Fusion, Pro-Series, Match Trigger, K-HOLE (Skelontonized), Long Length, Silver finish, Aluminum adjustable Light weight combat/match trigger for the 1911 pistol. The Trigger bow is also adjustable to obtain a good trigger fit in your frame. Comes with a serrated front trigger pad and adjustment screw. Some fitting may be required. Will work with most all sizes, makes, and models of 1911 pistols and clones.
SPECS: Fits all 1911 models and are adjustable. Available in a silver or black finish.
Další...
Fusion, Pro-Series, Match Trigger, K-HOLE (Skelontonized), dlouhá délka, stříbrné provedení, hliníkový nastavitelný lehký bojový/soutěžní spoušť pro pistoli 1911. Tělo spouště je také nastavitelné pro dosažení dobrého sedu spouště ve vašem rámu. Součástí je přední spoušť se zoubkovaným povrchem a nastavitelný šroub. Může vyžadovat určité úpravy. Spoušť je kompatibilní s většinou velikostí, značek a modelů pistolí 1911 a jejich klonů.
SPECS: Pasuje na všechny modely 1911 a jsou nastavitelné. K dispozici ve stříbrné nebo černé úpravě.
Další...
Hodnocení zákazníků pro položku FUSION FIREARMS 1911 K-HOLE BLACK TRIGGER
Počet hodnocení: 9
Od brownells.com: 9
Průměrné hodnocení: 3,6
Awesome trigger(7.11.2015)
I am an amateur gunsmith/1911 builder, and have had a lot of experience with 1911 triggers. I have had more compliments on this K-Hole than any of my others. I didn't check "fitting required", as I don't consider reasonable fitting of 1911 parts a "con". Fitting should never be a surprise when it come to most 1911 parts. "It goes with the territory". This trigger required a little bit of fitting, which I considered a good thing, as I was able to get it "just right". The quality, looks, performance are all excellent for an EXCEPTIONALLY good price. 5 star+, (in my opinion).
Nice looking trigger & easy to install(23.1.2017)
I'm only giving it 4 stars as the edges of the bow were rough and the bow was not straight with the trigger. After straightening the bow and stoning off the sharp edges, it fit perfectly and moved smoothly - now it's a 5. Adjusting the "wings" to set/limit trigger take up was easy as well as setting the over travel screw.
Received this trigger as an upgrade to the stock trigger in my Remington R1 Enhanced. Out of the package the bow was 'bowed' inward to the point where the magazine wouldn't even pass through. Tried to straighten but when dealing with spring steel it is very difficult to correct the geometry 100%. Installed in firearm and got it to work without effecting magazine loading/unloading, however the bow now had excessive friction in the trigger channels causing an unsatisfactory trigger pull. Reordered an STI trigger with which I've had good experiences twice previously. Installed and adjusted the STI trigger and its perfect. As for the K-Hole one well ill just write of this as a $20 lesson learned!
Great trigger(27.2.2018)
I have installed 15+ of these along with trigger work. I have never had a problem. Great trigger for the price. Some fitting is required, but that is a good thing.
Gunsmithing Required(20.6.2015)
This was installed in my American Tactical Thunderbolt. The Thunderbolt banana hole trigger is smooth and crisp but is not adjustable for over travel.
The Fusion trigger measured the same as the Thunderbolt trigger, but the shoe is off with the bow. There is a .080 gap from top of shoe and trigger guard. I had to sand about .050 from shoe bottom to fit. the Wilson Combat trigger is oversize evenly for a better fit.
The trigger bow had sharp burrs rubbing against frame . I mark the bow and stoned burrs and sharp corners that was rubbing.
The end of the trigger bow is .020 To high and had to be sanded so trigger will fit in bow channel. This was main gun smithing problem for the disconnect, sear and mainspring engage.
I use a dial caliper to measure the h x w x l of the shoe and trigger bow. I dye each part while fitting to see where contact was issue. Sand .005 At a time until fit (it's easier to remove material than add). I put the sand paper and flat/ smooth surface (glass or granite) to ensure even removal. I have not use at the range yet to see quality, durability and performance of the trigger, shoe and adjustable set screw.
Awesome Trigger(7.7.2015)
Awesome trigger, used it on my 1911 and it really fit great and looks great once installed.
