Steel bolt catch features an enlarged lower portion that makes it easy to lock bolt to the rear. Enlarged upper portion allows fast bolt release, and “Diamond Texture” thumb pad gives positive engagement and enhances rifle’s appearance.
Umožňuje snadné zajištění a rychlé uvolnění závěru
Ocelový záchyt závěru má zvětšenou dolní část, která usnadňuje zajištění závěru vzadu. Zvětšená horní část umožňuje rychlé uvolnění závěru a „Diamond Texture“ thumb pad zajišťuje pozitivní uchopení a zlepšuje vzhled pušky.
Atributy
Typ zbraně:AR-15
Dodací hmotnost:0,045kg
Výška přepravy:25mm
Šířka přepravy:69mm
Délka přepravy:198mm
UPC:811452029613
Detail produktů
Made in USA
US exportní klasifikace: 0A501.x
Recenze zákazníků
Hodnocení zákazníků (9)
2,9 / 5
Nedoporučuji
Bent and locked up my 9mm carbine 30.7.2018
I've run a few of these before without issue, but on the FIRST time I ran my 9mm carbine to slide-lock it bent this piece and locked up my PCC HARD. I had to use a screwdriver and a hammer to bend it back enough to tap it down. I could then slide my bolt forward and begin to repair. I had been using a box-stock factory bolt catch without issue prior to this. Not an upgrade and too soft. The one I had on my HD rifle is now coming off as well and replaced with something hardened.
Moc nedoporučuji
No go 22.12.2016
Love the feel of this catch, couldn't care about looks. I wanted a larger paddle and In return the bolt won't lock up on the last round. Happened after two months. I don't feel you should have to remove the paddle to clean it inside of 10000 rounds. And I find it funny that the stock catch never wore down on my service rifle.
Best uses..."target practice" only because this will make you one. Save your money and go stock!
Rozhodně doporučuji
Great upgrade 17.3.2016
After my first carbine class I went in search of a bolt catch that had an enlarged bottom portion for locking the bolt open.
I found the Seekins and gave it a try. It worked perfectly and was exactly what I was looking for. Since then I've installed them in three other lowers and have had no problems with fit or function.
I've installed them in lowers from BCM, Spikes Tactical, and PSA.
Moc nedoporučuji
Didn't work for me 2.2.2015
I've build around 11 ARs using Aero, Spikes, DPMS, Bushmaster and other lowers for myself and a few friends. I've always used the bolt catch from DPMS or CMMG lpk. On my last AR build (Aero lower) for myself I decided to put this item in for a more enhanced bolt catch. I wanted one bigger in both the catch and release areas.
Installation was like any bolt catch. It moved freely without the mag and it locked the bolt without the mag but when the mag came into play, it never locked itself. It seemed like it had problems moving, it felt tight with the mag in the mag well.
It looks good, good material, nice wide surface on both ends but not in spec.
Nedoporučuji
Out of Spec Hole Diameter 23.11.2014
I bought one of these about a year ago for the AR 15 that I was building and it worked perfectly. I decided to buy two more for my other AR's but they are both defective. The hole diameter is too small and they will not work freely. The hole diameter is the same size as the roll pin when it should be slightly larger. When I compared the hole sizes to the old bolt catch their is a very noticeable difference. I am guessing that they ran a whole batch of these with the wrong hole size and from the other review that I read Seekins Precision does not QA their parts! I think they need to remove the name "Precision" from their name since they say they make MIL SPEC parts when their parts aren't!
Moc nedoporučuji
Out of spec 24.9.2014
I have tried two of the Seekins enhanced bolt catch on different builds without success.
The first one would not lock the bolt open after firing the last round from several different magazines, and would not hold the bolt back even when manually locked back.
The second one I ordered would not fit into the receiver at all. It was a Seekins forged lower that I was building up. I measured both the lower and the bolt catch and the bolt catch was slightly oversized to the point that it would not fit.
I really like the design of the larger paddle, but they need to get their specs correct on this part.
Rozhodně doporučuji
Easy Install, Easy Upgrade: Faster Bolt 21.6.2014
Used for a RRA Entry Tactical Duty Rifle. This simple upgrade makes it faster & easier to lock back and release the BCG. No Qualms Here Buy It! you wont regret it!
