The Gibbz Arms G4 Side Charging Upper Receiver is a non-reciprocating upper receiver with a detent to keep the charging handle forward during operation, and uses all mil-spec and most custom bolt carriers without modification. The Gibbz Arms G4 Side Charging Upper Receiver features an enlarged ejection port and will work with AR-15 calibers from 22LR to 50 Beowulf. Beveled Ejection Port Full 15 Slot Picatinny Rail Bolt carrier door in the rear to allow for easy bolt carrier removal and gasses in during operation (important for suppressed fire). Compatible with Mil-Spec and most other lowers receivers Enhanced cam-pin optimized for side charge upper with Melonite coating is included Charging handle cover keeping operating gasses in (also important for suppressed fire). Weight: 13.0 oz. Dimensions: 8.9 x 2.9 x 2.9 in Made in the USA NOTE: Must use the G4 Enhanced Cam Pin (included)- use of standard cam pin will cause BCG to lock up and cause potential damage.
Další...
Horní přijímač Gibbz Arms G4 Side Charging je horní přijímač s bočním nabíjením, který není reciprokující a má zádržku udržující páku nabíjení vpředu během provozu. Používá všechny standardní vojenské specifikace (mil-spec) a většinu vlastních nosičů závěru bez úprav. Horní přijímač Gibbz Arms G4 Side Charging nabízí zvětšený vyhazovací otvor a je kompatibilní s kalibry AR-15 od 22LR po 50 Beowulf. Vykosený vyhazovací otvor Plná 15 slotová Picatinny lišta Dveře nosiče závěru vzadu pro snadné odstranění nosiče závěru a odvádění plynů během provozu (důležité pro tlumenou střelbu). Kompatibilní s Mil-Spec a většinou ostatních spodních přijímačů Vylepšený závěrový kolík optimalizovaný pro horní přijímač s bočním nabíjením s Melonitovou povrchovou úpravou je součástí balení Krytka páky nabíjení udržující provozní plyny uvnitř (také důležité pro tlumenou střelbu). Hmotnost: 13.0 oz. Rozměry: 8.9 x 2.9 x 2.9 palce Vyrobeno v USA POZNÁMKA: Musí se použít vylepšený závěrový kolík G4 (součást balení) - použití standardního závěrového kolíku způsobí zamknutí BCG a potenciální poškození.
Další...
Hodnocení zákazníků pro položku GIBBZ ARMS G4 SIDE CHARGING UPPER RECEIVER
Počet hodnocení: 12
Od brownells.com: 12
Průměrné hodnocení: 4,6
The perfect AR charging system(8.8.2014)
I was looking for a non proprietary side charging system for my AR that didn't require me to modify my bolt carrier. I also didn't want to have the handle flying back and forth as the bolt cycled. This setup gave me exactly what I was looking for. This is one of my favorite AR uppers. I actually own two.... If you are going to use a scope on your AR and want a setup that works flawlessly, this is it. If you are looking for an upper with a dust cover or forward assist...keep looking.
The way the AR15 should have been built.(28.2.2015)
As Uppers go not cheap. However very well made and very well engineered means flawless function, even with a Caldwell Brass Catcher mounted to it.
The only potential negatives are no forward assist or dust cover. However if you keep your rifle clean you really won't ever need a forward assist and I've always felt the dust cover was basically "eye candy".
BTW, combine it with a Gibbz handguard and you will have to look long and hard to find a system that allows the barrel to be mounted and torqued with more ease. Screw on the handguard adapter, line up the notch for the gas tube with a drill bit or gage, clamp the Handguard Adapter in a padded vice, and then torque the barrel nut using the Gibbz tool, a crowfoot and torque wrench. At no point do you have to actually clamp the Upper, all the force is applied to the barrel nut and Handguard Adapter. Unfortunately, Brownell's doesn't carry the Gibbz Arms Handguards at this point so you have to order direct but that is Brownell's loss.
Neatness (10.7.2015)
Ok this is great for a scoped rifle while laying prone.
If your rail buts up even to your upper then this will work if. If it has any prongs it wont work.
I used a JP tube hanguard, Larue scope mount and Magpul UBR stock. Love it.
One complaint would be its a little heavy. I would think they could lighten it.
Also one neat feature is the spring loaded trap door for removing the bcg. Also the gas tube port appears to be threaded in maybe for a piston bushing?
Ignore my previous review(18.8.2015)
My previous comment was a novice mistake. The bolt catch will engage. I have requested my old review be removed.
