Cycle loads with ease using this military-style charging handle assembly, complete and ready to drop-in any mil-spec upper receiver. Precision machined from rugged, yet lightweight 6061 T6 aluminum, then hardcoat anodized for a wear-resistant surface that adds strength. A final, Teflon® coating provides a slick, self-lubricating finish for exceptionally smooth operation.
S tímto vojenským typem montážní páky pro nabíjení můžete snadno cyklovat náboje. Kompletní a připravený k okamžité instalaci do jakéhokoli mil-spec horního přijímače. Přesně obráběný z odolného, ale lehkého hliníku 6061 T6, poté tvrdě eloxovaný pro odolný povrch, který zvyšuje pevnost. Závěrečná Teflon® povrchová úprava poskytuje hladký, samo-mazací finiš pro výjimečně hladký chod.
SPECS: 6061 T6 hliník, tvrdě eloxovaný, matně černý. 67⁄8" (17.5cm) dlouhý. Vhodný pro mil-spec AR-15/M16 horní přijímače.
Další...
Hodnocení zákazníků pro položku DOUBLE STAR CHARGING HANDLE ASSEMBLY
Počet hodnocení: 12
Od brownells.com: 12
Průměrné hodnocení: 1,8
you get what you pay for(27.8.2010)
i bought this just so i could get my gun together and after charging the weapon about 50 times the metal wore down to the point where the charging handle was binding the good thing about it was the price thats about it
Good price(19.4.2011)
It does the job and for a great price
Nice charging handle(12.5.2011)
Fit is good. Love the Double Star logo. A great value.
Too flexible(18.10.2013)
This functions to charge a weapon, but will not last. It flexes a lot and the latch has a sharp point to it that has already worn a groove in the receiver after just a few uses. I will be returning this one.
low quality control(2.11.2013)
Out of 4 , 2 were normal and worked 2 needed modifications (fitment and filing messing up the black paint) to fit and work properly...
Not compatible(21.11.2013)
This item is profiled incorrectly to fit the notch in an Aero Precision upper receiver and as such, the latch's finger does not reach the recess in the upper receiver to retain it after charging. It requires much filing and that weakens the latch where there's not much metal to start with.
no problems(25.1.2014)
a little loose with bolt open in my colt AR but fits snug with charging handle in firing position, makes the weapon operate as it should with no issues
not so hot(1.12.2014)
This is made of 6061 aluminum, it sucks and is weak. I wish I had realized that when I ordered it. IT BINDS up the bolt carrier group, and it is already noticeably dented in the front lip (under the hole) AFTER ONLY 10 charges with my rifle.
Get one that is made of 7075 aluminum.
It came as part of a kit, but I'll try to return it.
Buyer Beware!(18.6.2016)
Not mil-spec material, seems to be aluminum as a steel bolt carrier destroys the charging handle. I normally would not give a 1 star review, but this CH simply does not even work. My experience was when charging the bolt, the flimsy CH was marred by the bolt carrier enough that the front lip slipped up and bound itself the top of the inside of the upper....keeping the bolt carrier from being able to be charged. My suggestion...don't skimp on an item that has to do with the functionality of the rifle. Buy the Vltor with enhanced latch for a little more money. You likely that you won't have to send this garbage back as I did.
[CAUTION](1.9.2016)
Not mil-spec material, seems to be aluminum as a steel bolt carrier destroys the charging handle. My experience was when charging the bolt, the flimsy CH was marred by the bolt carrier enough that the front lip slipped up and bound itself the top of the inside of the upper....keeping the bolt carrier from being able to be charged. My suggestion...don't skimp on an item that has to do with the functionality of the rifle. Buy one with a bit higher grade metal; preferably steel.
Pure Junk(3.12.2016)
I installed this into my newly built AR 15 and it started jamming right away. This Handle almost jammed, so bad we could almost not even get the bolt back out of the Upper Receiver. I would stay have far away from this handle. Spend a little more and save our money and hands from getting pinched trying to get it to work right.
Binding up from the start(21.2.2017)
Bought this for a ground up build. Didn't do my homework and regretted it. From the start it was binding up. Swapped it out with a milspec unit and the problem disappeared.
Produkt č.: 100004996 DOUBLE STAR CHARGING HANDLE ASSEMBLY Číslo výrobce: AR460841348103851 S tímto vojenským typem montážní páky pro nabíjení můžete snadno cyklovat náboje. Kompletní a připravený k okamžité instalaci do jakéhokoli mil-spec horního přijímače. Přesně obráběný z odolného, ale lehkého hliníku 6061 T6, poté tvrdě eloxovaný pro odolný povrch, který zvyšuje pevnost. Závěrečná Teflon® povrchová úprava poskytuje hladký, samo-mazací finiš pro výjimečně hladký chod.
Montážní páka pro nabíjení AR-15/M16 je vyrobena z odolného hliníku 6061 T6 a má tvrdě eloxovaný povrch pro zvýšenou pevnost.
Povrchová úprava Teflon® poskytuje hladký, samo-mazací finiš pro výjimečně hladký chod.
Kompatibilní s mil-spec horními přijímači a připravený k okamžité instalaci.
