Two Styles, Both With Competition Proven Design That Ends Hammer Bite
Wide grip safety spreads recoil out over a larger area of the hand for increased comfort. Standard Model beavertails feature a flared "tail" that quickly guides hand into position and totally eliminates hammer bite on the web between the thumb and finger. High Grip Model has an upswept "tail" that pushes the wrist into a straight position for faster sight pickup and recovery, and a raised pad for positive palm contact. Requires contouring frame and fitting to the trigger stirrup.
SPECS: Satin finished stainless, blued steel or aluminum alloy. .835" (21.2mm) from rear of hole to tip. Fits Series 70 & 80/90 with firing pin block.
Další...
Dva styly, oba s osvědčeným soutěžním designem, který eliminuje uštipnutí kladívka
Široká pojistka rukojeti rozloží zpětný ráz přes větší plochu ruky pro zvýšený komfort. Standardní modely beavertailů mají rozšířený "ocas", který rychle navede ruku do správné polohy a úplně eliminuje uštipnutí kladívka mezi palec a prst. Model High Grip má zvednutý "ocas", který tlačí zápěstí do přímé polohy pro rychlejší zaměření a návrat zaměření, a zvýšenou podložku pro jistý kontakt dlaně. Vyžaduje konturování rámu a přizpůsobení kohoutkové spojce.
SPECS: Satinově dokončená nerezová ocel, modřená ocel nebo hliníková slitina. .835" (21.2mm) od zadní části otvoru k hrotu. Vhodné pro Series 70 & 80/90 s blokovacím mechanismem úderníku.
Další...
Hodnocení zákazníků pro položku WILSON COMBAT BLUE SAFETY
Počet hodnocení: 13
Od brownells.com: 13
Průměrné hodnocení: 3,8
Perfect fit(23.10.2012)
Dropped in without any alterations on my Colt Delta Elite. Doesnt match the brushed stainless finish exactly but holster wear will take care of that.
A must have addition to any 1911.(23.2.2013)
Just finished installation on my para GI expert and couldnt be more pleased with appearence and feel. A radius jig is a must for installation. Take your time and be patient and you will be very pleased. BTW I polished the beaver tail to a mirror finish but that just my prefference. Now lets go puts some rounds through it.
If you like learning by doing ...(10.4.2010)
I am happy with the finished product, but I had to really work at it. The directions that come with this product are illegible and useless. I gave it only three stars based on that. If you are okay with learning a lot and have the time (took me about 8 hours, next time will be half of that or less) then this is a good weekend project. I put it on my Para G.I., because it was biting my hand. You will need to re-finish the frame afterwards if looks matter. Have a good set of metal files, wear gloves when doing the filing, and you might want to put several layers of tape all around the filing area in the event of the inevitable slips.
Wilson Combat, it doesn't get any better(14.8.2010)
Easy to install. Solid, high quality product.
Fitting required.(21.1.2011)
Ordered for my colt delta elite, installed with the recomended jig. Good idea. Quite a bit of fitting requirered. But once installed functioned flawlesly. Worth the effort.
I would buy again(28.4.2011)
Take your time and it will turn out great. Need to buy the jig.
Perfect fit Springfield Armory Mil Spec(10.2.2012)
This is my first attempt working on 1911s. I own a SA Mil Spec 1911-A1 and it is a sweet gun. I changed the B tail grip, hammer, and sear. It was fairly simple with some help from youtube vidieos. I did not have any problem with the original grip safety on the mil spec just like the looks and feel of the Btail better. I am very happy with Wilson Cambat quality and prices. Also I am very pleased with Brownells service and prices. This is my first but not my last purchase from Brownells.
Casting Issues(12.3.2012)
I bought this grip safety for a new build. I inspected it and found excessive flashing from the injection mould process. It was located along the groove for the hammer strut and on the trigger stop tang. Wanting to move along with my project, I filed the flashing off. I was not completely satisfied that I had to do this much finishing work, I ordered the Bullet Proof Grip safety from Wilson. Much higher quality. I had another issue with a Wilson thumb safety that was cast. The pin was oversize and out of round. Lessons learned. From now on I will be using machined parts rather than cast. I feel Wilson's should be leaning on the company they contract to do their injection moulding about the quality issues.
Excellent Product(20.7.2012)
I bought this to install in a Caspian Frame Build. Buy the fitting jig and the installation/fitting is a snap. Great upgrade from stock.
Major fitting may be needed (13.3.2015)
FFL/SOT at GMF we run a small business so value matters,but not at the cost of quality. Most of the 1911s customized are Colt s70. These beaver tail safety's are Absolutely NOT as good as the bullet proof steel parts,but if your on a budget and need a good cast part these are trustworthy. After modifying frame with fixture some require lots of fit and polish. Others drop right in.