Doporučuji
Will NOT work in Mega Side-Charging Upr 21.6.2014
While this is a lovely bolt catch, it will NOT work in a Mega Arms Side-Charging Upper. There is not enough material milled out of the upper for this bolt catch to fit.
Doporučuji
Big upgrade over the stock part 20.5.2014
I was drawn to this part because I found the bottom portion of a standard bolt catch to be inadequate when locking the bolt open. The enlarged and protruded bottom portion of this part solved that problem for me. It is machined well and of high quality. The only reason I did not give it 5 stars is because it is incompatible with the Magpul BAD lever or any equivalent device that attaches to a standard bolt release. This may or may not matter to you.
Získejte AR-15/M16 Enhanced Bolt Catch od SEEKINS PRECISION! 🔧 Usnadněte zamykání šroubu a vylepšete vzhled vaší pušky.
Prohlášení o kontrole do destinace: "Tyto položky jsou kontrolovány vládou Spojených států a jsou povoleny na vývoz pouze do země konečného určení k použití konečným příjemcem nebo konečným uživatelem (uživatel,), kteří jsou zde identifikováni. Nesmějí být dále prodány, přepraveny ani jinak zlikvidovány v žádné jiné zemi nebo jiné osobě, než je oprávněn konečný příjemce nebo koncový uživatel, a to buď v jejich původní formě nebo po začlenění do jiných položek, aniž by nejprve získali souhlas od vlády USA nebo byly jinak povoleny."
This item is controlled by the U.S. government and authorized for export only to the country of ultimate destination for use by the ultimate consignee or end-user(s) herein identified. It may not be resold, transferred, or otherwise disposed of, to any other country or to any person other than the authorized ultimate consignee or end-user(s), either in their original form or after being incorporated into other items, without first obtaining approval from the U.S. government or as otherwise authorized by U.S. law and regulations.
Prohlášení o kontrole do destinace: "Tyto položky jsou kontrolovány vládou Spojených států a jsou povoleny na vývoz pouze do země konečného určení k použití konečným příjemcem nebo konečným uživatelem (uživatel,), kteří jsou zde identifikováni. Nesmějí být dále prodány, přepraveny ani jinak zlikvidovány v žádné jiné zemi nebo jiné osobě, než je oprávněn konečný příjemce nebo koncový uživatel, a to buď v jejich původní formě nebo po začlenění do jiných položek, aniž by nejprve získali souhlas od vlády USA nebo byly jinak povoleny."
This item is controlled by the U.S. government and authorized for export only to the country of ultimate destination for use by the ultimate consignee or end-user(s) herein identified. It may not be resold, transferred, or otherwise disposed of, to any other country or to any person other than the authorized ultimate consignee or end-user(s), either in their original form or after being incorporated into other items, without first obtaining approval from the U.S. government or as otherwise authorized by U.S. law and regulations.
Obráběné hliníkové tlačítko s „Diamond Texture“ pro pevný kontakt palce a snadné vysunutí zásobníku.
Vhodné pro všechny spodní části pažby mil-spec k nahrazení továrního tlačítka pro uvolnění zásobníku.
Vyrobeno z hliníkové slitiny 6061 T6 s povrchovou úpravou hardcoat anodizací, matně černé.
Navrženo pro použití se všemi Hand Guards a Forends kompatibilními s M-LOK, poskytuje snadnou montáž doplňků s Picatinny specifikací 1913.
Vyrobeno z zesíleného polymerového kompozitu pro zvýšenou pevnost a odolnost při zachování nízké hmotnosti.
Obsahuje veškerý potřebný hardware pro připevnění do slotů M-LOK na hliníkových nebo polymerových hand guards a forends.
FAST™ Riser Absolute poskytuje optickou osu ve výšce 2.26 palce od lišty, což umožňuje rychlejší zaměření při použití s nočním viděním nebo ochrannými maskami.
Montáže FAST™ podporují postoj s hlavou nahoře, což zlepšuje vizuální zpracování bitevního pole.
Vyrobeno z 7075 T6 hliníku s III. typem tvrdé anodizace, montáž na lištu pomocí 2 transverzálních šroubů, hmotnost 2.8 oz.
Zvětšený profil spoušťové ochrany AR-15 umožňuje použití rukavic v chladném počasí nebo při taktických operacích.
Ochrana spouště zachovává původní funkci sklopení pro použití s těžšími rukavicemi, ale vyžaduje odstranění nebo přišroubování zajišťovacího šroubu.