Košík je prázdný.

Košík

M & A PARTS
AR-15/M16 FLATTOP SCOPE MOUNT

553000005

Integrated Mount & Rings For Rugged Strength

One-piece mount provides strong, secure scope attachment that withstands the bumps and knocks of hard tactical use. Positions scope well above flattop receiver for easy heads-up aiming. Each ring is 11/8" long for maximum contact with scope body, and caps have four hex head clamping screws for recoil-proof holding power. Two, steel, thumb screws and full-length clamping bar securely lock mount to Picatinny receiver rail. Rounded contours and radiused edges resist snagging on other gear. Machined aluminum keeps weight to a minimum.

SPECS: Aluminum, hardcoat anodized, black, matte finish. 5-1⁄8" (13cm) O.A.L.. Height measured from top of rail to bottom of ring. 1” - 1.18” (2.99cm) high, 10.7 oz. (303g) weight.

Další...

Integrovaný montážní systém a kroužky pro robustní pevnost

Jednodílný montážní systém poskytuje silné a bezpečné uchycení zaměřovače, které vydrží nárazy a otřesy při taktickém nasazení. Umožňuje snadné míření s hlavou vztyčenou nad horní částí přijímače. Každý kroužek je dlouhý 11/8" pro maximální kontakt s tělem zaměřovače, a víčka mají čtyři šrouby s šestihrannou hlavou pro odolnost proti zpětnému rázu. Dva ocelové palcové šrouby a celoplošná svěrka pevně zajišťují montáž k Picatinny liště přijímače. Zakulacené kontury a zaoblené hrany zabraňují zachycení o jiné vybavení. Obráběný hliník minimalizuje hmotnost.

SPECS: Hliník, tvrdě eloxovaný, černý, matný povrch. Celková délka 5-1⁄8" (13cm). Výška měřená od horní části lišty po spodní část kroužku. 1” - výška 1.18” (2.99cm), váha 10.7 oz. (303g).

Další...

Hodnocení zákazníků pro položku M & A PARTS FLATTOP SCOPE MOUNT, 1"

Počet hodnocení: 15
Od brownells.com: 15
Průměrné hodnocení: 4,7

One Heavy Duty Mount (16.4.2010)

This mount is a very heavy duty, well made mount. It seems to center very well on my flattop rail. I installed the mount, put the scope in place and checked it for zero with a boresighter. Scope was within 1 MOA of center. That's much better than some of the mounts I have seen for more than twice the price.
The only Con is that it is a bit heavy. If it wasn't for that I would have given it 5 stars.

Really good mount (25.1.2011)

Just got this mount for an AR build that I was doing. This mount is very stout and return to zero is very good too. I painted mine with some of the Brownells bake on laquers. Very good quality product to mount your optics.

Nice mount (15.11.2011)

If you are going to be taking your scope off a lot, this is the mount for you. The one piece construction ensures that it on target with minimal adjustment.

PRECISION! (4.8.2012)

Used this to mount my 10x MilDot scope on my DPMS LR308. Carefully tightened the screws and took it to the range. The first shot at 50 yds was an inch high and two to the right! Well made, stays tight, high quality. You can pay more but you're not getting a better mount, in my opinion. Very happy.

The best deal in an AR mount. USA Made* (27.3.2015)

I am a best bang for the buck guy. I don't pay more than I have to ever and then again quality is never a trade off when buying a piece of equipment that your life may count on some day. Well, this mount is NOT EXPENSIVE and it is BUILT LIKE A TANK. It securely mounts to my AR and I can not find one flaw. Someone may mention it's weight but it is aluminum and extremely durable. So, if you don't want to pay $200.00 for a mount that is no better this this one save the $140.00 and buy another gadget or take your girlfriend/wife out for the night.

Seriously, to pay any more for a known name, in this case, is just dumb.

I like it (3.8.2009)

Use this mount with a 6-18X scope on an AR-15 flattop rifle. Once setup with the scope, the mount/scope is easily removed/installed with minimal/no shift in zero. The setup is very rigid, but weighs more than some other mounts.

Rigid Mount (10.9.2009)

I placed this on my Rock River Arms LAR-8 using a Trijicon TR20-2. Though it is heavy I like how the scope is rock solid. No re-zeroing required.

Mmm... Beefy! (14.11.2009)

This scope mount is rock solid. On my flat-top AR15, the scope holds its zero when removed and re-installed. The only drawback (and the only reason I didn't give a perfect score) is that the scope mount is a little heavy.