Not exactly drop in, and the finish is far from blue it's closer to cheap parkerizing. It's a dull black finish and I would recommend a gunsmith to install but with patience and some utube vid watching you might get it done without needing to buy another one. Good luck.
wilson problems(23.4.2015)
The 298b grip safety I received was not even close to a
premium product. It had more than one dimensional
problems. Wilson did not offer any help except to contact
where I bought it and how good the more expensive grip
safety was.
When I contacted Brownells, They honored there return
policy just like they advertise.
Brownells still has the service that a lot of companies have
lost.
Thanks, George Butler
Easy Peasy!(2.3.2017)
I purchased this grip safety to replace the original grip safety on my Rock Island Armory 1911 G.I. model 45 ACP. I watched a pro perform this operation on YouTube and followed exactly what he did. This truly is a drop in safety, and was extremely easy to put in with no modifications, other than a commander style drop in hammer, to the pistol what so ever. It was that simple, and now I don't get the old hammer bite, complete with bloody skin, when I shoot the pistol. I am extremely pleased that I found this through Brownell's and I will now buy all my gun parts through this fine company.
Produkt č.: 965298001 WILSON COMBAT BLUE SAFETY Číslo výrobce: 298B874218000660 Široká pojistka rukojeti rozloží zpětný ráz přes větší plochu ruky pro zvýšený komfort. Standardní modely beavertailů mají rozšířený "ocas", který rychle navede ruku do správné polohy a úplně eliminuje uštipnutí kladívka mezi palec a prst. Model High Grip má zvednutý "ocas", který tlačí zápěstí do přímé polohy pro rychlejší zaměření a návrat zaměření, a zvýšenou podložku pro jistý kontakt dlaně. Vyžaduje konturování rámu a přizpůsobení kohoutkové spojce.
1749CZK111 749,00 Kč
*
Dodací lhůta je přibližně 14-21 dní. Více než 10 ks. skladem USA
Made in USA
US exportní klasifikace: 0A501.x
Prohlášení o kontrole do destinace: "Tyto položky jsou kontrolovány vládou Spojených států a jsou povoleny na vývoz pouze do země konečného určení k použití konečným příjemcem nebo konečným uživatelem (uživatel,), kteří jsou zde identifikováni. Nesmějí být dále prodány, přepraveny ani jinak zlikvidovány v žádné jiné zemi nebo jiné osobě, než je oprávněn konečný příjemce nebo koncový uživatel, a to buď v jejich původní formě nebo po začlenění do jiných položek, aniž by nejprve získali souhlas od vlády USA nebo byly jinak povoleny."
This item is controlled by the U.S. government and authorized for export only to the country of ultimate destination for use by the ultimate consignee or end-user(s) herein identified. It may not be resold, transferred, or otherwise disposed of, to any other country or to any person other than the authorized ultimate consignee or end-user(s), either in their original form or after being incorporated into other items, without first obtaining approval from the U.S. government or as otherwise authorized by U.S. law and regulations.
Produkt č.: 965298002 WILSON COMBAT STAINLESS SAFETY Číslo výrobce: 298S874218000677 Široká pojistka rukojeti rozloží zpětný ráz přes větší plochu ruky pro zvýšený komfort. Standardní modely beavertailů mají rozšířený "ocas", který rychle navede ruku do správné polohy a úplně eliminuje uštipnutí kladívka mezi palec a prst. Model High Grip má zvednutý "ocas", který tlačí zápěstí do přímé polohy pro rychlejší zaměření a návrat zaměření, a zvýšenou podložku pro jistý kontakt dlaně. Vyžaduje konturování rámu a přizpůsobení kohoutkové spojce.
1799CZK01 799,00 Kč
*
Předbjednávka, dodací lhůta je přibližně 4-12 týdny ze skladu z USA.
Two Styles, Both With Competition Proven Design That Ends Hammer Bite
Wide grip safety spreads recoil out over a larger area of the hand for increased comfort. Standard Model beavertails feature a flared "tail" that quickly guides hand into position and totally eliminates hammer bite on the web between the thumb and finger. High Grip Model has an upswept "tail" that pushes the wrist into a straight position for faster sight pickup and recovery, and a raised pad for positive palm contact. Requires contouring frame and fitting to the trigger stirrup.
SPECS: Satin finished stainless, blued steel or aluminum alloy. .835" (21.2mm) from rear of hole to tip. Fits Series 70 & 80/90 with firing pin block.
Další...
Dva styly, oba s osvědčeným soutěžním designem, který eliminuje uštipnutí kladívka
Široká pojistka rukojeti rozloží zpětný ráz přes větší plochu ruky pro zvýšený komfort. Standardní modely beavertailů mají rozšířený "ocas", který rychle navede ruku do správné polohy a úplně eliminuje uštipnutí kladívka mezi palec a prst. Model High Grip má zvednutý "ocas", který tlačí zápěstí do přímé polohy pro rychlejší zaměření a návrat zaměření, a zvýšenou podložku pro jistý kontakt dlaně. Vyžaduje konturování rámu a přizpůsobení kohoutkové spojce.
