Košík je prázdný.

Košík

Help a kontakt

Doprava zdarma při nákupu nad 5 999,00 Kč

100denní politika vrácení

Novinky

Slevy

Přes 300 000 zákazníků - děkujeme vám!

4,93/5 "Velmi dobré" (1400+ hodnocení)

40 000+ produktů pro lov a střelbu

MILLENIUM CUSTOM II
1911 ADVANCED COMPETITION EXTRACTOR

466001009

Dual Coil Springs End Extractor Failure

No-fail extractor operates with long-lasting coil springs for increased service life; provides enhanced, reliable performance for self-defense and competitor shooters. Machined from super strong, alloy steel; specially hardened and heat treated to last indefinitly. Installs easily in Series 70 1911 Autos without slide modifications.

SPECS: Steel, in-the-white, heat treated. Includes two sets of springs, complete instructions. NOTE on 9mm: If your slide has a true, 9mm breech face (like the SVI interchangable, some Caspians and Nowlins, order extractor #466-001-038. If your 9mm is built on a .38 Super Slide (most are) order extractor #466-001-009.

Další...

Dvojité vinuté pružiny eliminují selhání extraktoru

Extraktor bez selhání funguje s dlouhotrvajícími vinutými pružinami pro prodlouženou životnost; poskytuje zvýšený a spolehlivý výkon pro sebeobranu a soutěžní střelce. Vyfrézován z extrémně pevné, slitinové oceli; zvlášť kalený a tepelně upravený pro neomezenou trvanlivost. Snadná instalace do modelů Series 70 1911 Autos bez úprav závěru.

SPECS: Ocel, neopracovaná, tepelně upravená. Obsahuje dvě sady pružin, kompletní návod. POZNÁMKA k 9mm: Pokud má váš závěr pravou, 9mm střenku (jako SVI vyměnitelné, některé Caspians a Nowlins, objednejte extraktor #466-001-038. Pokud je vaše 9mm postavená na .38 Super Slide (většina z nich) objednejte extraktor #466-001-009.

Další...

Hodnocení zákazníků pro položku MILLENIUM CUSTOM II FITS 9X19, 9X21, 9X23X 38 SUPER COMP.

Počet hodnocení: 7
Od brownells.com: 7
Průměrné hodnocení: 4,4

Final Answer in Extractors! (24.8.2009)

This will end your extractor problems in your 1911. I had a Kimber and I could not get the extractor tuned correctly. I spent the extra and got the Millenium over the traditional designs. It installed easily with only minor fitting. Make sure it floats very freely on the firing pin stop. It cured all extractions problems.

Best Extractor Period (15.6.2012)

There isn't a thing to complain about this extractor other than losing the springs when you clean your gun. A little fitting at the firing pin stop and a little shaping (if at all) is all you need to get this extractor running great. The extra cost is actually cheaper in the long run when just having to change the springs and cap compared to changing the entire extractor, fitting, and tuning. I have put well over 5000 rounds on this extractor with no problems at all, and change out the springs and cap just for a yearly tune up. Springs come out still with good spring pressure and the cap isn't beat up at all

Very Disappointed (27.5.2013)

I read good things about this extractor and gave it a try. Unfortunately, I cannot get it to function properly. The instructions talk about fitting a firing pin stop to allow the extractor's slot to pivot around the firing pin stop. After much filing, I've been unable to fit the firing pin stop enough to allow the extractor to exert enough tension on a casing.

Perhaps this company needs to provide its own firing pin stop in the kit.

It'll sit in my spare parts box until I give it away along with a scrapped $20 firing pin stop.

Absolutely the best (14.11.2013)

This is the most reliable extractor that ever was. I wish I had invented it since I am now about to buy my 5th one in about 15 years! No they didn't wear out I'm just putting one on my newest competetion toy. I have NEVER had a failed extraction in 15,000 to 20,000 rounds. I have tried ALL of the others. Watch out for all of the catch phrases like " tough, bullet proof, hard core etc. they talk the talk". Take the time to fit it to the firing pin stop since there are many different sizes. Thickness etc.

Worth Every Penny. (15.3.2014)

My STI Ranger II had failure to extract causing a double feed 5/10 times with reloaded ammunition and about once or twice per mag with factory ammunition. I ordered one of these guys and dropped it in. It fix all of my FTE. I have since ran about 500 rounds through her and i have ZERO issues. For 9mm it's a bit tougher to install an extractor. This product DOES REQUIRE FITTING. you might have to make modifications to your firing pin stop. Mine also sticks out a bit at the back that i will have to file or stone to make it fit flush. I can live with it sticking out a bit so long as my gun guns 100%. This product also requires a breaking in period. It comes with 2 springs and of which i only installed one until the spring softened a little. It is a lot beefier then the stock extractor.

gun fixed (28.6.2015)

Wife favorite gun love to shoot it, 1911 38 super, has has extraction problems right out of the box. Many tunings, no progress Then I bought a high dollar extractor and had the areas "best gunsmith" install and tune it. 70 rounds OK and then problems again with jams and stovepipes again.

Bought one of these extractors installed it myself and she just put "problem free" round number 500 through it today. Problem solved and we are both very pleased with the product.

Worked on a 22 TCM (8.9.2015)

So the Rock Island 22 TCM can be a problematic cartridge. I was starting to have a myriad of FTE's. I read about this and as a last resort thought I'd try it. The 22 TCM is not based on the 9mm but on the 5.56 case head size. So it's a bit smaller. The extractor didn't hold the TCM case as tightly as a 9mm. It didn't matter. It still worked and worked well. For the first time I ran a box of ammo though the pistol with no malfunctions.

It's a bit fiddley to install, more so that a regular extractor but after playing with it a bit I managed to it in...I'm very happy with it. $89.00 is stiff but it does work.

Přečtete si další hodnocení na webu brownells.com

0 0 1 CZK

Produkt č.: 466001009
MILLENIUM CUSTOM II FITS 9X19, 9X21, 9X23X 38 SUPER COMP.
Číslo výrobce: ACE01 Extraktor bez selhání funguje s dlouhotrvajícími vinutými pružinami pro prodlouženou životnost; poskytuje zvýšený a spolehlivý výkon pro sebeobranu a soutěžní střelce. Vyfrézován z extrémně pevné, slitinové oceli; zvlášť kalený a tepelně upravený pro neomezenou trvanlivost. Snadná instalace do modelů Series 70 1911 Autos bez úprav závěru.

Upozornit na dostupnost

Neznáma dostupnost

Vlastnosti: Finish: Black Kalibr: 38 Super (.355-.356) Make: 1911 Model: Government, Commander, Officers

Vložit do nákupního seznamu

Zeptejte se

Podrobnosti

Vložit do nákupního seznamu

Zeptejte se

Top takeaways

Extraktor je vyroben z extrémně pevné, slitinové oceli, kalený a tepelně upravený pro neomezenou trvanlivost.
Snadná instalace do modelů Series 70 1911 Autos bez úprav závěru.
Obsahuje dvě sady pružin a kompletní návod, zajišťuje zvýšený a spolehlivý výkon pro sebeobranu a soutěžní střelce.

Atributy

Caliber: 38 Super (.355-.356) Finish: Black Model: Officers,Commander,Government Udělat: 1911 Dodací hmotnost: 0,018kg Výška přepravy: 8mm Šířka přepravy: 102mm Délka přepravy: 128mm