Low-profile adapter gives an AR-15/M16 with an A2-style buttstock the convenience and versatility of single-point clip-on sling/mash-hook/H&K sling mounting attachment. Precision machined from 4140 carbon steel for extra strength, with extra metal on the attachment loop, so no matter how hard you pull or twist the sling, this adapter won’t break. Right Hand (RH) model has the loop on the left side to accommodate right-handed shooters; Left Hand (LH) model has the loop on the right for left-handed shooters. Requires no permanent alterations to rifle: simply remove the buttstock, slide the adapter over the receiver extension tube, and reinstall the stock using the included spacer and extended buttplate screw.
SPECS: 4140 steel, black oxide finish
Další...
Nízkoprofilový adaptér poskytuje AR-15/M16 se zadní pažbou typu A2 pohodlí a univerzálnost uchycení popruhu na jednom bodě pomocí klipu/mash-hook/H&K. Precizně obráběný z uhlíkové oceli 4140 pro extra pevnost, s dodatečným materiálem na poutku, takže bez ohledu na to, jak silně popruh táhnete nebo točíte, tento adaptér se nezlomí. Model pro praváky (RH) má poutko na levé straně pro pohodlné uchycení praváky; model pro leváky (LH) má poutko na pravé straně. Nevyžaduje žádné trvalé úpravy pušky: stačí sundat pažbu, nasunout adaptér na trubku prodloužení přijímače a znovu nainstalovat pažbu s použitím dodané mezery a prodlouženého šroubu na pažbu.
TECHNICKÉ ÚDAJE: 4140 ocel, černá oxidová úprava
Další...
Hodnocení zákazníků pro položku BROWNELLS A2 SINGLE-POINT ADAPTER LEFT HAND
Počet hodnocení: 7
Od brownells.com: 7
Průměrné hodnocení: 4,7
Seems solid, nice addition(19.8.2010)
Seems solid, not completely flush with the sides of the stock, but close enough. I ended up not using the extended screw, as mine seemed to screw in fine with the original.
this thing rocks(10.10.2011)
perfect fit on my DPMS sweet sixteen A2 stock.
Quality Machined Sling Mount(6.9.2013)
I was pleasantly surprised upon receiving my Brownells AR single point sling mount.
This is the real deal! Thick solid steel construction that was thoughtfully engineered to look great and work perfectly.
I mounted this on my A2 style AR15, which is an Oly Arms MPR, and it now looks like the sling mount was OEM from the factory. The finish matches the metal upper receiver very well.
Very easy installation, no interference with the charging handle and I'm glad I ordered this product.
This is not the cheap aluminum mounts that are sold and in time, DO NOT hold up.
I feel confident that this mount will last the life of the rifle.
good kit(3.1.2014)
kit includes everything you need for an a1 or a2 standard stock.
Fits a Bushmaster rifle perfectly.(19.1.2016)
Lets face it there are very few single point adapter plates out there for AR15a2 rifles and even fewer that are quality made. I bought this hoping it would fit a Magpul paraclip, the clip fits but has limited freedom of movement. If the hole was another 1/8" to 1/4" in diameter it would be just perfect. I installed on my Bushmaster and it fit perfectly.
Great POA(15.9.2016)
The adapter looks very well made and sturdy, just the same as the other reviews state. The only thing I would change about it is not with the adapter but with the hardware. I installed mine on an olympic arms lower and the included spacer on mine kept rattling around some. I had to make a shim out of a 1/2" flat washer. It took some time but I was able to get it to just the right tolerances that it would hold both the spacer and the adapter tight on the butt stock. With the slight variances in tolerance from rifle to rifle, that is to be expected and I do not fault Brownells at all. Maybe they could include a couple other spacers that differ by a few hundredths of an inch in length. I would have paid $5 more just for that convenience. Otherwise, excellent product and highly recommend!
installation(28.6.2018)
the kit assumes you are altering a carbine buffer tube. Instructions refer to the extra spacer that one would need when installing an A2 fixed stock on a carbine rifle(16" buffer tube is shorter).... I installed this on standard 20 inch rifle buffer tube. Unfortunately, the screw that was included in the kit was too long for the rifle buffer tube and will only work if you're modifying a carbine model with a carbine buffer tube and needed a spacer to install A2 stock... fortunately, I was able to use the existing screw and reinstall the stock, but would like one a little shorter than the one provided( or an extra screw for that option) to accommodate standard rifle buffer tube. I might have to cut the screw provided order to get maximum threads... even though only adds up 5/16 of an inch... would like to have that extra threads in stock that holds it all together.