Atributy
Finish:
Matte Black
Hand:
Right
Udělat:
AR-15
Dodací hmotnost: 0,068kgVýška přepravy: 38mmŠířka přepravy: 124mmDélka přepravy: 251mm
UPC
: 841348103851
Detail produktů
Made in USA
US exportní klasifikace: 0A501.x
Prohlášení o kontrole do destinace: "Tyto položky jsou kontrolovány vládou Spojených států a jsou povoleny na vývoz pouze do země konečného určení k použití konečným příjemcem nebo konečným uživatelem (uživatel,), kteří jsou zde identifikováni. Nesmějí být dále prodány, přepraveny ani jinak zlikvidovány v žádné jiné zemi nebo jiné osobě, než je oprávněn konečný příjemce nebo koncový uživatel, a to buď v jejich původní formě nebo po začlenění do jiných položek, aniž by nejprve získali souhlas od vlády USA nebo byly jinak povoleny."
This item is controlled by the U.S. government and authorized for export only to the country of ultimate destination for use by the ultimate consignee or end-user(s) herein identified. It may not be resold, transferred, or otherwise disposed of, to any other country or to any person other than the authorized ultimate consignee or end-user(s), either in their original form or after being incorporated into other items, without first obtaining approval from the U.S. government or as otherwise authorized by U.S. law and regulations.
Získejte AR-15/M16 nabíjecí rukojeť od DOUBLE STAR! 💪 Odolný hliník 6061 T6, matně černý povrch a snadná instalace do mil-spec přijímačů.
Cycle loads with ease using this military-style charging handle assembly, complete and ready to drop-in any mil-spec upper receiver. Precision machined from rugged, yet lightweight 6061 T6 aluminum, then hardcoat anodized for a wear-resistant surface that adds strength. A final, Teflon® coating provides a slick, self-lubricating finish for exceptionally smooth operation.
S tímto vojenským typem montážní páky pro nabíjení můžete snadno cyklovat náboje. Kompletní a připravený k okamžité instalaci do jakéhokoli mil-spec horního přijímače. Přesně obráběný z odolného, ale lehkého hliníku 6061 T6, poté tvrdě eloxovaný pro odolný povrch, který zvyšuje pevnost. Závěrečná Teflon® povrchová úprava poskytuje hladký, samo-mazací finiš pro výjimečně hladký chod.
SPECS: 6061 T6 hliník, tvrdě eloxovaný, matně černý. 67⁄8" (17.5cm) dlouhý. Vhodný pro mil-spec AR-15/M16 horní přijímače.
Další...
Hodnocení zákazníků pro položku DOUBLE STAR CHARGING HANDLE ASSEMBLY
Počet hodnocení: 12
Od brownells.com: 12
Průměrné hodnocení: 1,8
you get what you pay for(27.8.2010)
i bought this just so i could get my gun together and after charging the weapon about 50 times the metal wore down to the point where the charging handle was binding the good thing about it was the price thats about it
Good price(19.4.2011)
It does the job and for a great price
Nice charging handle(12.5.2011)
Fit is good. Love the Double Star logo. A great value.
Too flexible(18.10.2013)
This functions to charge a weapon, but will not last. It flexes a lot and the latch has a sharp point to it that has already worn a groove in the receiver after just a few uses. I will be returning this one.
low quality control(2.11.2013)
Out of 4 , 2 were normal and worked 2 needed modifications (fitment and filing messing up the black paint) to fit and work properly...
Not compatible(21.11.2013)
This item is profiled incorrectly to fit the notch in an Aero Precision upper receiver and as such, the latch's finger does not reach the recess in the upper receiver to retain it after charging. It requires much filing and that weakens the latch where there's not much metal to start with.
no problems(25.1.2014)
a little loose with bolt open in my colt AR but fits snug with charging handle in firing position, makes the weapon operate as it should with no issues
not so hot(1.12.2014)
This is made of 6061 aluminum, it sucks and is weak. I wish I had realized that when I ordered it. IT BINDS up the bolt carrier group, and it is already noticeably dented in the front lip (under the hole) AFTER ONLY 10 charges with my rifle.
Get one that is made of 7075 aluminum.
It came as part of a kit, but I'll try to return it.
Buyer Beware!(18.6.2016)
Not mil-spec material, seems to be aluminum as a steel bolt carrier destroys the charging handle. I normally would not give a 1 star review, but this CH simply does not even work. My experience was when charging the bolt, the flimsy CH was marred by the bolt carrier enough that the front lip slipped up and bound itself the top of the inside of the upper....keeping the bolt carrier from being able to be charged. My suggestion...don't skimp on an item that has to do with the functionality of the rifle. Buy the Vltor with enhanced latch for a little more money. You likely that you won't have to send this garbage back as I did.
[CAUTION](1.9.2016)
Not mil-spec material, seems to be aluminum as a steel bolt carrier destroys the charging handle. My experience was when charging the bolt, the flimsy CH was marred by the bolt carrier enough that the front lip slipped up and bound itself the top of the inside of the upper....keeping the bolt carrier from being able to be charged. My suggestion...don't skimp on an item that has to do with the functionality of the rifle. Buy one with a bit higher grade metal; preferably steel.
Pure Junk(3.12.2016)
I installed this into my newly built AR 15 and it started jamming right away. This Handle almost jammed, so bad we could almost not even get the bolt back out of the Upper Receiver. I would stay have far away from this handle. Spend a little more and save our money and hands from getting pinched trying to get it to work right.
Binding up from the start(21.2.2017)
Bought this for a ground up build. Didn't do my homework and regretted it. From the start it was binding up. Swapped it out with a milspec unit and the problem disappeared.
Help a kontakt
(0) 
Novinky
Klasické zobrazení
Mobilní zobrazení