Curved shape drops the pistol deeper into the hand and lowers the line of sight for less felt recoil and a faster pointing gun. Wide beavertail shape prevents the hammer from "bit-ing" the web of the hand. Palmswell"! model fea- tures a raised pad that maintains constant hand contact for the shooter using a high thumb hold.
SPECS: Steel, matte BLUE or satin stainless (S/S). .866" (22mm) from rear of hole to tip. Available Standard or Palmswell. Series 70 or 80. .250" radius requires alteration to frame.
Další...
Snížení linií zaměření pistole ve vaší ruce
Zakřivený tvar zasune pistoli hlouběji do ruky a snižuje linií zaměření pro menší cítěný zpětný ráz a rychlejší namíření zbraně. Široký tvar beavertailu zabraňuje "kousání" kladiva do kůže mezi palcem a ukazováčkem. Model "Palmswell"! obsahuje zvýšenou podložku, která zajišťuje stálý kontakt ruky pro střelce, který používá vysoký držení palce.
SPECS: Ocel, matně modrá nebo saténově nerezová (S/S). .866" (22mm) od zadní části otvoru po špičku. Dostupné ve variantách Standard nebo Palmswell. Série 70 nebo 80. .250" rádius vyžaduje úpravu rámu.
Další...
Hodnocení zákazníků pro položku SMITH & ALEXANDER SERIES 70, STANDARD HI-GRIP SAFETY, BLUE
Počet hodnocení: 10
Od brownells.com: 10
Průměrné hodnocení: 4,1
Well made!(7.7.2010)
Good product, nice finish. Just be sure that you understand that it will still need to be fitted internally.
Nice safety(10.1.2011)
This is a well made part that replaced the OEM on a Colt Combat Elite XSE. The arm needed fitting, otherwise, it dropped right it. The palmswell is necessary for me because I shoot with my thumb on top of safety. It disengages positively and is very comfortable.
Great Product.(30.5.2012)
Product is exactly as described, i suggest getting the jig for it as it makes fitting alot quicker. you still need to fit and shape the finger on the saftey to make sure it engages properly. but with the jig you get the bulk of the work out quicker. i like this product and i would recommend to anyone.
Smith & Alexander grip safety(3.3.2017)
I have fitted many safeties on the 1911s. however this seemed to be the hardest one I have had to do. I bought two for two different 1911 I was working on one was a cheap Philipino model the other was a Colt . and I had the same issues with both. I would not recommend this product unless you like to struggle.
Nice Addition(25.10.2010)
Used on a "scratch built" Government Model on an (iffy?) SS Essex frame. Fitted to frame using S&A's installation jig (Brownell's #849-007-000). Took some fitting to "blend" the contours to frame, but I couldn't be happier with the results. Also requires fitting to get correct safety block at end of trigger bow, so be aware of this.
Good-Bye hammer bite.(13.2.2011)
Installed this on a Springfield GI model. Used the S&A jig which worked very well. It was harder to grind the frame than I thought it would be, but I'm not a gunsmith and was using a dremel tool with a carbide bit. It turned out very well though and was well worth the effort; stopping the hamner bite and looking great. Of course you will need to replace the spur hammer too.
beaver tail for my GI(29.5.2011)
By the jig to keep the angles correct, with the jig it took about an hour to reshape the frame, blend it in and reinstall. I am not a gunsmith ,but am a fair hand with tools. The fitting required for this piece was considerably less than expected. This piece is a slightly shortened beavertail which aids in concealed carry.
Nice eddition to my 70 series Gold Cup(23.3.2015)
Nice finish, Left side needed some grinding on safety and frame. Spent several hours getting the sear clearance correct.
Hammer groove was perfect for a commander hammer.
Check out some U-Tube video's if you haven't done this before.
gsg 1911(4.5.2014)
Bought to Install on GSG 1911 .22 to replicate feel of R1 enhanced. Took some blending on grip and channeling for spring but looked and functioned flawlessly.
Nice grip safety(5.12.2015)
This is my 'go to' grip safety for custom work. It allows for a nice high purchase and requires minimal fitting.
Produkt č.: 849007071 SMITH & ALEXANDER SERIES 70, STANDARD HI-GRIP SAFETY, BLUE Zakřivený tvar zasune pistoli hlouběji do ruky a snižuje linií zaměření pro menší cítěný zpětný ráz a rychlejší namíření zbraně. Široký tvar beavertailu zabraňuje "kousání" kladiva do kůže mezi palcem a ukazováčkem. Model "Palmswell"! obsahuje zvýšenou podložku, která zajišťuje stálý kontakt ruky pro střelce, který používá vysoký držení palce.
Made in USA
US exportní klasifikace: 0A501.x
Prohlášení o kontrole do destinace: "Tyto položky jsou kontrolovány vládou Spojených států a jsou povoleny na vývoz pouze do země konečného určení k použití konečným příjemcem nebo konečným uživatelem (uživatel,), kteří jsou zde identifikováni. Nesmějí být dále prodány, přepraveny ani jinak zlikvidovány v žádné jiné zemi nebo jiné osobě, než je oprávněn konečný příjemce nebo koncový uživatel, a to buď v jejich původní formě nebo po začlenění do jiných položek, aniž by nejprve získali souhlas od vlády USA nebo byly jinak povoleny."
This item is controlled by the U.S. government and authorized for export only to the country of ultimate destination for use by the ultimate consignee or end-user(s) herein identified. It may not be resold, transferred, or otherwise disposed of, to any other country or to any person other than the authorized ultimate consignee or end-user(s), either in their original form or after being incorporated into other items, without first obtaining approval from the U.S. government or as otherwise authorized by U.S. law and regulations.
