Won't Interfere With Extended-Length Tactical Forearms
Minimal-profile replacement for factory front sight/gas block won t interfere with extended-length tactical forearms, while ensuring proper function of gas system for reliable cycling. Protrudes only .420" above barrel, covers less than 1" of barrel length, and adds only 1.4 oz. of weight. Compatible with M4-style carbines and M16A2/A3/A4-style rifles with any length, .750" O.D. barrel. Two steel setscrews keep the block securely anchored to the barrel to prevent shifting even under the force of full-auto recoil. Black oxide finish matches most factory barrel finishes.
SPECS: Carbon steel, oxide finish, matte black. .950 (24mm) long. 1.375 (3.5cm) overall height. 1.4 oz. (41g) weight. Fits AR-15/M16 with .750 O.D. barrel at gas block mounting position. Includes hex-head setscrews.
Další...
Nebude zasahovat do taktických předpažbí prodloužené délky
Náhradní plynový blok s minimálním profilem pro tovární přední mířidlo nebudou nijak zasahovat do taktických předpažbí prodloužené délky, zároveň zajistí správnou funkci plynového systému pro spolehlivé cyklování. Vyčnívá pouze .420" nad hlaveň, pokrývá méně než 1" délky hlavně a přidává pouze 1.4 oz. hmotnosti. Kompatibilní s karabinami M4 a puškami M16A2/A3/A4 s jakoukoliv délkou hlavně a průměrem .750" O.D. Dva ocelové zajišťovací šrouby pevně udržují blok na hlavni, aby se předešlo posunu i při síle zpětného rázu v plně automatickém režimu. Černý oxidovaný povrch ladí s většinou továrních povrchů hlavní.
SPECIFIKACE: Uhlíková ocel, oxidovaný povrch, matně černá. Délka .950 (24mm). Celková výška 1.375 (3.5cm). Hmotnost 1.4 oz. (41g). Pasuje na AR-15/M16 s průměrem hlavně .750 O.D. na pozici montáže plynového bloku. Obsahuje šestihranné zajišťovací šrouby.
Další...
Hodnocení zákazníků pro položku TROY INDUSTRIES AR-15 GAS BLOCK LOW PROFILE .750 STEEL BLACK
Počet hodnocení: 13
Od brownells.com: 13
Průměrné hodnocení: 3,9
Troy Low Profile Gas Block(30.12.2009)
I mounted this on a 16" Daniel Defense barrel.VERY low profile. The install was perfect. The tolerances were exact. Tight fit but slid on easily with no play. After firing there was NO leakage around the gas tube. Could have paid more but could not have gotten a better part.
Looks Great and Works(27.1.2013)
I research a number of gas block and decided on this one. Glad I did. I had a bit of a problem getting it to slide onto my S/S White Oak Wylde barrel, but after a bit of 600 emory it fits nice and looks great sitting just in front of my Hogue Rifle length OverMolded Free Float Tube.
Excellent Block(3.12.2013)
Very lightweight, secure mount, and high quality.
ID too tight!(26.1.2014)
Bought this for my son's first build. ID is too tight and won't even go 1/4 down the barrel. Tried a little grease, tapping with a block, way too tight. Maybe I just was just unlucky, but I'll try another product first.
Junk(30.1.2015)
Too tight. wound up scratching the barrel and bending the gas tube getting this off because it did not fit correctly. Too tight for barrel and gas tube hole too small. Now have to order new gas tube and gas block. Threw it in the garbage. Checked other higher profile gas blocks I had on this barrel and gas tube and they fit no problem.
Priced right, easy to install(20.10.2015)
I bought this, having read about fitment issues. It was too tight to just slip onto two barrels I had handy, so I took a piece of emery cloth and a hand drill to the inside for all of 20 seconds. Even without oil, it fit easily, but not too loosely. I don't think that was a lot of effort, and it seals well to the port. If it needed to be machined, I would give it a different review. For the price, ease of installation, and function, this is a 5-star block.
Easy to install, nice fit(20.12.2015)
I installed the Troy gas block on my Smith & Wesson M&P15i to use with the Hogue forend soon to come from Brownells.
Had no issues whatsoever. Easy to slide on, easy to line up with the gas port. Great value for the money.
The most difficult part I had was punching out the pins holding the A2 front sight.
Here are some measurements that I took, for those of you that are curious:
The gas port hole is between 5.45-8.77mm when measured from one end to the other (from the shoulder). Any barrel with a gas port distance from the shoulder in this range will function (as long as the gas block journal is .750").
Overall height is 34.68mm/1.3655"
Width is 22.91mm/.902"
Length is 24.18mm/.952"
My closest estimate for the set screw distance is 9.75mm/.383". I'm very confident with this number, but it was hard to get an extremely precise measurement.