I have had this upper for about a month now and have been struggling with the Adams gas block. I originally intended to use a standard hand guard but In order for the rifle to cycle properly the piston must be spaced 0.015"-0.025" from the gas block when the bolt is closed. With the bracket provided by the Adams gas block system in place this specification cannot be met (the gap is over 0.025") and the action short strokes . I was forced to use a free float hand guard and now it works flawlessly. Since I tried 2 different barrels from different manufacturers with same result I feel the problem is with the Gibbz upper being a bit to long.
ONE OF THE BEST UPDATES FOR AN AR15(18.8.2015)
THIS UPPER IS IDEAL FOR ANY OPTICS THAT EXTEND OVER THE CHARGE HANDLE AREA. MAKES CHARGING AND CLEARING THE WEAPON A ONE HANDED JOB. IT ALIGNS SMOOTHLY WITH THE YHM SLANT HAND GUARD MOUNTED. THE TOLERANCES ARE VERY TIGHT, WHICH IS A PLUS,BUT BE PREPARED TO HAVE TO TAP THE BARREL TO GET IT TO SEAT.
used for 3 gun build(31.8.2015)
I purchased this to use for building a rifle for 3 gun.
I installed a Samson handguard to it, it required fitting of the handguard tabs between the upper and the handguard. These are anti rotation tabs.
I put a Criterion barrel on it and that fit very well.
The upper to lower fit was tight. I used a tactical machining lower that I got off a prize table.
When you charge the upper, a slide comes back with the charging handle. This hit my lower receiver where you screw in the buffer buttstock tube. I had to either file down the lower or the charging slide. I relieved a little bit on the charging slide. I don't think it affected the functioning at all.
I added a JP LMOS bolt carrier which works great.
I practiced a little with it and then shot the rocky mountain 3 gun match...about 200 rifle rounds, then the noveske 3 gun match....about 125 rounds. It is holding up great and I had no malfunctions with it.
The brass does make a mark on the rear of the ejection port cutout, since there is no brass deflector on this thing.
I also noticed it kicks the shells to about my 5 oclock. But this could also be attributed to my gas system.
I would buy another one.
I used a magpul BADD lever and this allows me to rack the bolt and lock it to the rear with one hand.
Great Design - All AR-15 Purposes(2.12.2015)
I've build twenty one AR-15s with left side charge. Fifteen utilizing the Gibbz left charge receiver with my choice of bolt carrier. Six with the excellent ASA left charge that includes their proprietary bolt carrier. Both fine products.
~ Bob, Houston Collection
Cool design but bad machining(20.1.2016)
The design of the Gibbz side charger is nice but the threading for the barrel nut and the tactical rail was way out of spec on the unit I received.
great upper(18.11.2016)
Put this upper on a SBR with a 10.5" barrel. Looks great. I never used a forward assist in the Marines, and the dust cover is a waste of materiel. Over a thousand break in rounds and no malfunctions. My only problem was putting the barrel nut on. I turned a barrel clamp on a lathe and went that route. Overall I think it's a great unit, runs good, looks good. If you want to step out of the normal AR scene pick one up.
I don't build off anything else(10.7.2017)
This is the perfect AR upper I even built one off the 308 platform that everyone wants when I go to the range. The + & - of the system is the proprietary cam pin and if you are building a piston upper Gibbs site offers a brass piston fitting for the upper and you can also order an extra cam pin, I highly recommend doing both of these things. I have built about 50 ARs with this upper and I have yet to get one back or have anyone not satisfied. This action is exceptionally smooth I have never needed the forward assist. You get that billet smooth look, with the potential for a very light gun and I have never had extraction problems because the ejection port is so big. The only 2 draw backs are the charging handle is a bit short so at times you hit your knuckles on the scope mount (Gibbs now makes a comp handle on there site) and you need a Geissele rod to install the barrel but this is just another excuse to get another tool, there is also a Brownells version of that tool on this site. To sum it up for the money you can't best this upper, I don't have to waist money on a way to expensive Charing handle and on mag changes my cheek weld stays intact this gives me faster fallow up shots. Highly recommended and with Brownells lifetime guarantee it's a no brainer.
First off I have nothing bad to say about this upper. Gibbzs makes some really great quality gun parts. As this is my first side charger upper build, I was impressed with the quality and functionality of the charger along with the fit and finish. Feels natural to charge from the side rather than from the rear. I had no problems mounting the barrel with the Mil Spec "D" Ring and 2 piece drop in handguard. I like the ability to keep my hand by the trigger, my eye on the target and be able to charge the rifle without hitting my face. This side charger should be the new normal on all AR rifles. I have some future builds and I know I am going to change some to the Gibbz side charger. I was so proud of my purchase I decided to paint it in Multicam. You get your moneys worth on this one guys so don't hesitate or have any worries, its a great buy.
