Rugged steel, phosphate-treated magazine stands up to the harsh conditions of combat and competition. Self-lubricating polymer follower and heat-treated, precision-wound spring delivers 20 rounds of ammo reliably and consistently. Steel floorplate easily removes for cleaning. Fits DPMS Panther LR series rifles (.243, .260, .308 caliber), Knight’s Armament SR-25, Remington R-25 (.308), and Stoner SR-25. Will not fit Armalite AR10.
SPECS: Steel, heat treated, black oxide finish, polymer follower, 20-round capacity. 55⁄8 long. Fits DPMS Panther LR series rifles (.243, .260, .308 caliber), Knight SR-25, Remington R-25 (.308), and Stoner SR-25. Does not fit the ArmaLite AR-10, Rock River Arms, or any rifle using an FN/FAL magazine.
Další...
Pasuje do většiny AR-stylových puškových platforem .308
Odolný ocelový, fosfátově ošetřený zásobník odolává náročným podmínkám boje a soutěží. Samomazný polymerový zásobník a tepelně zpracovaná, přesně navinutá pružina zajišťují spolehlivé a konzistentní podávání 20 nábojů. Ocelové dno je snadno demontovatelné pro čištění. Pasuje do pušek DPMS Panther LR série (.243, .260, .308 kalibr), Knight’s Armament SR-25, Remington R-25 (.308) a Stoner SR-25. Nepasuje do Armalite AR10.
SPECIFIKACE: Ocel, tepelně zpracovaná, černý oxidový povrch, polymerový zásobník, kapacita 20 ran. Délka 55⁄8 palců. Pasuje do pušek DPMS Panther LR série (.243, .260, .308 kalibr), Knight SR-25, Remington R-25 (.308) a Stoner SR-25. Neodpovídá ArmaLite AR-10, puškám Rock River Arms ani jakékoli pušce používající zásobník FN/FAL.
Další...
Hodnocení zákazníků pro položku PRO MAG AR .308 MAGAZINE 308 WINCHESTER 20RD STEEL BLACK
Počet hodnocení: 9
Od brownells.com: 9
Průměrné hodnocení: 3
Not Worth the $$(15.5.2013)
I have been in the shooting sport and firearms industry for close to 40 years. I have seen it all in my time. I own a LaRue ONB in 7.62mm, arguably, one of the best semi autos of all time. I ordered 3 of these 20 round magazines on Jan 4. Today, on 5/15/13 I received my order. All 3 magazines won't seat in the receiver without beating them in. The finish is rough as a cob like they were sandblasted with play ground sand. If anyone needs 3 Pro-Mag, DPMS 20round M110 magazines, check the auction sites because these 3 will be somewhere for sale in the next 24 hours.They are not fit for duty.
They work(25.5.2013)
I picked up 5 of these magazines for my 308 AR build only because they were the only magazines I could find (then and now). At first, the spring seemed weak and the bolt would only lock to the rear every other time the magazine was emptied. Now after a couple uses it locks to the rear every time. I've never had a misfeed either. It may be because the magazine seemed to be coated in a pretty heavy coat of grease when I opened the package and that may be finally wearing off, even after cleaning with CLP when I first got them. Overall not a bad magazine but there are definitely better ones out there. I wouldn't trust them in 3 gun competition but for normal range work they are more than fine.
They stick in my LWRC's mag well and jam(12.6.2013)
the followers are too small and tend to give tilt-type jams. By too small I mean teh forward edges tend to pop out over the mag body's retention "tabs".
These are nothing one would count on in a match
Good Mag and in stock(20.6.2013)
Worked fine in my DPMS sportico 308 and they have it in stock !
.308 magazine in m&p 10(15.7.2013)
I use it in my smith and Wesson m&p 10. it works great, does what it says, fits easily in my gun, locks the bolt to the rear after the last shot, haven't had any problems whatsoever, no double feeds or any malfunctions at all. the only reason I did not give this magazine 5 stars is when its fully loaded with rounds it makes this weird rattling sound when moved, that I would prefer it didn't make, other than that ill be buying a lot of these very soon.
OK IN m&p10(18.7.2013)
OK but a little balky in feeding.