This is a great Trigger!(13.11.2016)
Zero Cons! This is a better trigger than the most popular brand.
All day long. Yes, you may need to run it over some 320 Wet/Dry.
That is fitting it to your frame. Where the other brand will not engage the Magazine release, this trigger will. It has a better finish. And will polish up to make the most crisp trigger break.
I have used two of these great triggers that beats the competition to pieces. Do not hastate, or worry about it. It is my favorite, hands down.
Garbage(9.4.2017)
Couldn't get it to fit no matter how, found that each side of the bow were set into the trigger unequal. Tried everything. Spend ten more dollars and get a quality trigger from a dependable company.not happy with this at all.
minimal smitthing required(3.10.2018)
This is a part for a gun. I expected it to need some work to make it perfect. A little tuning and it's exactly what I want.
Produkt č.: 100801025 FUSION FIREARMS 1911 K-HOLE BLACK TRIGGER Číslo výrobce: 1911-TRG-49-4 Fusion, Pro-Series, Match Trigger, K-HOLE (Skelontonized), dlouhá délka, stříbrné provedení, hliníkový nastavitelný lehký bojový/soutěžní spoušť pro pistoli 1911. Tělo spouště je také nastavitelné pro dosažení dobrého sedu spouště ve vašem rámu. Součástí je přední spoušť se zoubkovaným povrchem a nastavitelný šroub. Může vyžadovat určité úpravy. Spoušť je kompatibilní s většinou velikostí, značek a modelů pistolí 1911 a jejich klonů.
1249CZK71 249,00 Kč
*
Dodací lhůta je přibližně 14-21 dní. 7 Počet ks. skladem USA
Made in USA
US exportní klasifikace: 0A501.c
Prohlášení o kontrole do destinace: "Tyto položky jsou kontrolovány vládou Spojených států a jsou povoleny na vývoz pouze do země konečného určení k použití konečným příjemcem nebo konečným uživatelem (uživatel,), kteří jsou zde identifikováni. Nesmějí být dále prodány, přepraveny ani jinak zlikvidovány v žádné jiné zemi nebo jiné osobě, než je oprávněn konečný příjemce nebo koncový uživatel, a to buď v jejich původní formě nebo po začlenění do jiných položek, aniž by nejprve získali souhlas od vlády USA nebo byly jinak povoleny."
This item is controlled by the U.S. government and authorized for export only to the country of ultimate destination for use by the ultimate consignee or end-user(s) herein identified. It may not be resold, transferred, or otherwise disposed of, to any other country or to any person other than the authorized ultimate consignee or end-user(s), either in their original form or after being incorporated into other items, without first obtaining approval from the U.S. government or as otherwise authorized by U.S. law and regulations.
Produkt č.: 100801024 FUSION FIREARMS 1911 K-HOLE SILVER TRIGGER Číslo výrobce: 1911-TRG-49-3 Fusion, Pro-Series, Match Trigger, K-HOLE (Skelontonized), dlouhá délka, stříbrné provedení, hliníkový nastavitelný lehký bojový/soutěžní spoušť pro pistoli 1911. Tělo spouště je také nastavitelné pro dosažení dobrého sedu spouště ve vašem rámu. Součástí je přední spoušť se zoubkovaným povrchem a nastavitelný šroub. Může vyžadovat určité úpravy. Spoušť je kompatibilní s většinou velikostí, značek a modelů pistolí 1911 a jejich klonů.
1249CZK41 249,00 Kč
*
Dodací lhůta je přibližně 14-21 dní. 4 Počet ks. skladem USA
Fusion, Pro-Series, Match Trigger, K-HOLE (Skelontonized), Long Length, Silver finish, Aluminum adjustable Light weight combat/match trigger for the 1911 pistol. The Trigger bow is also adjustable to obtain a good trigger fit in your frame. Comes with a serrated front trigger pad and adjustment screw. Some fitting may be required. Will work with most all sizes, makes, and models of 1911 pistols and clones.
SPECS: Fits all 1911 models and are adjustable. Available in a silver or black finish.
Další...
