Give positive purchase for removing grip screws and prevents damaged, ragged-looking grips and screws. Turned to fit flush with most popular aftermarket grips.
SPECS: Steel, heat treated, .150"-50 x .250" tpi. Available blue or stainless steel. Includes Allen wrench.
Další...
Eliminuje Poškození Drážek Šroubů
Zajišťuje pevný úchop pro odstranění šroubů rukojeti a předchází poškození, vytvoření ošklivého vzhledu rukojetí a šroubů. Upraveno tak, aby zapadalo s většinou oblíbených aftermarket rukojetí.
SPECS: Ocel, tepelně zpracovaná, .150"-50 x .250" tpi. Dostupné v modré nebo nerezové oceli. Včetně imbusového klíče.
Další...
Hodnocení zákazníků pro položku WILSON COMBAT 24 PACK H/H S/S GRIP SCREWS
Počet hodnocení: 8
Od brownells.com: 8
Průměrné hodnocení: 4
What's to say(2.11.2012)
Switched over to the hex heads on my 1911's. Love 'em.
Great fit and enhance the appearance.(17.11.2013)
These stainless steel hex screws came with a hex wrench for installation. Removed my blued screws and simply installed these. They make a nice difference in the appearance of the gun also. I used these on my Thompson 1911TCA and had no problem with the fit.
Great Quality & Good Looking(2.1.2014)
I messed up a screw and bushing attempting to install a Pachmayr Finger Groove grip on my Colt Government 38 Super. I ordered a set of the stainless bushings along with these matching hex screws.
Taking the advise of one of the reviewers I also ordered a bushing tool which made the removal and installation of the new bushings a snap.
These looked and functioned so well I removed the three good bushings and used this complete set of bushings and screws. The end result a much better looking 1911 with that stainless steel showing up on the black grip.
I would highly recommend the stainless bushing & hex screws and certainly add one of those bushing tools to your order if you do not have one.
perfect but didnt fit para (28.8.2014)
Wish these fit but didnt and by time I ship them back id just be giving them away mabe. A gift
DOES NOT FIT 1911 NORINCOS(24.12.2011)
I ordered 2 sets for my Norinco 1911s. The label in the Wilson packet says : Fits most 1911 Styles excet the Norinco * 1911. If I had gone to the Wilson internet site I would have known not to order this product. Will sell them on to someone with a suitable 1911.Would be great if they fitted.
Great grip screws(30.6.2012)
I have a bad habbit of breaking the heads off most factory grip screws. Since I switched to the Wilson Combat screws, I havent broken one yet. They are definately stronger than stock and look great too.
Head separated from the screw(15.8.2012)
While removing the grips to clean around/under them, was removing one of the screws when the head separated from the screw shaft. Since these are only holding grips on, they are only finger tightened with the hex wrench and not even torqued. Was really dismayed cause I thought I was in a world of hurt. Finished removing the grip and found out that I could take my dental pick and use it to back out the screw shaft. This was probably just a fluke but I can't say that I would order a replacement set. Don't understand why it separated. So, I ordered a set of the 1911 AUTO TiN-COATED Hex Head Gold colored screws. They seem to contrast pretty well with the black frame and slide also. They're working well so far.
Breaks Easly(8.7.2013)
Grip screws easly break when tightning and loosening. I would not recommend. The first time I thought it was just a chance occurence. On the second, third and fourth break, I knew it was quality. These were not all on the same gun and were not from the same package.
Produkt č.: 965313124 WILSON COMBAT 24 PACK H/H S/S GRIP SCREWS Číslo výrobce: 313SG874218000820 Zajišťuje pevný úchop pro odstranění šroubů rukojeti a předchází poškození, vytvoření ošklivého vzhledu rukojetí a šroubů. Upraveno tak, aby zapadalo s většinou oblíbených aftermarket rukojetí.
1799CZK31 799,00 Kč
*
Dodací lhůta je přibližně 14-21 dní. 3 Počet ks. skladem USA
Produkt č.: 965313024 WILSON COMBAT 24 PACK H/H BLUE SCREWS Číslo výrobce: 313BG874218000806 Zajišťuje pevný úchop pro odstranění šroubů rukojeti a předchází poškození, vytvoření ošklivého vzhledu rukojetí a šroubů. Upraveno tak, aby zapadalo s většinou oblíbených aftermarket rukojetí.
