to buy another tool.

good but not (26.11.2017)

The Ed Brown glock front site tool is well made. The machining is excellant but it is short in length, when the driver is on the front site screw head, it is next to impossible to get a grip on the tool to unscrew and securely screw the screw back in place. You have to place a socket on the head of the tool to use it which for the money it could just be made longer.

Přečtete si další hodnocení na webu brownells.com

999 999 1 CZK

Produkt č.: 087017001
ED BROWN FRONT SIGHT TOOL FOR GLOCK
Číslo výrobce: 952 800732952000 Pasuje na malý, šestihranný šroub, který drží mířidla Glock aftermarket na místě. Umožňuje snadnější instalaci náhradních mířidel nebo jejich odstranění k údržbě s menším rizikem poškození. Šestihranná stopka se hodí pro šroubováky Magna-Tip®. Není určeno pro použití se 6" závěry.

999 CZK 1 999,00 Kč *

Dodací lhůta je přibližně 14-21 dní.
1 Počet ks. skladem USA

Vlastnosti: Make: Glock Model: Universal Handguns

Vložit do nákupního seznamu

Zeptejte se

Podrobnosti

Vložit do nákupního seznamu

Zeptejte se

Top takeaways

Pasuje na malý, šestihranný šroub, který drží mířidla Glock aftermarket na místě.
Umožňuje snadnější instalaci náhradních mířidel nebo jejich odstranění k údržbě s menším rizikem poškození.
Šestihranná stopka se hodí pro šroubováky Magna-Tip®.

Atributy

Model: Universal Handguns Udělat: Glock Dodací hmotnost: 0,014kg Šířka přepravy: 83mm Délka přepravy: 146mm UPC : 800732952000

Detail produktů

Made in USA

Odpovědný hospodářský subjekt podle nařízení EU

Brownells Arms s.r.o.
Bílanská 1861/81
76701 Kroměříž
Česká republika
info@brownells.cz

Nástroj FRONT SIGHT pro Glock® od ED BROWN usnadňuje instalaci mířidel 🔧 a minimalizuje riziko poškození. Ideální pro údržbu!

Easily Removes/Installs Glock Front Sights

SPECS: Steel.

Další...

Snadná instalace/odstranění předních mířidel Glock

SPECS: Ocel.

Další...

Hodnocení zákazníků pro položku ED BROWN FRONT SIGHT TOOL FOR GLOCK

Počet hodnocení: 9
Od brownells.com: 9
Průměrné hodnocení: 3,1

Decent if on a budget (5.10.2009)

Can be made to work (4.6.2010)

Trijicon includes this tool with sights (23.6.2010)

Works fine (19.3.2011)

This tool works on the new Glock 3/16" sight nuts as well as Meprolights.

piece of junk (13.4.2011)

screw did not in fit this tool squarely. either screw or tool was defective. i had to put screw in with tweezers and fingers. NOT WORTH THE [$]. SAVE YOUR $$$ AND GO TO PLAN "B"...thanks anyway.

One trick pony (2.9.2012)

Even though it has only one use it does the job. Sturdy, handy, and necessary for any Glock owner.
Best buy and it was delivered in 2 days

Works After Modification (1.2.2014)