Fusion, Pro-Series, Match Trigger, K-HOLE (Skelontonized), dlouhá délka, stříbrné provedení, hliníkový nastavitelný lehký bojový/soutěžní spoušť pro pistoli 1911. Tělo spouště je také nastavitelné pro dosažení dobrého sedu spouště ve vašem rámu. Součástí je přední spoušť se zoubkovaným povrchem a nastavitelný šroub. Může vyžadovat určité úpravy. Spoušť je kompatibilní s většinou velikostí, značek a modelů pistolí 1911 a jejich klonů.
SPECS: Pasuje na všechny modely 1911 a jsou nastavitelné. K dispozici ve stříbrné nebo černé úpravě.
Další...
Hodnocení zákazníků pro položku FUSION FIREARMS 1911 K-HOLE BLACK TRIGGER
Počet hodnocení: 9
Od brownells.com: 9
Průměrné hodnocení: 3,6
Awesome trigger(7.11.2015)
I am an amateur gunsmith/1911 builder, and have had a lot of experience with 1911 triggers. I have had more compliments on this K-Hole than any of my others. I didn't check "fitting required", as I don't consider reasonable fitting of 1911 parts a "con". Fitting should never be a surprise when it come to most 1911 parts. "It goes with the territory". This trigger required a little bit of fitting, which I considered a good thing, as I was able to get it "just right". The quality, looks, performance are all excellent for an EXCEPTIONALLY good price. 5 star+, (in my opinion).
Nice looking trigger & easy to install(23.1.2017)
I'm only giving it 4 stars as the edges of the bow were rough and the bow was not straight with the trigger. After straightening the bow and stoning off the sharp edges, it fit perfectly and moved smoothly - now it's a 5. Adjusting the "wings" to set/limit trigger take up was easy as well as setting the over travel screw.
Received this trigger as an upgrade to the stock trigger in my Remington R1 Enhanced. Out of the package the bow was 'bowed' inward to the point where the magazine wouldn't even pass through. Tried to straighten but when dealing with spring steel it is very difficult to correct the geometry 100%. Installed in firearm and got it to work without effecting magazine loading/unloading, however the bow now had excessive friction in the trigger channels causing an unsatisfactory trigger pull. Reordered an STI trigger with which I've had good experiences twice previously. Installed and adjusted the STI trigger and its perfect. As for the K-Hole one well ill just write of this as a $20 lesson learned!
Great trigger(27.2.2018)
I have installed 15+ of these along with trigger work. I have never had a problem. Great trigger for the price. Some fitting is required, but that is a good thing.
Gunsmithing Required(20.6.2015)
This was installed in my American Tactical Thunderbolt. The Thunderbolt banana hole trigger is smooth and crisp but is not adjustable for over travel.
The Fusion trigger measured the same as the Thunderbolt trigger, but the shoe is off with the bow. There is a .080 gap from top of shoe and trigger guard. I had to sand about .050 from shoe bottom to fit. the Wilson Combat trigger is oversize evenly for a better fit.
The trigger bow had sharp burrs rubbing against frame . I mark the bow and stoned burrs and sharp corners that was rubbing.
The end of the trigger bow is .020 To high and had to be sanded so trigger will fit in bow channel. This was main gun smithing problem for the disconnect, sear and mainspring engage.
I use a dial caliper to measure the h x w x l of the shoe and trigger bow. I dye each part while fitting to see where contact was issue. Sand .005 At a time until fit (it's easier to remove material than add). I put the sand paper and flat/ smooth surface (glass or granite) to ensure even removal. I have not use at the range yet to see quality, durability and performance of the trigger, shoe and adjustable set screw.
Awesome Trigger(7.7.2015)
Awesome trigger, used it on my 1911 and it really fit great and looks great once installed.
This is a great Trigger!(13.11.2016)
Zero Cons! This is a better trigger than the most popular brand.
All day long. Yes, you may need to run it over some 320 Wet/Dry.
That is fitting it to your frame. Where the other brand will not engage the Magazine release, this trigger will. It has a better finish. And will polish up to make the most crisp trigger break.
I have used two of these great triggers that beats the competition to pieces. Do not hastate, or worry about it. It is my favorite, hands down.
Garbage(9.4.2017)
Couldn't get it to fit no matter how, found that each side of the bow were set into the trigger unequal. Tried everything. Spend ten more dollars and get a quality trigger from a dependable company.not happy with this at all.
minimal smitthing required(3.10.2018)
This is a part for a gun. I expected it to need some work to make it perfect. A little tuning and it's exactly what I want.