Big fan!!!(19.4.2014)
LOVE IT
good mag for the price.(6.3.2017)
I used it at the range and they ran very well. I have a D.P.M.S. LR 308, and if you have one these mags are for you because the D.P.M.S. mags go for 40.00$ ea. One thing to note they take 19 rounds. If you try 20 it will not feed the first round. But with 19 all is well.
Bought 1 to evaluate(4.4.2018)
The magazine is well made with a smooth black phosphate finish. It looks almost OEM. Follower tilts. On a DPMS G2B24, it is a poor fit. Very difficult to insert and almost impossible to remove. Returned.
Produkt č.: 687000069 PRO MAG AR .308 MAGAZINE 308 WINCHESTER 20RD STEEL BLACK Číslo výrobce: DPM-A1708279010149 Odolný ocelový, fosfátově ošetřený zásobník odolává náročným podmínkám boje a soutěží. Samomazný polymerový zásobník a tepelně zpracovaná, přesně navinutá pružina zajišťují spolehlivé a konzistentní podávání 20 nábojů. Ocelové dno je snadno demontovatelné pro čištění. Pasuje do pušek DPMS Panther LR série (.243, .260, .308 kalibr), Knight’s Armament SR-25, Remington R-25 (.308) a Stoner SR-25. Nepasuje do Armalite AR10.
1049CZK01 049,00 Kč
*
Předbjednávka, dodací lhůta je přibližně 4-12 týdny ze skladu z USA.
Vlastnosti:Action Type: Semi-AutoFinish: BlackKapacita: 20-RoundMake: AR .308Material: SteelNáboj: 308 Winchester, 7.62 mm NATOMnožství: 1
Odolný ocelový zásobník s fosfátovým ošetřením a samomazným polymerovým zásobníkem zajišťuje spolehlivé podávání 20 nábojů.
Pasuje do pušek DPMS Panther LR série (.243, .260, .308 kalibr), Knight’s Armament SR-25, Remington R-25 (.308) a Stoner SR-25, ale neodpovídá ArmaLite AR-10.
Snadno demontovatelné ocelové dno umožňuje jednoduché čištění.
Atributy
Action Type:
Semi-Auto
Capacity:
20-Round
Finish:
Black
Material:
Steel
Náboje:
308 Winchester,7.62 mm NATO
Udělat:
AR .308
Dodací hmotnost: 0,272kgVýška přepravy: 10mmŠířka přepravy: 114mmDélka přepravy: 267mm
UPC
: 708279010149
Detail produktů
Made in USA
US exportní klasifikace: 0A501.d
Prohlášení o kontrole do destinace: "Tyto položky jsou kontrolovány vládou Spojených států a jsou povoleny na vývoz pouze do země konečného určení k použití konečným příjemcem nebo konečným uživatelem (uživatel,), kteří jsou zde identifikováni. Nesmějí být dále prodány, přepraveny ani jinak zlikvidovány v žádné jiné zemi nebo jiné osobě, než je oprávněn konečný příjemce nebo koncový uživatel, a to buď v jejich původní formě nebo po začlenění do jiných položek, aniž by nejprve získali souhlas od vlády USA nebo byly jinak povoleny."
This item is controlled by the U.S. government and authorized for export only to the country of ultimate destination for use by the ultimate consignee or end-user(s) herein identified. It may not be resold, transferred, or otherwise disposed of, to any other country or to any person other than the authorized ultimate consignee or end-user(s), either in their original form or after being incorporated into other items, without first obtaining approval from the U.S. government or as otherwise authorized by U.S. law and regulations.
Odpovědný hospodářský subjekt podle nařízení EU
Brownells Arms s.r.o.
Bílanská 1861/81
76701 Kroměříž
Česká republika
info@brownells.cz
Objevte odolný AR .308 20RD MAGAZINE pro spolehlivé podávání 20 nábojů. 💪 Ideální pro pušky DPMS a Remington R-25.
Rugged steel, phosphate-treated magazine stands up to the harsh conditions of combat and competition. Self-lubricating polymer follower and heat-treated, precision-wound spring delivers 20 rounds of ammo reliably and consistently. Steel floorplate easily removes for cleaning. Fits DPMS Panther LR series rifles (.243, .260, .308 caliber), Knight’s Armament SR-25, Remington R-25 (.308), and Stoner SR-25. Will not fit Armalite AR10.
