Barrel Nut Torq Wrench for DPMS & KAC Rifles. This wrench allows the shooter to put the exact amount of pressure needed on the barrel nut while attaching the barrel to the receiver. Constructed of 3/8 high steel with 4 lugs on each side to accommodate the DPMS and KAC Barrel Nuts. Works with any 3/8 or ½ drive torque wrench. This wrench is for 24-tooth free float barrel nuts.
Klíč na matici hlavně pro pušky DPMS & KAC. Tento klíč umožňuje střelci aplikovat přesný tlak na matici hlavně při připevňování hlavně k přijímači. Je vyroben z 3/8 palcové vysokopevnostní oceli s 4 výstupky na každé straně pro použití s DPMS a KAC maticemi hlavně. Pracuje s jakýmkoli 3/8 nebo ½ palcovým momentovým klíčem. Tento klíč je určen pro 24-zubé volně plovoucí matici hlavně.
SPECIFIKACE: Hmotnost - .525 liber. Vhodné pro DPMS, R-25, Knights matice hlavně v .308.
Počet hodnocení: 6
Od brownells.com: 6
Průměrné hodnocení: 3,8
Pins bent at 30 ft-lbs of torque(27.4.2013)
Set torque wrench to 30 ft-lbs. Hand tightened barrel nut first. After getting to 30 ft-lbs I noticed two of the pins bent from the torque. With bent pins, the wrench is no longer usable. So now waiting on the DPMS wrench to get the barrel nut lined up for the gas tube.
Good tool no issues(2.9.2013)
I used this wrench for 10 308 builds with no issues at all. The only thing I would suggest for any wrenches of this type is lengthen the drive squares farther from center so all torque wrenches will work. Great product
Works Like A Charm(18.12.2014)
Awesome tool. Well constructed.
On my first try to torque down my barrel nut on 30 ft. lbs., it went very smooth. Second time I pushed it to 40, no problems at all. Third time I pushed it to 50 and barely got my gas tube opening aligned. Lastly pushed it to 55 and nailed it with a breeze.
To prevent pins bent, flush the tool all the way to the barrel nut and you'll be styling.
Too big for my DPMS 308 Nut(16.3.2016)
Not sure how many stars to give an item that seems to be good quality, but doesn't fit what it should. I bought this wrench to use on an AR-308 built using a DPMS barrel nut ( 231000300 ), only to find that it was too big. Ended up using my PRI standard AR barrel nut wrench.
Quality Tool(23.3.2016)
i bought this to do an M5 build(6.5cm) using the Aero Precision barrel nut. i found out i need an AR15 wrench and not this one! i will be returning it but not due to bad quality, just an errror in judgement on my part(didn't read AP's intructions)!
the only thing i didn't like about the tool just looking at it is the pins seem to be overly long! i think they can be shorter.
i gave it 4 stars just for the quality as i was not able to use it.
GREAT Customer service(14.11.2017)
This wrench was missing from a recent order, (shipping box was crushed and ripped at some point In transit) customer service sent a replacement out quickly. Thank You!
Produkt č.: 100010967 PRECISION REFLEX DPMS/KAC 308 BARREL NUT WRENCH Číslo výrobce: #03-0086090222549838 Klíč na matici hlavně pro pušky DPMS & KAC. Tento klíč umožňuje střelci aplikovat přesný tlak na matici hlavně při připevňování hlavně k přijímači. Je vyroben z 3/8 palcové vysokopevnostní oceli s 4 výstupky na každé straně pro použití s DPMS a KAC maticemi hlavně. Pracuje s jakýmkoli 3/8 nebo ½ palcovým momentovým klíčem. Tento klíč je určen pro 24-zubé volně plovoucí matici hlavně.
1349CZK01 349,00 Kč
*
Předbjednávka, dodací lhůta je přibližně 4-12 týdny ze skladu z USA.
Barrel Nut Torq Wrench for DPMS & KAC Rifles. This wrench allows the shooter to put the exact amount of pressure needed on the barrel nut while attaching the barrel to the receiver. Constructed of 3/8 high steel with 4 lugs on each side to accommodate the DPMS and KAC Barrel Nuts. Works with any 3/8 or ½ drive torque wrench. This wrench is for 24-tooth free float barrel nuts.
Klíč na matici hlavně pro pušky DPMS & KAC. Tento klíč umožňuje střelci aplikovat přesný tlak na matici hlavně při připevňování hlavně k přijímači. Je vyroben z 3/8 palcové vysokopevnostní oceli s 4 výstupky na každé straně pro použití s DPMS a KAC maticemi hlavně. Pracuje s jakýmkoli 3/8 nebo ½ palcovým momentovým klíčem. Tento klíč je určen pro 24-zubé volně plovoucí matici hlavně.
SPECIFIKACE: Hmotnost - .525 liber. Vhodné pro DPMS, R-25, Knights matice hlavně v .308.
Počet hodnocení: 6
Od brownells.com: 6
Průměrné hodnocení: 3,8
Pins bent at 30 ft-lbs of torque(27.4.2013)
Set torque wrench to 30 ft-lbs. Hand tightened barrel nut first. After getting to 30 ft-lbs I noticed two of the pins bent from the torque. With bent pins, the wrench is no longer usable. So now waiting on the DPMS wrench to get the barrel nut lined up for the gas tube.
Good tool no issues(2.9.2013)
I used this wrench for 10 308 builds with no issues at all. The only thing I would suggest for any wrenches of this type is lengthen the drive squares farther from center so all torque wrenches will work. Great product
Works Like A Charm(18.12.2014)
Awesome tool. Well constructed.
On my first try to torque down my barrel nut on 30 ft. lbs., it went very smooth. Second time I pushed it to 40, no problems at all. Third time I pushed it to 50 and barely got my gas tube opening aligned. Lastly pushed it to 55 and nailed it with a breeze.
To prevent pins bent, flush the tool all the way to the barrel nut and you'll be styling.
Too big for my DPMS 308 Nut(16.3.2016)
Not sure how many stars to give an item that seems to be good quality, but doesn't fit what it should. I bought this wrench to use on an AR-308 built using a DPMS barrel nut ( 231000300 ), only to find that it was too big. Ended up using my PRI standard AR barrel nut wrench.
Quality Tool(23.3.2016)
i bought this to do an M5 build(6.5cm) using the Aero Precision barrel nut. i found out i need an AR15 wrench and not this one! i will be returning it but not due to bad quality, just an errror in judgement on my part(didn't read AP's intructions)!
the only thing i didn't like about the tool just looking at it is the pins seem to be overly long! i think they can be shorter.
i gave it 4 stars just for the quality as i was not able to use it.
GREAT Customer service(14.11.2017)
This wrench was missing from a recent order, (shipping box was crushed and ripped at some point In transit) customer service sent a replacement out quickly. Thank You!