Produkt č.: 100015448 GIBBZ ARMS G4 SIDE CHARGING UPPER RECEIVER Číslo výrobce: G4UR869184000004 Horní přijímač Gibbz Arms G4 Side Charging je horní přijímač s bočním nabíjením, který není reciprokující a má zádržku udržující páku nabíjení vpředu během provozu. Používá všechny standardní vojenské specifikace (mil-spec) a většinu vlastních nosičů závěru bez úprav. Horní přijímač Gibbz Arms G4 Side Charging nabízí zvětšený vyhazovací otvor a je kompatibilní s kalibry AR-15 od 22LR po 50 Beowulf. Vykosený vyhazovací otvor Plná 15 slotová Picatinny lišta Dveře nosiče závěru vzadu pro snadné odstranění nosiče závěru a odvádění plynů během provozu (důležité pro tlumenou střelbu). Kompatibilní s Mil-Spec a většinou ostatních spodních přijímačů Vylepšený závěrový kolík optimalizovaný pro horní přijímač s bočním nabíjením s Melonitovou povrchovou úpravou je součástí balení Krytka páky nabíjení udržující provozní plyny uvnitř (také důležité pro tlumenou střelbu). Hmotnost: 13.0 oz. Rozměry: 8.9 x 2.9 x 2.9 palce Vyrobeno v USA POZNÁMKA: Musí se použít vylepšený závěrový kolík G4 (součást balení) - použití standardního závěrového kolíku způsobí zamknutí BCG a potenciální poškození.
Musíte mít 18 let a doložit kopii občanského průkazu
TemporaryOnHold(Platba převodem,převzetí zboží na pobočce)
Musíte doložit kopii zbrojného průkazu(this the ID and documentation that you will need)
Pick up(Vyzvednutí osobně na pobočce v Kroměříži)
Top takeaways
Horní přijímač Gibbz Arms G4 Side Charging je kompatibilní s kalibry AR-15 od 22LR po 50 Beowulf a má zvětšený vyhazovací otvor.
Obsahuje plnou 15 slotovou Picatinny lištu a dveře nosiče závěru vzadu pro snadné odstranění nosiče závěru a odvádění plynů během provozu.
Musí se použít vylepšený závěrový kolík G4 (součást balení), protože použití standardního kolíku může způsobit zamknutí BCG a potenciální poškození.
Atributy
Color:
Black
Finish:
Anodized
Náboje:
223 Remington,5.56 mm NATO
Style:
Stripped
Udělat:
AR-15
Dodací hmotnost: 0,408kgVýška přepravy: 84mmŠířka přepravy: 86mmDélka přepravy: 251mm
UPC
: 869184000004
Detail produktů
Made in USA
US exportní klasifikace: I(g)
Prohlášení o kontrole do destinace: "Tyto položky jsou kontrolovány vládou Spojených států a jsou povoleny na vývoz pouze do země konečného určení k použití konečným příjemcem nebo konečným uživatelem (uživatel,), kteří jsou zde identifikováni. Nesmějí být dále prodány, přepraveny ani jinak zlikvidovány v žádné jiné zemi nebo jiné osobě, než je oprávněn konečný příjemce nebo koncový uživatel, a to buď v jejich původní formě nebo po začlenění do jiných položek, aniž by nejprve získali souhlas od vlády USA nebo byly jinak povoleny."
This item is controlled by the U.S. government and authorized for export only to the country of ultimate destination for use by the ultimate consignee or end-user(s) herein identified. It may not be resold, transferred, or otherwise disposed of, to any other country or to any person other than the authorized ultimate consignee or end-user(s), either in their original form or after being incorporated into other items, without first obtaining approval from the U.S. government or as otherwise authorized by U.S. law and regulations.
Objevte horní přijímač Gibbz Arms G4 Side Charging pro AR-15. 🛠️ Kompatibilní s různými kalibry a vysoce funkční design!