SPECS: Steel, heat treated, black oxide finish, polymer follower, 20-round capacity. 55⁄8 long. Fits DPMS Panther LR series rifles (.243, .260, .308 caliber), Knight SR-25, Remington R-25 (.308), and Stoner SR-25. Does not fit the ArmaLite AR-10, Rock River Arms, or any rifle using an FN/FAL magazine.
Další...
Pasuje do většiny AR-stylových puškových platforem .308
Odolný ocelový, fosfátově ošetřený zásobník odolává náročným podmínkám boje a soutěží. Samomazný polymerový zásobník a tepelně zpracovaná, přesně navinutá pružina zajišťují spolehlivé a konzistentní podávání 20 nábojů. Ocelové dno je snadno demontovatelné pro čištění. Pasuje do pušek DPMS Panther LR série (.243, .260, .308 kalibr), Knight’s Armament SR-25, Remington R-25 (.308) a Stoner SR-25. Nepasuje do Armalite AR10.
SPECIFIKACE: Ocel, tepelně zpracovaná, černý oxidový povrch, polymerový zásobník, kapacita 20 ran. Délka 55⁄8 palců. Pasuje do pušek DPMS Panther LR série (.243, .260, .308 kalibr), Knight SR-25, Remington R-25 (.308) a Stoner SR-25. Neodpovídá ArmaLite AR-10, puškám Rock River Arms ani jakékoli pušce používající zásobník FN/FAL.
Další...
Hodnocení zákazníků pro položku PRO MAG AR .308 MAGAZINE 308 WINCHESTER 20RD STEEL BLACK
Počet hodnocení: 9
Od brownells.com: 9
Průměrné hodnocení: 3
Not Worth the $$(15.5.2013)
I have been in the shooting sport and firearms industry for close to 40 years. I have seen it all in my time. I own a LaRue ONB in 7.62mm, arguably, one of the best semi autos of all time. I ordered 3 of these 20 round magazines on Jan 4. Today, on 5/15/13 I received my order. All 3 magazines won't seat in the receiver without beating them in. The finish is rough as a cob like they were sandblasted with play ground sand. If anyone needs 3 Pro-Mag, DPMS 20round M110 magazines, check the auction sites because these 3 will be somewhere for sale in the next 24 hours.They are not fit for duty.
They work(25.5.2013)
I picked up 5 of these magazines for my 308 AR build only because they were the only magazines I could find (then and now). At first, the spring seemed weak and the bolt would only lock to the rear every other time the magazine was emptied. Now after a couple uses it locks to the rear every time. I've never had a misfeed either. It may be because the magazine seemed to be coated in a pretty heavy coat of grease when I opened the package and that may be finally wearing off, even after cleaning with CLP when I first got them. Overall not a bad magazine but there are definitely better ones out there. I wouldn't trust them in 3 gun competition but for normal range work they are more than fine.
They stick in my LWRC's mag well and jam(12.6.2013)
the followers are too small and tend to give tilt-type jams. By too small I mean teh forward edges tend to pop out over the mag body's retention "tabs".
These are nothing one would count on in a match
Good Mag and in stock(20.6.2013)
Worked fine in my DPMS sportico 308 and they have it in stock !
.308 magazine in m&p 10(15.7.2013)
I use it in my smith and Wesson m&p 10. it works great, does what it says, fits easily in my gun, locks the bolt to the rear after the last shot, haven't had any problems whatsoever, no double feeds or any malfunctions at all. the only reason I did not give this magazine 5 stars is when its fully loaded with rounds it makes this weird rattling sound when moved, that I would prefer it didn't make, other than that ill be buying a lot of these very soon.
OK IN m&p10(18.7.2013)
OK but a little balky in feeding.
Big fan!!!(19.4.2014)
LOVE IT
good mag for the price.(6.3.2017)
I used it at the range and they ran very well. I have a D.P.M.S. LR 308, and if you have one these mags are for you because the D.P.M.S. mags go for 40.00$ ea. One thing to note they take 19 rounds. If you try 20 it will not feed the first round. But with 19 all is well.
Bought 1 to evaluate(4.4.2018)
The magazine is well made with a smooth black phosphate finish. It looks almost OEM. Follower tilts. On a DPMS G2B24, it is a poor fit. Very difficult to insert and almost impossible to remove. Returned.