STRIKE INDUSTRIES
RIFLE AK TO AR BUFFER TUBE ADAPTER

700598350463 100016868

Strike Industries stock adapter allows for the replacement of any standard fixed AK stock to be converted to accept an AR buffer tube assembly. This adapter is easy to install without any modifications to your AK. With no need to permanently alter the stock tang as it fits inside the adapter and tube. This product will take your AK into the twenty first century with the looks and the adjust-ability of a M4. Strike Industries also incorporated QD (quick disconnects) on both sides of the AK stock adapter.

SPECS: Length: 2.5", Weight: 4oz, Material: T6061 Aluminum.

Další...

Adaptér pažby od Strike Industries umožňuje výměnu jakékoli standardní pevné pažby AK za montážní systém AR buffer tube. Tento adaptér je snadno instalovatelný bez jakýchkoli úprav vaší AK. Není potřeba trvale upravovat tang pažby, protože se vejde dovnitř adaptéru a trubky. Tento produkt převede vaše AK do jednadvacátého století s vzhledem a nastavitelností M4. Strike Industries také zahrnul QD (quick disconnects) na obou stranách adaptéru pažby AK.

SPECS: Délka: 2,5", Váha: 4oz, Materiál: T6061 Hliník.

Další...

Hodnocení zákazníků pro položku STRIKE INDUSTRIES AK TO AR BUFFER TUBE ADAPTER BLACK ALUMINUM

Počet hodnocení: 6
Od brownells.com: 5
Průměrné hodnocení: 4

Vynikající jedna z nejlepších (10.10.2019)

Bezchybný výrobek, precizně obrobený. Pasuje naprosto přesně pasuje i do polského Tantalu wz. 88. Buffer tube jde zašroubat bez vůlí v závitu (BCM) a jde zajistit červíkem ani nemusí být matice castle nut.

does not fit (29.5.2015)

Sturdy design, but does not even come close to fitting C39V2 rifle from century

Fits Great - FOR STAMPED AK's ONLY! (3.6.2015)

The review below me tried fitting it on a milled AK (C39v2). The Brownells video states it's for STAMPED AK's only. Fit well on my DDI stamped AK.

Worth getting to modify your AK (5.9.2015)

I received the product 3 days before it was schedule to arrive, so my 'hats off' to Brownells for their speed of processing delivery. The part fit into my Warsa 10/63 lower receiver without any problems. It is made of the same strong material used in a lot of today's AR's, and the location for the QD attachments is where I like them to be. With the stock fully collapsed, it is a half inch shorter than the standard AK stock, fully extended it is as long as an A2 stock for those that like the longer length of pull.

The only 2 issue's I did have was; (1) the lack of a proper fitting allen key tool to set the lock screw for the buffer tube and the two mounting screws, (2) I had to use a sanding wheel to grind down the edge of the mounting screw that went under the recoil spring/ locking latch for the dust cover to get it to fit flush with the surface and have everything mount properly back into place on the receiver. Other than those two minor issues, this is a great product for anyone who wants to mount an AR collapsible butt stock to their AK 47/74 rifle's. I would have given it 5 stars instead of 4, if it was not for having to do a little work when I was installing the part.

So far, so good (25.10.2015)

I researched this item and went back and forth between it and the rifle dynamics version. This one is half price and when "chatting" with the Brownell's rep, he said I could return it if didn't work out. Well, I figured that was worth a try. The unit fit well on my Saiga with some minor fitting of the mounting screw (filing). However, there are no directions and there are two pieces that fit inside the adapter that I truly don't know what their purpose is. That said, it fit well and looks good. I put a Magpul MOE stock on the AK. The length of the stock with the adapter is outstanding. Time will tell as to durability, but so far I'm very happy.

Exellent product, but... (16.2.2018)

Excellent adapter, very well made.

The best if you plan on using the iron sights as the tube comes lower then on any other similar adapters.

Only caveat is that requires quite a LOT of fitting to install on Norinco; the receiver of T56 is made of 1.5 mm steel compared to most East Block AKs where the material is 1 mm â so the inner diameter is smaller then on most models.

Also, the Chinese tang is about 6 mm longer then standard, so the holes do not fit (see the pic â after taking it, I ended up filing the rear tang hole so it aligns with the hole on the adapter)

I filed the sides and the "forehead" of the part of the adapter that goes inside the receiver, and filed the rear tang screw hole some â now it fits tight and very solid, even without the adjustment pieces.

<img width="500" src='/userdocs/reviewimages/c70e0c1a-d3be-4dee-9d83-9353443560d7.jpg' alt=''>

Přečtete si další hodnocení na webu brownells.com

1549 1549 1 CZK

Produkt č.: 100016868
STRIKE INDUSTRIES AK TO AR BUFFER TUBE ADAPTER BLACK ALUMINUM
Číslo výrobce: SI-AK-SA 700598350463 Adaptér pažby od Strike Industries umožňuje výměnu jakékoli standardní pevné pažby AK za montážní systém AR buffer tube. Tento adaptér je snadno instalovatelný bez jakýchkoli úprav vaší AK. Není potřeba trvale upravovat tang pažby, protože se vejde dovnitř adaptéru a trubky. Tento produkt převede vaše AK do jednadvacátého století s vzhledem a nastavitelností M4. Strike Industries také zahrnul QD (quick disconnects) na obou stranách adaptéru pažby AK.

1549 CZK 3 1 549,00 Kč *

Dodací lhůta je přibližně 14-21 dní.
3 Počet ks. skladem USA

Vlastnosti: Finish: Black Material: Aluminum

Vložit do nákupního seznamu

Zeptejte se

Podrobnosti

Vložit do nákupního seznamu

Zeptejte se

Top takeaways

Adaptér pažby od Strike Industries umožňuje výměnu pevné pažby AK za AR buffer tube systém bez nutnosti úprav.
Produkt je vyroben z T6061 hliníku a má černou povrchovou úpravu, délka je 2,5" a váha 4oz.
Obsahuje QD (quick disconnects) na obou stranách pro snadné připojení a odpojení.

Atributy

Finish: Black Material: Aluminum Dodací hmotnost: 0,125kg Výška přepravy: 44mm Šířka přepravy: 44mm Délka přepravy: 70mm UPC : 700598350463