The Gibbz Arms G4 Side Charging Upper Receiver is a non-reciprocating upper receiver with a detent to keep the charging handle forward during operation, and uses all mil-spec and most custom bolt carriers without modification. The Gibbz Arms G4 Side Charging Upper Receiver features an enlarged ejection port and will work with AR-15 calibers from 22LR to 50 Beowulf. Beveled Ejection Port Full 15 Slot Picatinny Rail Bolt carrier door in the rear to allow for easy bolt carrier removal and gasses in during operation (important for suppressed fire). Compatible with Mil-Spec and most other lowers receivers Enhanced cam-pin optimized for side charge upper with Melonite coating is included Charging handle cover keeping operating gasses in (also important for suppressed fire). Weight: 13.0 oz. Dimensions: 8.9 x 2.9 x 2.9 in Made in the USA NOTE: Must use the G4 Enhanced Cam Pin (included)- use of standard cam pin will cause BCG to lock up and cause potential damage.
Další...
Horní přijímač Gibbz Arms G4 Side Charging je horní přijímač s bočním nabíjením, který není reciprokující a má zádržku udržující páku nabíjení vpředu během provozu. Používá všechny standardní vojenské specifikace (mil-spec) a většinu vlastních nosičů závěru bez úprav. Horní přijímač Gibbz Arms G4 Side Charging nabízí zvětšený vyhazovací otvor a je kompatibilní s kalibry AR-15 od 22LR po 50 Beowulf. Vykosený vyhazovací otvor Plná 15 slotová Picatinny lišta Dveře nosiče závěru vzadu pro snadné odstranění nosiče závěru a odvádění plynů během provozu (důležité pro tlumenou střelbu). Kompatibilní s Mil-Spec a většinou ostatních spodních přijímačů Vylepšený závěrový kolík optimalizovaný pro horní přijímač s bočním nabíjením s Melonitovou povrchovou úpravou je součástí balení Krytka páky nabíjení udržující provozní plyny uvnitř (také důležité pro tlumenou střelbu). Hmotnost: 13.0 oz. Rozměry: 8.9 x 2.9 x 2.9 palce Vyrobeno v USA POZNÁMKA: Musí se použít vylepšený závěrový kolík G4 (součást balení) - použití standardního závěrového kolíku způsobí zamknutí BCG a potenciální poškození.
Další...
Hodnocení zákazníků pro položku GIBBZ ARMS G4 SIDE CHARGING UPPER RECEIVER
Počet hodnocení: 12
Od brownells.com: 12
Průměrné hodnocení: 4,6
The perfect AR charging system(8.8.2014)
I was looking for a non proprietary side charging system for my AR that didn't require me to modify my bolt carrier. I also didn't want to have the handle flying back and forth as the bolt cycled. This setup gave me exactly what I was looking for. This is one of my favorite AR uppers. I actually own two.... If you are going to use a scope on your AR and want a setup that works flawlessly, this is it. If you are looking for an upper with a dust cover or forward assist...keep looking.
The way the AR15 should have been built.(28.2.2015)
As Uppers go not cheap. However very well made and very well engineered means flawless function, even with a Caldwell Brass Catcher mounted to it.
The only potential negatives are no forward assist or dust cover. However if you keep your rifle clean you really won't ever need a forward assist and I've always felt the dust cover was basically "eye candy".
BTW, combine it with a Gibbz handguard and you will have to look long and hard to find a system that allows the barrel to be mounted and torqued with more ease. Screw on the handguard adapter, line up the notch for the gas tube with a drill bit or gage, clamp the Handguard Adapter in a padded vice, and then torque the barrel nut using the Gibbz tool, a crowfoot and torque wrench. At no point do you have to actually clamp the Upper, all the force is applied to the barrel nut and Handguard Adapter. Unfortunately, Brownell's doesn't carry the Gibbz Arms Handguards at this point so you have to order direct but that is Brownell's loss.
Neatness (10.7.2015)
Ok this is great for a scoped rifle while laying prone.
If your rail buts up even to your upper then this will work if. If it has any prongs it wont work.
I used a JP tube hanguard, Larue scope mount and Magpul UBR stock. Love it.
One complaint would be its a little heavy. I would think they could lighten it.
Also one neat feature is the spring loaded trap door for removing the bcg. Also the gas tube port appears to be threaded in maybe for a piston bushing?
Ignore my previous review(18.8.2015)
My previous comment was a novice mistake. The bolt catch will engage. I have requested my old review be removed.
I have had this upper for about a month now and have been struggling with the Adams gas block. I originally intended to use a standard hand guard but In order for the rifle to cycle properly the piston must be spaced 0.015"-0.025" from the gas block when the bolt is closed. With the bracket provided by the Adams gas block system in place this specification cannot be met (the gap is over 0.025") and the action short strokes . I was forced to use a free float hand guard and now it works flawlessly. Since I tried 2 different barrels from different manufacturers with same result I feel the problem is with the Gibbz upper being a bit to long.