I put this on a Ballistic Advantage barrel 10.5" and it slid on easily. I have yet to fully install it though.
Fits a Ballistic Advantage Barrel(19.1.2016)
I put this on a 10.5 in Ballistic Advantage barrel BABL556005M and it slid right on. Some people have complained about it being too tight on other barrel brands, so I thought I would share my experience.
Awesome(27.5.2016)
Fit perfectly on my Rock River. Installation was a breeze and rifle cycling like it should. Fits well under small diameter BCM handgaurd
fit fine(25.8.2016)
I installed this on a DPMS barrel that I cerakoted and it fit just fine. it fit snug, just like it is supposed to.
Fits great. (5.10.2016)
Installed on a Criterion barrel with no issues. Everything lined up perfectly.
.004" Smaller than barrel(21.3.2017)
I don't normally use this product...a customer brought it to me to install, including several other parts. It was .004 undersize of the barrel...was not impressed. Will have to heat it to install it...shouldn't have to be that far off. Someone is not checking their machine setup it looks like.
Produkt č.: 100004062 TROY INDUSTRIES AR-15 GAS BLOCK LOW PROFILE .750 STEEL BLACK Číslo výrobce: SGASA4L00BT00812699010136 Náhradní plynový blok s minimálním profilem pro tovární přední mířidlo nebudou nijak zasahovat do taktických předpažbí prodloužené délky, zároveň zajistí správnou funkci plynového systému pro spolehlivé cyklování. Vyčnívá pouze .420" nad hlaveň, pokrývá méně než 1" délky hlavně a přidává pouze 1.4 oz. hmotnosti. Kompatibilní s karabinami M4 a puškami M16A2/A3/A4 s jakoukoliv délkou hlavně a průměrem .750" O.D. Dva ocelové zajišťovací šrouby pevně udržují blok na hlavni, aby se předešlo posunu i při síle zpětného rázu v plně automatickém režimu. Černý oxidovaný povrch ladí s většinou továrních povrchů hlavní.
1599CZK101 599,00 Kč
*
Dodací lhůta je přibližně 14-21 dní. Více než 10 ks. skladem USA
Made in USA
US exportní klasifikace: 0A501.x
Prohlášení o kontrole do destinace: "Tyto položky jsou kontrolovány vládou Spojených států a jsou povoleny na vývoz pouze do země konečného určení k použití konečným příjemcem nebo konečným uživatelem (uživatel,), kteří jsou zde identifikováni. Nesmějí být dále prodány, přepraveny ani jinak zlikvidovány v žádné jiné zemi nebo jiné osobě, než je oprávněn konečný příjemce nebo koncový uživatel, a to buď v jejich původní formě nebo po začlenění do jiných položek, aniž by nejprve získali souhlas od vlády USA nebo byly jinak povoleny."
This item is controlled by the U.S. government and authorized for export only to the country of ultimate destination for use by the ultimate consignee or end-user(s) herein identified. It may not be resold, transferred, or otherwise disposed of, to any other country or to any person other than the authorized ultimate consignee or end-user(s), either in their original form or after being incorporated into other items, without first obtaining approval from the U.S. government or as otherwise authorized by U.S. law and regulations.
Objevte nízkoprofilový plynový blok AR-15 od TROY INDUSTRIES! 🛠️ Zajistí spolehlivou funkci a perfektní kompatibilitu s vaší zbraní.
Won't Interfere With Extended-Length Tactical Forearms
Minimal-profile replacement for factory front sight/gas block won t interfere with extended-length tactical forearms, while ensuring proper function of gas system for reliable cycling. Protrudes only .420" above barrel, covers less than 1" of barrel length, and adds only 1.4 oz. of weight. Compatible with M4-style carbines and M16A2/A3/A4-style rifles with any length, .750" O.D. barrel. Two steel setscrews keep the block securely anchored to the barrel to prevent shifting even under the force of full-auto recoil. Black oxide finish matches most factory barrel finishes.
SPECS: Carbon steel, oxide finish, matte black. .950 (24mm) long. 1.375 (3.5cm) overall height. 1.4 oz. (41g) weight. Fits AR-15/M16 with .750 O.D. barrel at gas block mounting position. Includes hex-head setscrews.
Další...