Produkt č.: 080000658 BROWNELLS A2 SINGLE-POINT ADAPTER LEFT HAND Nízkoprofilový adaptér poskytuje AR-15/M16 se zadní pažbou typu A2 pohodlí a univerzálnost uchycení popruhu na jednom bodě pomocí klipu/mash-hook/H&K. Precizně obráběný z uhlíkové oceli 4140 pro extra pevnost, s dodatečným materiálem na poutku, takže bez ohledu na to, jak silně popruh táhnete nebo točíte, tento adaptér se nezlomí. Model pro praváky (RH) má poutko na levé straně pro pohodlné uchycení praváky; model pro leváky (LH) má poutko na pravé straně. Nevyžaduje žádné trvalé úpravy pušky: stačí sundat pažbu, nasunout adaptér na trubku prodloužení přijímače a znovu nainstalovat pažbu s použitím dodané mezery a prodlouženého šroubu na pažbu.
1699CZK11 699,00 Kč
*
Dodací lhůta je přibližně 1-2 dní. 1 Počet ks. na místním skladě
Adaptér poskytuje AR-15/M16 se zadní pažbou typu A2 pohodlí a univerzálnost uchycení popruhu na jednom bodě pomocí klipu/mash-hook/H&K.
Vyroben z uhlíkové oceli 4140 pro extra pevnost, s dodatečným materiálem na poutku, takže se nezlomí ani při silném tahu nebo točení popruhu.
Instalace nevyžaduje trvalé úpravy pušky: stačí sundat pažbu, nasunout adaptér na trubku prodloužení přijímače a znovu nainstalovat pažbu s použitím dodané mezery a prodlouženého šroubu na pažbu.
Atributy
Color:
Black
Style:
Adaptér na poutko
Dodací hmotnost: 0,023kgVýška přepravy: 15mmŠířka přepravy: 89mmDélka přepravy: 155mm
Detail produktů
Made in USA
Produkt č.: 080000687 BROWNELLS A2 SINGLE-POINT ADAPTER RIGHT HAND Nízkoprofilový adaptér poskytuje AR-15/M16 se zadní pažbou typu A2 pohodlí a univerzálnost uchycení popruhu na jednom bodě pomocí klipu/mash-hook/H&K. Precizně obráběný z uhlíkové oceli 4140 pro extra pevnost, s dodatečným materiálem na poutku, takže bez ohledu na to, jak silně popruh táhnete nebo točíte, tento adaptér se nezlomí. Model pro praváky (RH) má poutko na levé straně pro pohodlné uchycení praváky; model pro leváky (LH) má poutko na pravé straně. Nevyžaduje žádné trvalé úpravy pušky: stačí sundat pažbu, nasunout adaptér na trubku prodloužení přijímače a znovu nainstalovat pažbu s použitím dodané mezery a prodlouženého šroubu na pažbu.
Nízkoprofilový adaptér poskytuje AR-15/M16 se zadní pažbou typu A2 pohodlí a univerzálnost uchycení popruhu na jednom bodě pomocí klipu/mash-hook/H&K.
Vyroben z uhlíkové oceli 4140 pro extra pevnost a s dodatečným materiálem na poutku, který zajišťuje odolnost proti zlomení.
Instalace nevyžaduje trvalé úpravy pušky; stačí sundat pažbu, nasunout adaptér a znovu nainstalovat pažbu s použitím dodané mezery a prodlouženého šroubu.
Atributy
Color:
Black
Style:
Adaptér na poutko
Dodací hmotnost: 0,045kgVýška přepravy: 13mmŠířka přepravy: 64mmDélka přepravy: 147mm
Detail produktů
Made in USA
Získejte AR-15/M16 A2 Single-Point Sling Adapter pro pohodlné uchycení popruhu. 💪 Pevný a univerzální adaptér od BROWNELLS!
