Prevents Recoil Spring Bind; Makes Takedown Easier
Full-length, two piece design fully supports the recoil spring to help the pistol chamber, extract and cycle smoother. Helps prevent spring bind, makes slide takedown fast and simple. Long wearing, shock-resistant head and hardened stainless steel shaft stand up to both competition and duty use.
SPECS: Stainless steel. Includes guide rod plug and 5/32" Allen wrench.
Plně podporující, dvoudílný design vodítka pružiny zajišťuje plynulejší nabití, extrakci a cyklus zbraně. Pomáhá předcházet zablokování pružiny, čímž zjednodušuje demontáž závěru. Odolná hlava a hřídel z kalené nerezové oceli vydrží jak soutěžní, tak služební použití.
SPECS: Nerezová ocel. Součástí balení je zátky vodítka pružiny a imbusový klíč 5/32".
Další...
Hodnocení zákazníků pro položku ED BROWN TWO PIECE GUIDE ROD FITS COMMANDER 4 1/4"
Počet hodnocení: 9
Od brownells.com: 9
Průměrné hodnocení: 4,4
It may work with some machining(3.5.2010)
Easy to install - needs some work on it to look right, rod to long, sticks out 1/8 inch in front of barrel bushing.
NOT TOO LONG FOR 4.25" COMMANDER(27.9.2012)
THIS IS VERY WELL MADE PART. DROPS RIGHT IN ON TRUE COMMANDERS. JUST MAKE SURE IT'S A 4.25" BARRELED COMMANDER. IF YOUR COMMANDER HAS A 4" BARREL IT WILL OBVIOUSLY BE A LITTLE LONG. I'VE PUT THEM IN COLTS & DAN WESSONS FOR CUSTOMERS & THEY WHERE VERY PLEASED!
Great product(1.9.2016)
This is a high quality product. It's sized perfectly for my Colt pistol.
Controls heavy recoil from +P loads(6.1.2012)
I wasn't really looking to upgrade my mil-spec guide rod until I test fired a friends 1911 with this product installed and I was amazed at the difference. Needless to say it is installed in my weapon and it truly tames those +P rounds. I wouldn't recommend firing super hot ammo all the time, but I like to practice with what I intend to use for self defense. I loved this product!
Good Rock Island1911 after alteration(25.2.2012)
I had to grind a little bit of material off of the round section of the back of the guid rod base. It was not letting the base site flush. I have a 2011 Rock Island full size 1911 A1FS GI.
Good after minor alteration(25.2.2012)
It requred some grinding of the round backing in order for it not to get stuck in a position that caued binding. I put it on a 2011 Rock Island 1922 A!FS.
EASY UPGRADE(27.9.2012)
I'VE INSTALLED ALOT OF THESE IN CUSTOMERS GUNS. COLT, SPRINGFIELD, KIMBER, DAN WESSON, TAURUS, ETC.. ALL THE BENEFITS OF A 1-PIECE GUIDE ROD BUT MAKES IT MUCH EASIER TO DISASSEMBLE. I'VE NEVER HAD TO GRIND ON 1 OR MODIFIY IN ANY WAY. BEAUTIFUL FINISH, LOOKS LIKE ONE SOLID PIECE UNTIL YOU UNSREW IT.
Over All Good Drop In Upgrade(9.6.2014)
I installed this on my Ruger SR1911 and it was a perfect fit. The OAL was spot on. Very easy to install (if you can field strip your weapon you can install this part)and the included allen wrench actually fits. A bit of a rarity as far as included tools go these days, and it's not a soft steel wrench that rounds off easily. Not that you need a lot of torque on this. The spring cup to guide rod fit is surprisingly tight. Another advantage that is not in the description is a little added muzzle weight. Not enough to be a bother while sighting but helps to reduce muzzle rise just slightly. I also suspect the spring cup to be slightly thicker between the spring and barrel bushing. The new parts went in a little stiffer than the factory parts did. My pistol only had about a box of ammo through it before the upgrade. The only thing I think I'll be doing to improve this part is a bit of polishing. I can feel the spring rub against the guide rod, but if I were more patient I'm sure the parts would smooth themselves out with a few trips to the range. In conclusion I would recommend this as a simple upgrade to any level of 1911 shooter. I'll be ordering more for my other govt' models.
Produkt č.: 087045890 ED BROWN TWO PIECE GUIDE ROD FITS COMMANDER 4 1/4" Číslo výrobce: 889C800732889023 Plně podporující, dvoudílný design vodítka pružiny zajišťuje plynulejší nabití, extrakci a cyklus zbraně. Pomáhá předcházet zablokování pružiny, čímž zjednodušuje demontáž závěru. Odolná hlava a hřídel z kalené nerezové oceli vydrží jak soutěžní, tak služební použití.
1499CZK21 499,00 Kč
*
Dodací lhůta je přibližně 14-21 dní. 2 Počet ks. skladem USA
Made in USA
US exportní klasifikace: 0A501.x
Prohlášení o kontrole do destinace: "Tyto položky jsou kontrolovány vládou Spojených států a jsou povoleny na vývoz pouze do země konečného určení k použití konečným příjemcem nebo konečným uživatelem (uživatel,), kteří jsou zde identifikováni. Nesmějí být dále prodány, přepraveny ani jinak zlikvidovány v žádné jiné zemi nebo jiné osobě, než je oprávněn konečný příjemce nebo koncový uživatel, a to buď v jejich původní formě nebo po začlenění do jiných položek, aniž by nejprve získali souhlas od vlády USA nebo byly jinak povoleny."
