Positive, One-Handed Operation For Both Right & Left Handed Shooters
Machined aluminum charging handle drops in to standard AR-15 receivers to give positive operation for right and left handed shooters. Built with thicker dimensions than standard charging handles to withstand wear and rough use. Large diameter coiled spring pin absorbs shock and flexes so it won’t fail under extreme conditions. Broad contact points make traditional and tactical weapon manipulation easy, and grooved surfaces help weapon retention and assist positive charging operation while wearing gloves. Battle Latch Charging Handle Assembly fits AR-15s and is designed for right handed shooters. Ambidextrous Battle Latch Charging Handle fits AR-15s and gives true ambidextrous function.
SPECS: 6061-T6 aluminum, Mil-spec type III hardcoat anodized, matte black finish.
Další...
Spolehlivé ovládání jednou rukou pro praváky i leváky
Obráběná hliníková páka závěru se snadno montuje do standardních přijímačů AR-15 a zajišťuje spolehlivé ovládání pro praváky i leváky. Je vyrobena s většími rozměry než standardní páky závěru, aby vydržela opotřebení a hrubé zacházení. Velký průměr vinuté pružiny pohlcuje šoky a ohebnost zabraňuje selhání i v extrémních podmínkách. Široké kontaktní body usnadňují tradiční a taktickou manipulaci se zbraní a rýhované povrchy pomáhají udržet zbraň a podporují spolehlivé nabíjení i při nošení rukavic. Sestava páky závěru Battle Latch je určena pro AR-15 a je navržena pro praváky. Ambidextrní páka závěru Battle Latch je vhodná pro AR-15 a umožňuje skutečně oboustranné použití.
SPECS: Hliník 6061-T6, Mil-spec typ III tvrdě eloxovaný, matně černý povrch.
Počet hodnocení: 7
Od brownells.com: 7
Průměrné hodnocení: 4,9
My favorite charging handle for sure!(18.6.2012)
I have tried alot of CH's and I think I have found my favorite.. I have been using it ambi and non ambi, very cool to adapt left or right side depending on the situation at hand. Can't forget to mention how sturdy this handle is! I will be putting this thing to use very much. Will be also purchasing the EBRv2 very soon.
Solid Product(24.7.2012)
Outstanding product for us Lefty-operators out there...very solid product. A bit pricey, but that is par for the course with decent U.S. made tactical accessories these days.
Excellent!(31.8.2012)
Unlike some other brands which are only ambi when the gun is in the firing position, this one is truly ambi no matter what state the gun is in. When combined with the BAD lever or Phase 5 EBR, you have a fast, ambi system. It does increase the profile of your gun and give more edges to hang up on though. Yet, I run a Magpul ASAP and single point sling and have had no problems. It is has a more extended area to aide in positively grabbing the handle, so this is a necessary trade off. Another point is that left handed, you cannot simply pull the charge handle back with one finger of your right hand but must squeeze the extended lever between your thumb and knuckle or thumb and finger. This is natural and actually more secure than one finger, but you must practice this technique. Also, the unit is very sturdy and well made. I highly recommend for both lefties and those realizing the need to be able to quickly clear malfunctions while shooting weak handed.
Great tool(17.9.2012)
This handle works great. It has a solid feel and works with either hand. Great for the ar with sights and other additions to the upper rail area. Great positive lock
Awesome charging handle!(28.1.2013)
Awesome charging handle. Well built, looks good, and functional. I highly recommend.
Quality(6.4.2013)
32 Year Law Enforcement veteran, still active, firearms and rifle instructor, armorer. That said... This is a quality piece, mil-spec, works superbly in a dpms upper. Strong, Ambi-dextrous function unsurpassed. Extremely impressed with Phase 5. Side Note about Brownells? Ordered 4-3, normal shipping, received 4-5. FANTASTIC JOB, Brownells.
Great Ambi Charging Handle(29.6.2013)
I specifically ordered this charging lever from Brownells to review for my blog fans and followers. Up to this point, I had owned many different types of charging levers, but never an ambidextrous one. I had looked briefly at the Rainier Arms Raptor, but I liked the look and style of the Phase 5 Tactical lever. I decided to order this and use it to finish up my VLTOR 300 Blackout build. I wanted an ambidextrous charging lever that I could use no matter which position I or the rifle could end up in.
Once the charging lever arrived, I was surprised at how thick and beefy it really was. Pictures do not do this lever a justice! It is made very well and has a super solid construction. The interior walls are thicker than my BCM Gunfighter charging lever and the angles and cuts are crisp and precise. The shaft of the lever is proudly marked with Phase 5 Tactical's website address and rightfully so! The lever itself has excellent ridges which create maximum grip and manipulation of the handle, even with moist or dirty hands. The lever is large enough to get a full grip with the tradition charging style method (two finger contact), but is not overly big like some of the competitors out there.