Low-profile adapter gives an AR-15/M16 with an A2-style buttstock the convenience and versatility of single-point clip-on sling/mash-hook/H&K sling mounting attachment. Precision machined from 4140 carbon steel for extra strength, with extra metal on the attachment loop, so no matter how hard you pull or twist the sling, this adapter won’t break. Right Hand (RH) model has the loop on the left side to accommodate right-handed shooters; Left Hand (LH) model has the loop on the right for left-handed shooters. Requires no permanent alterations to rifle: simply remove the buttstock, slide the adapter over the receiver extension tube, and reinstall the stock using the included spacer and extended buttplate screw.
SPECS: 4140 steel, black oxide finish
Další...
Nízkoprofilový adaptér poskytuje AR-15/M16 se zadní pažbou typu A2 pohodlí a univerzálnost uchycení popruhu na jednom bodě pomocí klipu/mash-hook/H&K. Precizně obráběný z uhlíkové oceli 4140 pro extra pevnost, s dodatečným materiálem na poutku, takže bez ohledu na to, jak silně popruh táhnete nebo točíte, tento adaptér se nezlomí. Model pro praváky (RH) má poutko na levé straně pro pohodlné uchycení praváky; model pro leváky (LH) má poutko na pravé straně. Nevyžaduje žádné trvalé úpravy pušky: stačí sundat pažbu, nasunout adaptér na trubku prodloužení přijímače a znovu nainstalovat pažbu s použitím dodané mezery a prodlouženého šroubu na pažbu.
TECHNICKÉ ÚDAJE: 4140 ocel, černá oxidová úprava
Další...
Hodnocení zákazníků pro položku BROWNELLS A2 SINGLE-POINT ADAPTER LEFT HAND
Počet hodnocení: 7
Od brownells.com: 7
Průměrné hodnocení: 4,7
Seems solid, nice addition(19.8.2010)
Seems solid, not completely flush with the sides of the stock, but close enough. I ended up not using the extended screw, as mine seemed to screw in fine with the original.
this thing rocks(10.10.2011)
perfect fit on my DPMS sweet sixteen A2 stock.
Quality Machined Sling Mount(6.9.2013)
I was pleasantly surprised upon receiving my Brownells AR single point sling mount.
This is the real deal! Thick solid steel construction that was thoughtfully engineered to look great and work perfectly.
I mounted this on my A2 style AR15, which is an Oly Arms MPR, and it now looks like the sling mount was OEM from the factory. The finish matches the metal upper receiver very well.
Very easy installation, no interference with the charging handle and I'm glad I ordered this product.
This is not the cheap aluminum mounts that are sold and in time, DO NOT hold up.
I feel confident that this mount will last the life of the rifle.
good kit(3.1.2014)
kit includes everything you need for an a1 or a2 standard stock.
Fits a Bushmaster rifle perfectly.(19.1.2016)
Lets face it there are very few single point adapter plates out there for AR15a2 rifles and even fewer that are quality made. I bought this hoping it would fit a Magpul paraclip, the clip fits but has limited freedom of movement. If the hole was another 1/8" to 1/4" in diameter it would be just perfect. I installed on my Bushmaster and it fit perfectly.
Great POA(15.9.2016)
The adapter looks very well made and sturdy, just the same as the other reviews state. The only thing I would change about it is not with the adapter but with the hardware. I installed mine on an olympic arms lower and the included spacer on mine kept rattling around some. I had to make a shim out of a 1/2" flat washer. It took some time but I was able to get it to just the right tolerances that it would hold both the spacer and the adapter tight on the butt stock. With the slight variances in tolerance from rifle to rifle, that is to be expected and I do not fault Brownells at all. Maybe they could include a couple other spacers that differ by a few hundredths of an inch in length. I would have paid $5 more just for that convenience. Otherwise, excellent product and highly recommend!
installation(28.6.2018)
the kit assumes you are altering a carbine buffer tube. Instructions refer to the extra spacer that one would need when installing an A2 fixed stock on a carbine rifle(16" buffer tube is shorter).... I installed this on standard 20 inch rifle buffer tube. Unfortunately, the screw that was included in the kit was too long for the rifle buffer tube and will only work if you're modifying a carbine model with a carbine buffer tube and needed a spacer to install A2 stock... fortunately, I was able to use the existing screw and reinstall the stock, but would like one a little shorter than the one provided( or an extra screw for that option) to accommodate standard rifle buffer tube. I might have to cut the screw provided order to get maximum threads... even though only adds up 5/16 of an inch... would like to have that extra threads in stock that holds it all together.