Great mount for the money. (16.7.2010)

[...]. It is well made of aircraft grade aluminum and I did not find it heavy like other reviewers. The forward cant of the front ring made it easy to adjust my DMS-1 scope for eye relief and bore sight it on my M4 flattop carbine. The sight picture cleared the front sight with no problem.I took it to the range today, got the rifle on target and was making MOA groups at 100 yards after 6 round sight-in.This is an excellent mount for the money and I just can't see spending 2 or 3 times as much after using this one.[...]

Fast and solid (19.7.2010)

I got mine when I bought a scope from a friend and it had the mount on it already. I liked it before I even put it on the rifle. While a bit bulky, it is rock solid and very easy to install or remove without tools. I have a rock river arms 308 flatop and a bushmaster match V. Both deserve a very good scope and I use one scope between the two because of this mount will easily move between the two flatops.

Best bang for buck hands down (1.10.2011)

10.7 ounces this thing weighs, thats about 3-4 ounces more than ones that cost 4x as much. I have this on my AR15 with a nikon m223 scope. I couldnt be happier. Its a semi quick detach-- I can get the scope off in about 4 seconds. I have taken off many times to clean rifle put it back on and gone shooting with no adjustment- it really holds zero. For those of you wanting a solid mount on a budget there really is no other coice. This thing works very very well, with one drawback- 1/4 pound heavier than top name brand models that run [$] Might consider the nikon m223 mount, but it costs twice as much and has no QD.

a little fat but cute (7.7.2012)

I like this mount - it holds a Kahles on my Del-Ton upper quite securely, but is very heavy.
For the price, though, it is an excellent choice.

I would by this product again. (23.11.2012)

Mounted this on my M&P 15 with Nikon scope worked out great and was very well made, their was no interference with front sight. Plus half the price as others with only one conection to top rather then bying two peice mount system.

Tough - Strong Scope Mount (6.1.2014)

This is an extremely strong 1" scope mount for a flat top receiver. Can be placed anywhere on the top. I like the height, my cheek weld meets to provide a straight in shot at the scope. I put this on a .264 LBC because I wanted something that would take a little more 'bump' and still withstand the roughness driving around 'dog towns' in a four wheel drive cart. Works very well for what I intended it for.

PRODUCT REVIEW (24.3.2014)

INSTALLED ONE TODAY ON AN AR-15 PIC-RAIL FLATTOP. INSTALL WAS SUPER EASY. MOUNTING RINGS REQUIRED NO LAPPING TO BETTER FIT SCOPE TUBE. RUGGED CONSTRUCTION, WELL MADE, & SHOULD BE VERY HARD TO DAMAGE IN NORMAL OR TACTICAL USE. CANNOT FIND ANYTHING TO FAULT !!!!!

Přečtete si další hodnocení na webu brownells.com

0 0 1 CZK

Produkt č.: 553000005
M & A PARTS FLATTOP SCOPE MOUNT, 1"
Číslo výrobce: NONE Jednodílný montážní systém poskytuje silné a bezpečné uchycení zaměřovače, které vydrží nárazy a otřesy při taktickém nasazení. Umožňuje snadné míření s hlavou vztyčenou nad horní částí přijímače. Každý kroužek je dlouhý 11/8" pro maximální kontakt s tělem zaměřovače, a víčka mají čtyři šrouby s šestihrannou hlavou pro odolnost proti zpětnému rázu. Dva ocelové palcové šrouby a celoplošná svěrka pevně zajišťují montáž k Picatinny liště přijímače. Zakulacené kontury a zaoblené hrany zabraňují zachycení o jiné vybavení. Obráběný hliník minimalizuje hmotnost.

Upozornit na dostupnost

Neznáma dostupnost

Vlastnosti: Finish: Black Height: 1.18'' Make: AR-15 Scope Tube Diameter: 1'' Style: Flat Top

Vložit do nákupního seznamu

Zeptejte se

Podrobnosti

Vložit do nákupního seznamu

Zeptejte se

Top takeaways

Jednodílný montážní systém zajišťuje pevné uchycení zaměřovače na Picatinny liště, odolné proti nárazům a otřesům.
Kroužky jsou dlouhé 1 1/8" pro maximální kontakt, se čtyřmi šrouby s šestihrannou hlavou pro odolnost proti zpětnému rázu.
Vyrobeno z obráběného hliníku s tvrdě eloxovaným černým matným povrchem, celková délka 5 1/8", výška 1.18", váha 10.7 oz.