ONE OF THE BEST UPDATES FOR AN AR15(18.8.2015)
THIS UPPER IS IDEAL FOR ANY OPTICS THAT EXTEND OVER THE CHARGE HANDLE AREA. MAKES CHARGING AND CLEARING THE WEAPON A ONE HANDED JOB. IT ALIGNS SMOOTHLY WITH THE YHM SLANT HAND GUARD MOUNTED. THE TOLERANCES ARE VERY TIGHT, WHICH IS A PLUS,BUT BE PREPARED TO HAVE TO TAP THE BARREL TO GET IT TO SEAT.
used for 3 gun build(31.8.2015)
I purchased this to use for building a rifle for 3 gun.
I installed a Samson handguard to it, it required fitting of the handguard tabs between the upper and the handguard. These are anti rotation tabs.
I put a Criterion barrel on it and that fit very well.
The upper to lower fit was tight. I used a tactical machining lower that I got off a prize table.
When you charge the upper, a slide comes back with the charging handle. This hit my lower receiver where you screw in the buffer buttstock tube. I had to either file down the lower or the charging slide. I relieved a little bit on the charging slide. I don't think it affected the functioning at all.
I added a JP LMOS bolt carrier which works great.
I practiced a little with it and then shot the rocky mountain 3 gun match...about 200 rifle rounds, then the noveske 3 gun match....about 125 rounds. It is holding up great and I had no malfunctions with it.
The brass does make a mark on the rear of the ejection port cutout, since there is no brass deflector on this thing.
I also noticed it kicks the shells to about my 5 oclock. But this could also be attributed to my gas system.
I would buy another one.
I used a magpul BADD lever and this allows me to rack the bolt and lock it to the rear with one hand.
Great Design - All AR-15 Purposes(2.12.2015)
I've build twenty one AR-15s with left side charge. Fifteen utilizing the Gibbz left charge receiver with my choice of bolt carrier. Six with the excellent ASA left charge that includes their proprietary bolt carrier. Both fine products.
~ Bob, Houston Collection
Cool design but bad machining(20.1.2016)
The design of the Gibbz side charger is nice but the threading for the barrel nut and the tactical rail was way out of spec on the unit I received.
great upper(18.11.2016)
Put this upper on a SBR with a 10.5" barrel. Looks great. I never used a forward assist in the Marines, and the dust cover is a waste of materiel. Over a thousand break in rounds and no malfunctions. My only problem was putting the barrel nut on. I turned a barrel clamp on a lathe and went that route. Overall I think it's a great unit, runs good, looks good. If you want to step out of the normal AR scene pick one up.
I don't build off anything else(10.7.2017)
This is the perfect AR upper I even built one off the 308 platform that everyone wants when I go to the range. The + & - of the system is the proprietary cam pin and if you are building a piston upper Gibbs site offers a brass piston fitting for the upper and you can also order an extra cam pin, I highly recommend doing both of these things. I have built about 50 ARs with this upper and I have yet to get one back or have anyone not satisfied. This action is exceptionally smooth I have never needed the forward assist. You get that billet smooth look, with the potential for a very light gun and I have never had extraction problems because the ejection port is so big. The only 2 draw backs are the charging handle is a bit short so at times you hit your knuckles on the scope mount (Gibbs now makes a comp handle on there site) and you need a Geissele rod to install the barrel but this is just another excuse to get another tool, there is also a Brownells version of that tool on this site. To sum it up for the money you can't best this upper, I don't have to waist money on a way to expensive Charing handle and on mag changes my cheek weld stays intact this gives me faster fallow up shots. Highly recommended and with Brownells lifetime guarantee it's a no brainer.
First off I have nothing bad to say about this upper. Gibbzs makes some really great quality gun parts. As this is my first side charger upper build, I was impressed with the quality and functionality of the charger along with the fit and finish. Feels natural to charge from the side rather than from the rear. I had no problems mounting the barrel with the Mil Spec "D" Ring and 2 piece drop in handguard. I like the ability to keep my hand by the trigger, my eye on the target and be able to charge the rifle without hitting my face. This side charger should be the new normal on all AR rifles. I have some future builds and I know I am going to change some to the Gibbz side charger. I was so proud of my purchase I decided to paint it in Multicam. You get your moneys worth on this one guys so don't hesitate or have any worries, its a great buy.
Help a kontakt
(0) 
Novinky
Klasické zobrazení
Mobilní zobrazení