Durable stainless steel recoil spring plug replaces a lost or damaged plug. CNC-machined from 316 stainless steel bar stock with an attractive brushed finish and a Flat uncheckered end or a Ringed end. Both styles give a sleek, elegant look and resist marring from either the bushing or bushing wrench during assembly and disassembly.
Odolná zátky vratné pružiny z nerezové oceli nahrazuje ztracenou nebo poškozenou zátku. CNC-obráběna z nerezové oceli 316 s atraktivním kartáčovaným povrchem a plochým nevyrytým koncem nebo koncem s kroužkem. Oba styly poskytují elegantní, sofistikovaný vzhled a odolávají poškrábání od pouzdra nebo klíče na pouzdro při montáži a demontáži.
SPECS: 316 nerezová ocel, saténový povrch. Délka 1½" (3.8cm), průměr ½" (1.3cm).
Další...
Hodnocení zákazníků pro položku WILSON COMBAT RINGED RECOIL SPRING PLUG
Počet hodnocení: 9
Od brownells.com: 9
Průměrné hodnocení: 4,3
Perfect(14.7.2010)
Perfect drop in, Added some BLING to my GI 1911 A must for every stainless freak like me
Ringed cap bullet proof recoil plug(10.1.2011)
Recoil plug was just a touch long, but a couple of passes with a file had it fitting perfectly in no time.
Ok part(23.5.2011)
used on a project 1911, looks nice but had to be cut down to fit a Colt Gold Cup, was too long over all
Like a Pretty Cake but with a Bad Taste(11.8.2011)
I really wanna give this thing a 4 rating. But to do so would deny truth. It's pretty, this is true but if you have a Springfield Armory 1911, I would ask you to check the length of this plug with your slide before you true to actually install it. I had to chop down about 1mm off the back to make it fit mine. That just isn't right in my opinion, I shouldn't have to do that.
Nice lookin' plug.(8.9.2011)
Like the others stated, the plug was too long, but I found that I could cut it down with my 45 Colt case trimmer. I then deburred it and it was good to go.Looks great on my Dan Wesson PM7-45
Dropped in perfectly on my RIA GI(29.5.2012)
I installed this in my RIA 5" GI pistol without any problems. It dropped in without needing shortened so if you plan on using in an RIA, I wouldn't worry about it being to long.
Great Stuff(11.12.2012)
Everyone was very helpful and polite. Really nice people. Best customer service I have experienced in a long time.
Something Different(1.11.2014)
This is a great piece for those of us that try to make our 1911 a little different than the next guy. I have this plug in blue and SS. It's beautiful and looks cool. It's a great alternative to the standard checkered plug. It dropped right in on my Dan Wesson. My gun enthusiast friends have all commented on the looks. This is purely for looks, and it won't disappoint. Like all Wilson parts, the SS is high shine and may not match your finish. The quality is impeccable as expected.
Simple but good looking plug(22.8.2015)
I was looking at custom engraved plugs to set my 1911 build apart a bit. But when I saw these I opted for my build.
These are simple and distinctive looking plugs that will make your 1911 much more interesting to look at.
Produkt č.: 965000106 WILSON COMBAT RINGED RECOIL SPRING PLUG Číslo výrobce: 566874218005948 Odolná zátky vratné pružiny z nerezové oceli nahrazuje ztracenou nebo poškozenou zátku. CNC-obráběna z nerezové oceli 316 s atraktivním kartáčovaným povrchem a plochým nevyrytým koncem nebo koncem s kroužkem. Oba styly poskytují elegantní, sofistikovaný vzhled a odolávají poškrábání od pouzdra nebo klíče na pouzdro při montáži a demontáži.
799CZK0799,00 Kč
*
Předbjednávka, dodací lhůta je přibližně 4-12 týdny ze skladu z USA.
Made in USA
US exportní klasifikace: 0A501.x
Prohlášení o kontrole do destinace: "Tyto položky jsou kontrolovány vládou Spojených států a jsou povoleny na vývoz pouze do země konečného určení k použití konečným příjemcem nebo konečným uživatelem (uživatel,), kteří jsou zde identifikováni. Nesmějí být dále prodány, přepraveny ani jinak zlikvidovány v žádné jiné zemi nebo jiné osobě, než je oprávněn konečný příjemce nebo koncový uživatel, a to buď v jejich původní formě nebo po začlenění do jiných položek, aniž by nejprve získali souhlas od vlády USA nebo byly jinak povoleny."