Atributy

Finish: Black Height: 1.18'' Scope Tube Diameter: 1'' Style: Flat Top Udělat: AR-15 Dodací hmotnost: 0,295kg Výška přepravy: 28mm Šířka přepravy: 84mm Délka přepravy: 147mm

Detail produktů

Made in USA

Silná a bezpečná montáž pro AR-15 zaměřovače od M & A PARTS. Lehký hliník, odolný proti nárazům a otřesům. Snadné míření s hlavou vztyčenou. 🌟🔫 Naučte se více!

Integrated Mount & Rings For Rugged Strength

SPECS: Aluminum, hardcoat anodized, black, matte finish. 5-1⁄8" (13cm) O.A.L.. Height measured from top of rail to bottom of ring. 1” - 1.18” (2.99cm) high, 10.7 oz. (303g) weight.

Další...

Integrovaný montážní systém a kroužky pro robustní pevnost

Další...

Hodnocení zákazníků pro položku M & A PARTS FLATTOP SCOPE MOUNT, 1"

Počet hodnocení: 15
Od brownells.com: 15
Průměrné hodnocení: 4,7

One Heavy Duty Mount (16.4.2010)

Really good mount (25.1.2011)

Nice mount (15.11.2011)

If you are going to be taking your scope off a lot, this is the mount for you. The one piece construction ensures that it on target with minimal adjustment.

PRECISION! (4.8.2012)

The best deal in an AR mount. USA Made* (27.3.2015)

I like it (3.8.2009)

Rigid Mount (10.9.2009)

I placed this on my Rock River Arms LAR-8 using a Trijicon TR20-2. Though it is heavy I like how the scope is rock solid. No re-zeroing required.

Mmm... Beefy! (14.11.2009)

Great mount for the money. (16.7.2010)

Fast and solid (19.7.2010)

Best bang for buck hands down (1.10.2011)

a little fat but cute (7.7.2012)

I like this mount - it holds a Kahles on my Del-Ton upper quite securely, but is very heavy.
For the price, though, it is an excellent choice.

I would by this product again. (23.11.2012)

Tough - Strong Scope Mount (6.1.2014)

PRODUCT REVIEW (24.3.2014)

Přečtete si další hodnocení na webu brownells.com

Doporučené produkty
Alternativní produkty

BROWNELLS ALLEN HEAD FIXED-BLADE SCREWDRIVER SET
ALLEN HEAD FIXED-BLADE SCREWDRIVERS

BROWNELLS

Skladem

2 949,00 Kč * 549,00 Kč - 2 949,00 Kč*

Šroubováky jednotlivě | Sady s pevnou čepelí

BROWNELLS GUNSMITH PROFESSIONAL PUNCH SET
GUNSMITH PROFESSIONAL PUNCH SET

BROWNELLS

Předbjednávka

2 499,00 Kč *

Průbojníky

BROWNELLS ROLL PIN PUNCH KIT
ROLL PIN PUNCHES

BROWNELLS

Předbjednávka

1 699,00 Kč * 389,00 Kč - 1 699,00 Kč*

Průbojníky

3,4

J P ENTERPRISES JP FLATTOP SCOPE MOUNT, 1"/30MM
AR-15/M16 FLATTOP OPTIC MOUNT

J P ENTERPRISES

Skladem

13 599,00 Kč *

Montáže-sady

Přihlášení

Zapomněli jste heslo?
Zaregistrovat se

Sociální média

Facebook

Mapa stránky

Produktové Kategorie

Objednávaní

Zákaznícký servis

Společnost Brownells je předním světovým dodavatelem zbrojních nástrojů, dílů střelných zbraní a jejich příslušenství, která je na trhu již více než 75 let. S důvěrou se na nás obrací laická i odborná veřejnost.

Internetový obchod Vám nabízí více než 52 000 produktů, ze kterých si vybere i ten nejnáročnější uživatel.

Vaše spokojenost je pro nás velmi důležitá. Proto se snažíme neustále rozšiřovat portfolio produktů. Může se stát, že se zbožím nebudete spokojeni, můžete ho kdykoliv vrátit a dostanete od nás zpět plnou částku nebo nový produkt v uvedené hodnotě.

Chceme být zárukou Vaší spokojenosti!

cf-web-badges-e-ltgray