Produkt č.: 849007072 SMITH & ALEXANDER SERIES 70, PALMSWELL HI-GRIP SAFETY, BLUE Číslo výrobce: GSBLPALMSWELS70 Zakřivený tvar zasune pistoli hlouběji do ruky a snižuje linií zaměření pro menší cítěný zpětný ráz a rychlejší namíření zbraně. Široký tvar beavertailu zabraňuje "kousání" kladiva do kůže mezi palcem a ukazováčkem. Model "Palmswell"! obsahuje zvýšenou podložku, která zajišťuje stálý kontakt ruky pro střelce, který používá vysoký držení palce.
Produkt č.: 849007082 SMITH & ALEXANDER SERIES 80, PALMSWELL HI-GRIP SAFETY, BLUE Číslo výrobce: GSBLPALMSWELS80 Zakřivený tvar zasune pistoli hlouběji do ruky a snižuje linií zaměření pro menší cítěný zpětný ráz a rychlejší namíření zbraně. Široký tvar beavertailu zabraňuje "kousání" kladiva do kůže mezi palcem a ukazováčkem. Model "Palmswell"! obsahuje zvýšenou podložku, která zajišťuje stálý kontakt ruky pro střelce, který používá vysoký držení palce.
Produkt č.: 849007172 SMITH & ALEXANDER SERIES 70, PALMSWELL HI-GRIP SAFETY, S/S Zakřivený tvar zasune pistoli hlouběji do ruky a snižuje linií zaměření pro menší cítěný zpětný ráz a rychlejší namíření zbraně. Široký tvar beavertailu zabraňuje "kousání" kladiva do kůže mezi palcem a ukazováčkem. Model "Palmswell"! obsahuje zvýšenou podložku, která zajišťuje stálý kontakt ruky pro střelce, který používá vysoký držení palce.
Curved shape drops the pistol deeper into the hand and lowers the line of sight for less felt recoil and a faster pointing gun. Wide beavertail shape prevents the hammer from "bit-ing" the web of the hand. Palmswell"! model fea- tures a raised pad that maintains constant hand contact for the shooter using a high thumb hold.
SPECS: Steel, matte BLUE or satin stainless (S/S). .866" (22mm) from rear of hole to tip. Available Standard or Palmswell. Series 70 or 80. .250" radius requires alteration to frame.
Další...
Snížení linií zaměření pistole ve vaší ruce
Zakřivený tvar zasune pistoli hlouběji do ruky a snižuje linií zaměření pro menší cítěný zpětný ráz a rychlejší namíření zbraně. Široký tvar beavertailu zabraňuje "kousání" kladiva do kůže mezi palcem a ukazováčkem. Model "Palmswell"! obsahuje zvýšenou podložku, která zajišťuje stálý kontakt ruky pro střelce, který používá vysoký držení palce.
SPECS: Ocel, matně modrá nebo saténově nerezová (S/S). .866" (22mm) od zadní části otvoru po špičku. Dostupné ve variantách Standard nebo Palmswell. Série 70 nebo 80. .250" rádius vyžaduje úpravu rámu.
Další...
Hodnocení zákazníků pro položku SMITH & ALEXANDER SERIES 70, STANDARD HI-GRIP SAFETY, BLUE
Počet hodnocení: 10
Od brownells.com: 10
Průměrné hodnocení: 4,1
Well made!(7.7.2010)
Good product, nice finish. Just be sure that you understand that it will still need to be fitted internally.
Nice safety(10.1.2011)
This is a well made part that replaced the OEM on a Colt Combat Elite XSE. The arm needed fitting, otherwise, it dropped right it. The palmswell is necessary for me because I shoot with my thumb on top of safety. It disengages positively and is very comfortable.
Great Product.(30.5.2012)
Product is exactly as described, i suggest getting the jig for it as it makes fitting alot quicker. you still need to fit and shape the finger on the saftey to make sure it engages properly. but with the jig you get the bulk of the work out quicker. i like this product and i would recommend to anyone.
Smith & Alexander grip safety(3.3.2017)
I have fitted many safeties on the 1911s. however this seemed to be the hardest one I have had to do. I bought two for two different 1911 I was working on one was a cheap Philipino model the other was a Colt . and I had the same issues with both. I would not recommend this product unless you like to struggle.
Nice Addition(25.10.2010)
Used on a "scratch built" Government Model on an (iffy?) SS Essex frame. Fitted to frame using S&A's installation jig (Brownell's #849-007-000). Took some fitting to "blend" the contours to frame, but I couldn't be happier with the results. Also requires fitting to get correct safety block at end of trigger bow, so be aware of this.
Good-Bye hammer bite.(13.2.2011)
Installed this on a Springfield GI model. Used the S&A jig which worked very well. It was harder to grind the frame than I thought it would be, but I'm not a gunsmith and was using a dremel tool with a carbide bit. It turned out very well though and was well worth the effort; stopping the hamner bite and looking great. Of course you will need to replace the spur hammer too.
beaver tail for my GI(29.5.2011)
By the jig to keep the angles correct, with the jig it took about an hour to reshape the frame, blend it in and reinstall. I am not a gunsmith ,but am a fair hand with tools. The fitting required for this piece was considerably less than expected. This piece is a slightly shortened beavertail which aids in concealed carry.
Nice eddition to my 70 series Gold Cup(23.3.2015)
Nice finish, Left side needed some grinding on safety and frame. Spent several hours getting the sear clearance correct.
Hammer groove was perfect for a commander hammer.
Check out some U-Tube video's if you haven't done this before.
gsg 1911(4.5.2014)
Bought to Install on GSG 1911 .22 to replicate feel of R1 enhanced. Took some blending on grip and channeling for spring but looked and functioned flawlessly.
Nice grip safety(5.12.2015)
This is my 'go to' grip safety for custom work. It allows for a nice high purchase and requires minimal fitting.