Nebude zasahovat do taktických předpažbí prodloužené délky
Náhradní plynový blok s minimálním profilem pro tovární přední mířidlo nebudou nijak zasahovat do taktických předpažbí prodloužené délky, zároveň zajistí správnou funkci plynového systému pro spolehlivé cyklování. Vyčnívá pouze .420" nad hlaveň, pokrývá méně než 1" délky hlavně a přidává pouze 1.4 oz. hmotnosti. Kompatibilní s karabinami M4 a puškami M16A2/A3/A4 s jakoukoliv délkou hlavně a průměrem .750" O.D. Dva ocelové zajišťovací šrouby pevně udržují blok na hlavni, aby se předešlo posunu i při síle zpětného rázu v plně automatickém režimu. Černý oxidovaný povrch ladí s většinou továrních povrchů hlavní.
SPECIFIKACE: Uhlíková ocel, oxidovaný povrch, matně černá. Délka .950 (24mm). Celková výška 1.375 (3.5cm). Hmotnost 1.4 oz. (41g). Pasuje na AR-15/M16 s průměrem hlavně .750 O.D. na pozici montáže plynového bloku. Obsahuje šestihranné zajišťovací šrouby.
Další...
Hodnocení zákazníků pro položku TROY INDUSTRIES AR-15 GAS BLOCK LOW PROFILE .750 STEEL BLACK
Počet hodnocení: 13
Od brownells.com: 13
Průměrné hodnocení: 3,9
Troy Low Profile Gas Block(30.12.2009)
I mounted this on a 16" Daniel Defense barrel.VERY low profile. The install was perfect. The tolerances were exact. Tight fit but slid on easily with no play. After firing there was NO leakage around the gas tube. Could have paid more but could not have gotten a better part.
Looks Great and Works(27.1.2013)
I research a number of gas block and decided on this one. Glad I did. I had a bit of a problem getting it to slide onto my S/S White Oak Wylde barrel, but after a bit of 600 emory it fits nice and looks great sitting just in front of my Hogue Rifle length OverMolded Free Float Tube.
Excellent Block(3.12.2013)
Very lightweight, secure mount, and high quality.
ID too tight!(26.1.2014)
Bought this for my son's first build. ID is too tight and won't even go 1/4 down the barrel. Tried a little grease, tapping with a block, way too tight. Maybe I just was just unlucky, but I'll try another product first.
Junk(30.1.2015)
Too tight. wound up scratching the barrel and bending the gas tube getting this off because it did not fit correctly. Too tight for barrel and gas tube hole too small. Now have to order new gas tube and gas block. Threw it in the garbage. Checked other higher profile gas blocks I had on this barrel and gas tube and they fit no problem.
Priced right, easy to install(20.10.2015)
I bought this, having read about fitment issues. It was too tight to just slip onto two barrels I had handy, so I took a piece of emery cloth and a hand drill to the inside for all of 20 seconds. Even without oil, it fit easily, but not too loosely. I don't think that was a lot of effort, and it seals well to the port. If it needed to be machined, I would give it a different review. For the price, ease of installation, and function, this is a 5-star block.
Easy to install, nice fit(20.12.2015)
I installed the Troy gas block on my Smith & Wesson M&P15i to use with the Hogue forend soon to come from Brownells.
Had no issues whatsoever. Easy to slide on, easy to line up with the gas port. Great value for the money.
The most difficult part I had was punching out the pins holding the A2 front sight.
Here are some measurements that I took, for those of you that are curious:
The gas port hole is between 5.45-8.77mm when measured from one end to the other (from the shoulder). Any barrel with a gas port distance from the shoulder in this range will function (as long as the gas block journal is .750").
Overall height is 34.68mm/1.3655"
Width is 22.91mm/.902"
Length is 24.18mm/.952"
My closest estimate for the set screw distance is 9.75mm/.383". I'm very confident with this number, but it was hard to get an extremely precise measurement.
I put this on a Ballistic Advantage barrel 10.5" and it slid on easily. I have yet to fully install it though.
Fits a Ballistic Advantage Barrel(19.1.2016)
I put this on a 10.5 in Ballistic Advantage barrel BABL556005M and it slid right on. Some people have complained about it being too tight on other barrel brands, so I thought I would share my experience.
Awesome(27.5.2016)
Fit perfectly on my Rock River. Installation was a breeze and rifle cycling like it should. Fits well under small diameter BCM handgaurd
fit fine(25.8.2016)
I installed this on a DPMS barrel that I cerakoted and it fit just fine. it fit snug, just like it is supposed to.
Fits great. (5.10.2016)
Installed on a Criterion barrel with no issues. Everything lined up perfectly.
.004" Smaller than barrel(21.3.2017)
I don't normally use this product...a customer brought it to me to install, including several other parts. It was .004 undersize of the barrel...was not impressed. Will have to heat it to install it...shouldn't have to be that far off. Someone is not checking their machine setup it looks like.
Help a kontakt
(0) 
Novinky
Klasické zobrazení
Mobilní zobrazení