Heavy-duty wrench provides plenty of leverage for installing and removing barrel nuts when used with a 3/8" or ½" drive breaker bar, socket wrench, or torque wrench. Cut from 3/8" thick steel, with plenty of metal so it won’t flex under pressure while transferring the torque evenly to the nut. Models available for ArmaLite® AR-10® rifles.
Tento robustní klíč poskytuje dostatečnou páku pro instalaci a odstranění matic hlavně, když se používá s 3/8" nebo ½" ráčnovým klíčem, nástrčným klíčem nebo klíčem na momentové utahování. Vyřezáno z 3/8" silné oceli, s dostatkem materiálu, takže se pod tlakem neohne a rovnoměrně přenese točivý moment na matici. Modely dostupné pro pušky ArmaLite® AR-10®.
SPECS: Ocel 1018, černěný povrch. AR-10 se hodí pouze pro ArmaLite AR-10.
Počet hodnocení: 6
Od brownells.com: 6
Průměrné hodnocení: 4,8
Works only on old style AR-10 barrel nut(26.12.2009)
The newer (A2 and on) AR-10 has a smaller barrel nut that has the outside dimensions of an AR-15 nut. Construction looked good, probably the right tool for the job on the correct rifle.
Note: The PRI AR-15 wrench will not work on the AR-10A2 because the barrel diameter is larger than the AR-15 and the hole in the center of the tool is not large enough to fit. PRI tells me they plan to make a new version of this wrench with pins for both style nuts on either side.
WORKS GREAT!(29.12.2010)
This thing works great. It goes on a little snug. Just a light tapping with a mallet worked well for me. I liked the fact that it went on snug as then the tool would stay put while my hands were off of it. I used a torque wrench to tighten the barrel nut and I had no fear of slipping or breaking. This thing is a WRENCH! It is made of real steel. The reverse side fit my floating hand guard nut as well.
At last!(15.11.2012)
I at last have a barrel nut wernch that works!! I used it on a free float tub nut and it was the best wernch that I have used fit was perfect easy to use great product!!
Works really well.(14.3.2015)
Perfect fit for my AR10. If you purchase this, you need not purchase the free float nut wrench from Armalite. I recommend this PRI part.
Great tool(14.3.2015)
Fit my 20 hole free float barrel nut snug. I like the heavy duty construction and the five extra long pins. Right tool for the right job. Nothing like some of the cheap combination tools.
Well built for the price (9.3.2017)
I installed an Armalite free float tube on my AR-10A with this wrench and it worked as advertised. Very well built for the price. Some reviews are a little miss leading, this will work with a stock barrel nut on the AR-10. Pictured is the wrench fit up to a standard barrel nut I took off the rifle. So no need to buy 2 wrenches to replace an Armalite barrel nut.
Produkt č.: 714000008 PRECISION REFLEX ARMALITE AR-10® BARREL NUT WRENCH Číslo výrobce: 030085090222549821 Tento robustní klíč poskytuje dostatečnou páku pro instalaci a odstranění matic hlavně, když se používá s 3/8" nebo ½" ráčnovým klíčem, nástrčným klíčem nebo klíčem na momentové utahování. Vyřezáno z 3/8" silné oceli, s dostatkem materiálu, takže se pod tlakem neohne a rovnoměrně přenese točivý moment na matici. Modely dostupné pro pušky ArmaLite® AR-10®.
1349CZK01 349,00 Kč
*
Předbjednávka, dodací lhůta je přibližně 4-12 týdny ze skladu z USA.
Heavy-duty wrench provides plenty of leverage for installing and removing barrel nuts when used with a 3/8" or ½" drive breaker bar, socket wrench, or torque wrench. Cut from 3/8" thick steel, with plenty of metal so it won’t flex under pressure while transferring the torque evenly to the nut. Models available for ArmaLite® AR-10® rifles.
Tento robustní klíč poskytuje dostatečnou páku pro instalaci a odstranění matic hlavně, když se používá s 3/8" nebo ½" ráčnovým klíčem, nástrčným klíčem nebo klíčem na momentové utahování. Vyřezáno z 3/8" silné oceli, s dostatkem materiálu, takže se pod tlakem neohne a rovnoměrně přenese točivý moment na matici. Modely dostupné pro pušky ArmaLite® AR-10®.
SPECS: Ocel 1018, černěný povrch. AR-10 se hodí pouze pro ArmaLite AR-10.
Počet hodnocení: 6
Od brownells.com: 6
Průměrné hodnocení: 4,8
Works only on old style AR-10 barrel nut(26.12.2009)
The newer (A2 and on) AR-10 has a smaller barrel nut that has the outside dimensions of an AR-15 nut. Construction looked good, probably the right tool for the job on the correct rifle.
Note: The PRI AR-15 wrench will not work on the AR-10A2 because the barrel diameter is larger than the AR-15 and the hole in the center of the tool is not large enough to fit. PRI tells me they plan to make a new version of this wrench with pins for both style nuts on either side.
WORKS GREAT!(29.12.2010)
This thing works great. It goes on a little snug. Just a light tapping with a mallet worked well for me. I liked the fact that it went on snug as then the tool would stay put while my hands were off of it. I used a torque wrench to tighten the barrel nut and I had no fear of slipping or breaking. This thing is a WRENCH! It is made of real steel. The reverse side fit my floating hand guard nut as well.
At last!(15.11.2012)
I at last have a barrel nut wernch that works!! I used it on a free float tub nut and it was the best wernch that I have used fit was perfect easy to use great product!!
Works really well.(14.3.2015)
Perfect fit for my AR10. If you purchase this, you need not purchase the free float nut wrench from Armalite. I recommend this PRI part.
Great tool(14.3.2015)
Fit my 20 hole free float barrel nut snug. I like the heavy duty construction and the five extra long pins. Right tool for the right job. Nothing like some of the cheap combination tools.
Well built for the price (9.3.2017)
I installed an Armalite free float tube on my AR-10A with this wrench and it worked as advertised. Very well built for the price. Some reviews are a little miss leading, this will work with a stock barrel nut on the AR-10. Pictured is the wrench fit up to a standard barrel nut I took off the rifle. So no need to buy 2 wrenches to replace an Armalite barrel nut.