SPECS: Satinově dokončená nerezová ocel, modřená ocel nebo hliníková slitina. .835" (21.2mm) od zadní části otvoru k hrotu. Vhodné pro Series 70 & 80/90 s blokovacím mechanismem úderníku.
Další...
Hodnocení zákazníků pro položku WILSON COMBAT BLUE SAFETY
Počet hodnocení: 13
Od brownells.com: 13
Průměrné hodnocení: 3,8
Perfect fit(23.10.2012)
Dropped in without any alterations on my Colt Delta Elite. Doesnt match the brushed stainless finish exactly but holster wear will take care of that.
A must have addition to any 1911.(23.2.2013)
Just finished installation on my para GI expert and couldnt be more pleased with appearence and feel. A radius jig is a must for installation. Take your time and be patient and you will be very pleased. BTW I polished the beaver tail to a mirror finish but that just my prefference. Now lets go puts some rounds through it.
If you like learning by doing ...(10.4.2010)
I am happy with the finished product, but I had to really work at it. The directions that come with this product are illegible and useless. I gave it only three stars based on that. If you are okay with learning a lot and have the time (took me about 8 hours, next time will be half of that or less) then this is a good weekend project. I put it on my Para G.I., because it was biting my hand. You will need to re-finish the frame afterwards if looks matter. Have a good set of metal files, wear gloves when doing the filing, and you might want to put several layers of tape all around the filing area in the event of the inevitable slips.
Wilson Combat, it doesn't get any better(14.8.2010)
Easy to install. Solid, high quality product.
Fitting required.(21.1.2011)
Ordered for my colt delta elite, installed with the recomended jig. Good idea. Quite a bit of fitting requirered. But once installed functioned flawlesly. Worth the effort.
I would buy again(28.4.2011)
Take your time and it will turn out great. Need to buy the jig.
Perfect fit Springfield Armory Mil Spec(10.2.2012)
This is my first attempt working on 1911s. I own a SA Mil Spec 1911-A1 and it is a sweet gun. I changed the B tail grip, hammer, and sear. It was fairly simple with some help from youtube vidieos. I did not have any problem with the original grip safety on the mil spec just like the looks and feel of the Btail better. I am very happy with Wilson Cambat quality and prices. Also I am very pleased with Brownells service and prices. This is my first but not my last purchase from Brownells.
Casting Issues(12.3.2012)
I bought this grip safety for a new build. I inspected it and found excessive flashing from the injection mould process. It was located along the groove for the hammer strut and on the trigger stop tang. Wanting to move along with my project, I filed the flashing off. I was not completely satisfied that I had to do this much finishing work, I ordered the Bullet Proof Grip safety from Wilson. Much higher quality. I had another issue with a Wilson thumb safety that was cast. The pin was oversize and out of round. Lessons learned. From now on I will be using machined parts rather than cast. I feel Wilson's should be leaning on the company they contract to do their injection moulding about the quality issues.
Excellent Product(20.7.2012)
I bought this to install in a Caspian Frame Build. Buy the fitting jig and the installation/fitting is a snap. Great upgrade from stock.
Major fitting may be needed (13.3.2015)
FFL/SOT at GMF we run a small business so value matters,but not at the cost of quality. Most of the 1911s customized are Colt s70. These beaver tail safety's are Absolutely NOT as good as the bullet proof steel parts,but if your on a budget and need a good cast part these are trustworthy. After modifying frame with fixture some require lots of fit and polish. Others drop right in.
Not exactly drop in, and the finish is far from blue it's closer to cheap parkerizing. It's a dull black finish and I would recommend a gunsmith to install but with patience and some utube vid watching you might get it done without needing to buy another one. Good luck.
wilson problems(23.4.2015)
The 298b grip safety I received was not even close to a
premium product. It had more than one dimensional
problems. Wilson did not offer any help except to contact
where I bought it and how good the more expensive grip
safety was.
When I contacted Brownells, They honored there return
policy just like they advertise.
Brownells still has the service that a lot of companies have
lost.
Thanks, George Butler
Easy Peasy!(2.3.2017)
I purchased this grip safety to replace the original grip safety on my Rock Island Armory 1911 G.I. model 45 ACP. I watched a pro perform this operation on YouTube and followed exactly what he did. This truly is a drop in safety, and was extremely easy to put in with no modifications, other than a commander style drop in hammer, to the pistol what so ever. It was that simple, and now I don't get the old hammer bite, complete with bloody skin, when I shoot the pistol. I am extremely pleased that I found this through Brownell's and I will now buy all my gun parts through this fine company.