This item is controlled by the U.S. government and authorized for export only to the country of ultimate destination for use by the ultimate consignee or end-user(s) herein identified. It may not be resold, transferred, or otherwise disposed of, to any other country or to any person other than the authorized ultimate consignee or end-user(s), either in their original form or after being incorporated into other items, without first obtaining approval from the U.S. government or as otherwise authorized by U.S. law and regulations.
Produkt č.: 965000105 WILSON COMBAT FLAT RECOIL SPRING PLUG Číslo výrobce: 565874218005931 Odolná zátky vratné pružiny z nerezové oceli nahrazuje ztracenou nebo poškozenou zátku. CNC-obráběna z nerezové oceli 316 s atraktivním kartáčovaným povrchem a plochým nevyrytým koncem nebo koncem s kroužkem. Oba styly poskytují elegantní, sofistikovaný vzhled a odolávají poškrábání od pouzdra nebo klíče na pouzdro při montáži a demontáži.
799CZK0799,00 Kč
*
Předbjednávka, dodací lhůta je přibližně 4-12 týdny ze skladu z USA.
Durable stainless steel recoil spring plug replaces a lost or damaged plug. CNC-machined from 316 stainless steel bar stock with an attractive brushed finish and a Flat uncheckered end or a Ringed end. Both styles give a sleek, elegant look and resist marring from either the bushing or bushing wrench during assembly and disassembly.
Odolná zátky vratné pružiny z nerezové oceli nahrazuje ztracenou nebo poškozenou zátku. CNC-obráběna z nerezové oceli 316 s atraktivním kartáčovaným povrchem a plochým nevyrytým koncem nebo koncem s kroužkem. Oba styly poskytují elegantní, sofistikovaný vzhled a odolávají poškrábání od pouzdra nebo klíče na pouzdro při montáži a demontáži.
SPECS: 316 nerezová ocel, saténový povrch. Délka 1½" (3.8cm), průměr ½" (1.3cm).
Další...
Hodnocení zákazníků pro položku WILSON COMBAT RINGED RECOIL SPRING PLUG
Počet hodnocení: 9
Od brownells.com: 9
Průměrné hodnocení: 4,3
Perfect(14.7.2010)
Perfect drop in, Added some BLING to my GI 1911 A must for every stainless freak like me
Ringed cap bullet proof recoil plug(10.1.2011)
Recoil plug was just a touch long, but a couple of passes with a file had it fitting perfectly in no time.
Ok part(23.5.2011)
used on a project 1911, looks nice but had to be cut down to fit a Colt Gold Cup, was too long over all
Like a Pretty Cake but with a Bad Taste(11.8.2011)
I really wanna give this thing a 4 rating. But to do so would deny truth. It's pretty, this is true but if you have a Springfield Armory 1911, I would ask you to check the length of this plug with your slide before you true to actually install it. I had to chop down about 1mm off the back to make it fit mine. That just isn't right in my opinion, I shouldn't have to do that.
Nice lookin' plug.(8.9.2011)
Like the others stated, the plug was too long, but I found that I could cut it down with my 45 Colt case trimmer. I then deburred it and it was good to go.Looks great on my Dan Wesson PM7-45
Dropped in perfectly on my RIA GI(29.5.2012)
I installed this in my RIA 5" GI pistol without any problems. It dropped in without needing shortened so if you plan on using in an RIA, I wouldn't worry about it being to long.
Great Stuff(11.12.2012)
Everyone was very helpful and polite. Really nice people. Best customer service I have experienced in a long time.
Something Different(1.11.2014)
This is a great piece for those of us that try to make our 1911 a little different than the next guy. I have this plug in blue and SS. It's beautiful and looks cool. It's a great alternative to the standard checkered plug. It dropped right in on my Dan Wesson. My gun enthusiast friends have all commented on the looks. This is purely for looks, and it won't disappoint. Like all Wilson parts, the SS is high shine and may not match your finish. The quality is impeccable as expected.
Simple but good looking plug(22.8.2015)
I was looking at custom engraved plugs to set my 1911 build apart a bit. But when I saw these I opted for my build.
These are simple and distinctive looking plugs that will make your 1911 much more interesting to look at.