1649CZK11 649,00 Kč
*
Dodací lhůta je přibližně 14-21 dní. 1 Počet ks. skladem USA
Produkt č.: 965313104 WILSON COMBAT 4 PACK H/H S/S G/SCREWS Číslo výrobce: 313S874218000813 Zajišťuje pevný úchop pro odstranění šroubů rukojeti a předchází poškození, vytvoření ošklivého vzhledu rukojetí a šroubů. Upraveno tak, aby zapadalo s většinou oblíbených aftermarket rukojetí.
549CZK1549,00 Kč
*
Dodací lhůta je přibližně 14-21 dní. 1 Počet ks. skladem USA
Produkt č.: 965313004 WILSON COMBAT 4 PACK H/H BLUE G/SCREWS Číslo výrobce: 313B874218000790 Zajišťuje pevný úchop pro odstranění šroubů rukojeti a předchází poškození, vytvoření ošklivého vzhledu rukojetí a šroubů. Upraveno tak, aby zapadalo s většinou oblíbených aftermarket rukojetí.
469CZK0469,00 Kč
*
Předbjednávka, dodací lhůta je přibližně 4-12 týdny ze skladu z USA.
Give positive purchase for removing grip screws and prevents damaged, ragged-looking grips and screws. Turned to fit flush with most popular aftermarket grips.
SPECS: Steel, heat treated, .150"-50 x .250" tpi. Available blue or stainless steel. Includes Allen wrench.
Další...
Eliminuje Poškození Drážek Šroubů
Zajišťuje pevný úchop pro odstranění šroubů rukojeti a předchází poškození, vytvoření ošklivého vzhledu rukojetí a šroubů. Upraveno tak, aby zapadalo s většinou oblíbených aftermarket rukojetí.
SPECS: Ocel, tepelně zpracovaná, .150"-50 x .250" tpi. Dostupné v modré nebo nerezové oceli. Včetně imbusového klíče.
Další...
Hodnocení zákazníků pro položku WILSON COMBAT 24 PACK H/H S/S GRIP SCREWS
Počet hodnocení: 8
Od brownells.com: 8
Průměrné hodnocení: 4
What's to say(2.11.2012)
Switched over to the hex heads on my 1911's. Love 'em.
Great fit and enhance the appearance.(17.11.2013)
These stainless steel hex screws came with a hex wrench for installation. Removed my blued screws and simply installed these. They make a nice difference in the appearance of the gun also. I used these on my Thompson 1911TCA and had no problem with the fit.
Great Quality & Good Looking(2.1.2014)
I messed up a screw and bushing attempting to install a Pachmayr Finger Groove grip on my Colt Government 38 Super. I ordered a set of the stainless bushings along with these matching hex screws.
Taking the advise of one of the reviewers I also ordered a bushing tool which made the removal and installation of the new bushings a snap.
These looked and functioned so well I removed the three good bushings and used this complete set of bushings and screws. The end result a much better looking 1911 with that stainless steel showing up on the black grip.
I would highly recommend the stainless bushing & hex screws and certainly add one of those bushing tools to your order if you do not have one.
perfect but didnt fit para (28.8.2014)
Wish these fit but didnt and by time I ship them back id just be giving them away mabe. A gift
DOES NOT FIT 1911 NORINCOS(24.12.2011)
I ordered 2 sets for my Norinco 1911s. The label in the Wilson packet says : Fits most 1911 Styles excet the Norinco * 1911. If I had gone to the Wilson internet site I would have known not to order this product. Will sell them on to someone with a suitable 1911.Would be great if they fitted.
Great grip screws(30.6.2012)
I have a bad habbit of breaking the heads off most factory grip screws. Since I switched to the Wilson Combat screws, I havent broken one yet. They are definately stronger than stock and look great too.
Head separated from the screw(15.8.2012)
While removing the grips to clean around/under them, was removing one of the screws when the head separated from the screw shaft. Since these are only holding grips on, they are only finger tightened with the hex wrench and not even torqued. Was really dismayed cause I thought I was in a world of hurt. Finished removing the grip and found out that I could take my dental pick and use it to back out the screw shaft. This was probably just a fluke but I can't say that I would order a replacement set. Don't understand why it separated. So, I ordered a set of the 1911 AUTO TiN-COATED Hex Head Gold colored screws. They seem to contrast pretty well with the black frame and slide also. They're working well so far.
Breaks Easly(8.7.2013)
Grip screws easly break when tightning and loosening. I would not recommend. The first time I thought it was just a chance occurence. On the second, third and fourth break, I knew it was quality. These were not all on the same gun and were not from the same package.