This item is controlled by the U.S. government and authorized for export only to the country of ultimate destination for use by the ultimate consignee or end-user(s) herein identified. It may not be resold, transferred, or otherwise disposed of, to any other country or to any person other than the authorized ultimate consignee or end-user(s), either in their original form or after being incorporated into other items, without first obtaining approval from the U.S. government or as otherwise authorized by U.S. law and regulations.
Produkt č.: 087045889 ED BROWN TWO PIECE GUIDE ROD FITS GOVT. 5" Číslo výrobce: 889800732889009 Plně podporující, dvoudílný design vodítka pružiny zajišťuje plynulejší nabití, extrakci a cyklus zbraně. Pomáhá předcházet zablokování pružiny, čímž zjednodušuje demontáž závěru. Odolná hlava a hřídel z kalené nerezové oceli vydrží jak soutěžní, tak služební použití.
1449CZK91 449,00 Kč
*
Dodací lhůta je přibližně 14-21 dní. 9 Počet ks. skladem USA
Prevents Recoil Spring Bind; Makes Takedown Easier
Full-length, two piece design fully supports the recoil spring to help the pistol chamber, extract and cycle smoother. Helps prevent spring bind, makes slide takedown fast and simple. Long wearing, shock-resistant head and hardened stainless steel shaft stand up to both competition and duty use.
SPECS: Stainless steel. Includes guide rod plug and 5/32" Allen wrench.
Plně podporující, dvoudílný design vodítka pružiny zajišťuje plynulejší nabití, extrakci a cyklus zbraně. Pomáhá předcházet zablokování pružiny, čímž zjednodušuje demontáž závěru. Odolná hlava a hřídel z kalené nerezové oceli vydrží jak soutěžní, tak služební použití.
SPECS: Nerezová ocel. Součástí balení je zátky vodítka pružiny a imbusový klíč 5/32".
Další...
Hodnocení zákazníků pro položku ED BROWN TWO PIECE GUIDE ROD FITS COMMANDER 4 1/4"
Počet hodnocení: 9
Od brownells.com: 9
Průměrné hodnocení: 4,4
It may work with some machining(3.5.2010)
Easy to install - needs some work on it to look right, rod to long, sticks out 1/8 inch in front of barrel bushing.
NOT TOO LONG FOR 4.25" COMMANDER(27.9.2012)
THIS IS VERY WELL MADE PART. DROPS RIGHT IN ON TRUE COMMANDERS. JUST MAKE SURE IT'S A 4.25" BARRELED COMMANDER. IF YOUR COMMANDER HAS A 4" BARREL IT WILL OBVIOUSLY BE A LITTLE LONG. I'VE PUT THEM IN COLTS & DAN WESSONS FOR CUSTOMERS & THEY WHERE VERY PLEASED!
Great product(1.9.2016)
This is a high quality product. It's sized perfectly for my Colt pistol.
Controls heavy recoil from +P loads(6.1.2012)
I wasn't really looking to upgrade my mil-spec guide rod until I test fired a friends 1911 with this product installed and I was amazed at the difference. Needless to say it is installed in my weapon and it truly tames those +P rounds. I wouldn't recommend firing super hot ammo all the time, but I like to practice with what I intend to use for self defense. I loved this product!
Good Rock Island1911 after alteration(25.2.2012)
I had to grind a little bit of material off of the round section of the back of the guid rod base. It was not letting the base site flush. I have a 2011 Rock Island full size 1911 A1FS GI.
Good after minor alteration(25.2.2012)
It requred some grinding of the round backing in order for it not to get stuck in a position that caued binding. I put it on a 2011 Rock Island 1922 A!FS.
EASY UPGRADE(27.9.2012)
I'VE INSTALLED ALOT OF THESE IN CUSTOMERS GUNS. COLT, SPRINGFIELD, KIMBER, DAN WESSON, TAURUS, ETC.. ALL THE BENEFITS OF A 1-PIECE GUIDE ROD BUT MAKES IT MUCH EASIER TO DISASSEMBLE. I'VE NEVER HAD TO GRIND ON 1 OR MODIFIY IN ANY WAY. BEAUTIFUL FINISH, LOOKS LIKE ONE SOLID PIECE UNTIL YOU UNSREW IT.
Over All Good Drop In Upgrade(9.6.2014)
I installed this on my Ruger SR1911 and it was a perfect fit. The OAL was spot on. Very easy to install (if you can field strip your weapon you can install this part)and the included allen wrench actually fits. A bit of a rarity as far as included tools go these days, and it's not a soft steel wrench that rounds off easily. Not that you need a lot of torque on this. The spring cup to guide rod fit is surprisingly tight. Another advantage that is not in the description is a little added muzzle weight. Not enough to be a bother while sighting but helps to reduce muzzle rise just slightly. I also suspect the spring cup to be slightly thicker between the spring and barrel bushing. The new parts went in a little stiffer than the factory parts did. My pistol only had about a box of ammo through it before the upgrade. The only thing I think I'll be doing to improve this part is a bit of polishing. I can feel the spring rub against the guide rod, but if I were more patient I'm sure the parts would smooth themselves out with a few trips to the range. In conclusion I would recommend this as a simple upgrade to any level of 1911 shooter. I'll be ordering more for my other govt' models.