Of course it is ambidextrous and has a matching right side to the left, with the actual ambidextrous part being located at the very end of the lever. It is long enough that it extends to the other side of the lever grip and also has very crisp ridges for grip and manipulation. But here is the reason why I could only give 4 stars. Although the lever absolutely serves it purpose as being ambidextrous, the extension at the end is simply too long and with too many edges. This unfortunately gets easily caught in my gear, plate carrier and other items I have worn during use.
Although it is made very rigid, the very nature of the extension could be easily broken off in extreme situations. It hasn't broken on me yet, but it has gotten stuck in most of my gear on many different occasions, including competitive matches. I think that if Phase 5 could trim it up a bit, shorten it and tone down the ridges, it would work wonderfully. I am still partial to my BCM charging lever, but it doesn't have the ambi capability like the Phase 5 lever.
A huge plus for me about this lever is that it is proudly made in the USA! Not that common anymore, but it seems Phase 5 is doing it right! All in all, I am VERY impressed with this lever and plan to use it for years to come. If the current configuration of this charging handle isn't good enough for you, don't forget that Phase 5 offers a larger and beefier "Battle Latch" extension. I would highly recommend this latch to anyone looking for an ambi handle or for any of you lefties out there. Great product and great American owned and operated company! Get one, you'll love it!
Produkt č.: 100009955 PHASE 5 TACTICAL AMBI CHARGING HANDLE ASSEMBLY Číslo výrobce: ABL/CHA813318020017 Obráběná hliníková páka závěru se snadno montuje do standardních přijímačů AR-15 a zajišťuje spolehlivé ovládání pro praváky i leváky. Je vyrobena s většími rozměry než standardní páky závěru, aby vydržela opotřebení a hrubé zacházení. Velký průměr vinuté pružiny pohlcuje šoky a ohebnost zabraňuje selhání i v extrémních podmínkách. Široké kontaktní body usnadňují tradiční a taktickou manipulaci se zbraní a rýhované povrchy pomáhají udržet zbraň a podporují spolehlivé nabíjení i při nošení rukavic. Sestava páky závěru Battle Latch je určena pro AR-15 a je navržena pro praváky. Ambidextrní páka závěru Battle Latch je vhodná pro AR-15 a umožňuje skutečně oboustranné použití.
2949CZK22 949,00 Kč
*
Dodací lhůta je přibližně 14-21 dní. 2 Počet ks. skladem USA
Made in USA
US exportní klasifikace: 0A501.x
Prohlášení o kontrole do destinace: "Tyto položky jsou kontrolovány vládou Spojených států a jsou povoleny na vývoz pouze do země konečného určení k použití konečným příjemcem nebo konečným uživatelem (uživatel,), kteří jsou zde identifikováni. Nesmějí být dále prodány, přepraveny ani jinak zlikvidovány v žádné jiné zemi nebo jiné osobě, než je oprávněn konečný příjemce nebo koncový uživatel, a to buď v jejich původní formě nebo po začlenění do jiných položek, aniž by nejprve získali souhlas od vlády USA nebo byly jinak povoleny."
This item is controlled by the U.S. government and authorized for export only to the country of ultimate destination for use by the ultimate consignee or end-user(s) herein identified. It may not be resold, transferred, or otherwise disposed of, to any other country or to any person other than the authorized ultimate consignee or end-user(s), either in their original form or after being incorporated into other items, without first obtaining approval from the U.S. government or as otherwise authorized by U.S. law and regulations.
Objevte ambidextrní nabíjecí rukojeť AR-15 od Phase 5 Tactical. 🛠️ Snadná montáž a spolehlivá manipulace pro praváky i leváky!
Positive, One-Handed Operation For Both Right & Left Handed Shooters
Machined aluminum charging handle drops in to standard AR-15 receivers to give positive operation for right and left handed shooters. Built with thicker dimensions than standard charging handles to withstand wear and rough use. Large diameter coiled spring pin absorbs shock and flexes so it won’t fail under extreme conditions. Broad contact points make traditional and tactical weapon manipulation easy, and grooved surfaces help weapon retention and assist positive charging operation while wearing gloves. Battle Latch Charging Handle Assembly fits AR-15s and is designed for right handed shooters. Ambidextrous Battle Latch Charging Handle fits AR-15s and gives true ambidextrous function.
SPECS: 6061-T6 aluminum, Mil-spec type III hardcoat anodized, matte black finish.
Další...
Spolehlivé ovládání jednou rukou pro praváky i leváky
Obráběná hliníková páka závěru se snadno montuje do standardních přijímačů AR-15 a zajišťuje spolehlivé ovládání pro praváky i leváky. Je vyrobena s většími rozměry než standardní páky závěru, aby vydržela opotřebení a hrubé zacházení. Velký průměr vinuté pružiny pohlcuje šoky a ohebnost zabraňuje selhání i v extrémních podmínkách. Široké kontaktní body usnadňují tradiční a taktickou manipulaci se zbraní a rýhované povrchy pomáhají udržet zbraň a podporují spolehlivé nabíjení i při nošení rukavic. Sestava páky závěru Battle Latch je určena pro AR-15 a je navržena pro praváky. Ambidextrní páka závěru Battle Latch je vhodná pro AR-15 a umožňuje skutečně oboustranné použití.
SPECS: Hliník 6061-T6, Mil-spec typ III tvrdě eloxovaný, matně černý povrch.
Počet hodnocení: 7
Od brownells.com: 7
Průměrné hodnocení: 4,9
My favorite charging handle for sure!(18.6.2012)
I have tried alot of CH's and I think I have found my favorite.. I have been using it ambi and non ambi, very cool to adapt left or right side depending on the situation at hand. Can't forget to mention how sturdy this handle is! I will be putting this thing to use very much. Will be also purchasing the EBRv2 very soon.
Solid Product(24.7.2012)
Outstanding product for us Lefty-operators out there...very solid product. A bit pricey, but that is par for the course with decent U.S. made tactical accessories these days.
Excellent!(31.8.2012)
Unlike some other brands which are only ambi when the gun is in the firing position, this one is truly ambi no matter what state the gun is in. When combined with the BAD lever or Phase 5 EBR, you have a fast, ambi system. It does increase the profile of your gun and give more edges to hang up on though. Yet, I run a Magpul ASAP and single point sling and have had no problems. It is has a more extended area to aide in positively grabbing the handle, so this is a necessary trade off. Another point is that left handed, you cannot simply pull the charge handle back with one finger of your right hand but must squeeze the extended lever between your thumb and knuckle or thumb and finger. This is natural and actually more secure than one finger, but you must practice this technique. Also, the unit is very sturdy and well made. I highly recommend for both lefties and those realizing the need to be able to quickly clear malfunctions while shooting weak handed.
Great tool(17.9.2012)
This handle works great. It has a solid feel and works with either hand. Great for the ar with sights and other additions to the upper rail area. Great positive lock
Awesome charging handle!(28.1.2013)
Awesome charging handle. Well built, looks good, and functional. I highly recommend.
Quality(6.4.2013)
32 Year Law Enforcement veteran, still active, firearms and rifle instructor, armorer. That said... This is a quality piece, mil-spec, works superbly in a dpms upper. Strong, Ambi-dextrous function unsurpassed. Extremely impressed with Phase 5. Side Note about Brownells? Ordered 4-3, normal shipping, received 4-5. FANTASTIC JOB, Brownells.
Great Ambi Charging Handle(29.6.2013)
I specifically ordered this charging lever from Brownells to review for my blog fans and followers. Up to this point, I had owned many different types of charging levers, but never an ambidextrous one. I had looked briefly at the Rainier Arms Raptor, but I liked the look and style of the Phase 5 Tactical lever. I decided to order this and use it to finish up my VLTOR 300 Blackout build. I wanted an ambidextrous charging lever that I could use no matter which position I or the rifle could end up in.
Once the charging lever arrived, I was surprised at how thick and beefy it really was. Pictures do not do this lever a justice! It is made very well and has a super solid construction. The interior walls are thicker than my BCM Gunfighter charging lever and the angles and cuts are crisp and precise. The shaft of the lever is proudly marked with Phase 5 Tactical's website address and rightfully so! The lever itself has excellent ridges which create maximum grip and manipulation of the handle, even with moist or dirty hands. The lever is large enough to get a full grip with the tradition charging style method (two finger contact), but is not overly big like some of the competitors out there.
Of course it is ambidextrous and has a matching right side to the left, with the actual ambidextrous part being located at the very end of the lever. It is long enough that it extends to the other side of the lever grip and also has very crisp ridges for grip and manipulation. But here is the reason why I could only give 4 stars. Although the lever absolutely serves it purpose as being ambidextrous, the extension at the end is simply too long and with too many edges. This unfortunately gets easily caught in my gear, plate carrier and other items I have worn during use.
Although it is made very rigid, the very nature of the extension could be easily broken off in extreme situations. It hasn't broken on me yet, but it has gotten stuck in most of my gear on many different occasions, including competitive matches. I think that if Phase 5 could trim it up a bit, shorten it and tone down the ridges, it would work wonderfully. I am still partial to my BCM charging lever, but it doesn't have the ambi capability like the Phase 5 lever.
A huge plus for me about this lever is that it is proudly made in the USA! Not that common anymore, but it seems Phase 5 is doing it right! All in all, I am VERY impressed with this lever and plan to use it for years to come. If the current configuration of this charging handle isn't good enough for you, don't forget that Phase 5 offers a larger and beefier "Battle Latch" extension. I would highly recommend this latch to anyone looking for an ambi handle or for any of you lefties out there. Great product and great American owned and operated company! Get one, you'll love it!
Help a kontakt
(0) 
Novinky
Klasické zobrazení
Mobilní zobrazení