Collapsible buttstock similar to the current US GI M4 carbine stock provides convenient six-position length-of-pull adjustment to fit different-size shooters, including those wearing body armor. Ready to install on any standard AR-15 rifle or carbine lower receiver; includes buffer tube, receiver lock plate, lock nut, toe-mounted steel sling loop, carbine recoil spring and buffer. Buttstock is made from extremely tough, fiberglass-reinforced, injection-molded nylon to resist impact, heat, moisture, extreme cold, and most cleaning solvents. Steel lock nut has four square notches and pre-cut detents for staking to lock plate. Available with Mil-Spec (nominal 1.14" O.D.) receiver extension tube. Stock interior diameter is matched to buffer tube O.D. for a snug fit that eliminates un wanted play and rattles.
Skládací pažbička podobná současnému vojenskému modelu US GI M4 umožňuje pohodlné nastavení šesti pozic délky pro různě velké střelce, včetně těch, kteří nosí tělesnou zbroj. Připravena k instalaci na jakýkoliv standardní spodní přijímač pušky nebo karabiny AR-15; obsahuje trubku pro tlumič, uzamykací desku přijímače, uzamykací matici, ocelovou smyčku na patě pro uchycení popruhu, pružinu zpětného rázu karabiny a tlumič rázů. Pažbička je vyrobena z extrémně odolného, sklolaminátově posíleného, vstřikovaného nylonu, který odolává nárazům, teplu, vlhkosti, extrémnímu chladu a většině čisticích rozpouštědel. Ocelová uzamykací matice má čtyři čtverečné zářezy a předřezané detenty pro zajištění k uzamykací desce. Dostupná s Mil-Spec (jmenovitý vnější průměr 1.14") trubkou prodloužení přijímače. Vnitřní průměr pažby je přizpůsoben vnějšímu průměru trubky pro tlumič, aby bylo dosaženo pevného spojení, které eliminuje nežádoucí hru a vrzání.
SPECIFIKACE: Hliník a sklolaminátový, vstřikovaný nylon, matně černý. Délka v zasunuté pozici 8¾" (22.2cm); délka v plně vysunuté pozici 11¾" (29.9cm)
Další...
Hodnocení zákazníků pro položku BROWNELLS AR-15 STOCK ASSEMBLY COLLAPSIBLE MIL-SPEC BLACK
Počet hodnocení: 23
Od brownells.com: 23
Průměrné hodnocení: 4,4
Great product for the price.(6.12.2011)
I wanted a quality, basic collapsible stock for my build and got exactly what I wanted. For the price, its a deal for a mil-spec buffer/buttstock. The stock does have some wiggle but the same amount as my friends Magpul stock, nothing excessive. Perfect choice for the normal guy/girl who doesn't need a $2000 buttstock their weapon.
Install on my JD Machine lower was good, no problems.
Best deal in town(9.5.2012)
All very high quality parts. not too much wiggle in the stock and tube. Overall for the price it can't be beat and I'm very satisfied. Highly recommended. I will use this kit for the rest of my builds.
Amazin Stock/Buffer Tube(23.7.2012)
Could not be more pleased with the M4 stock assembly. First time building an AR-15 and the buffer tube and stock fit without any hassle. Truly an absolute deal for the price, you could spend more money on a buffer tube kit without stock but why would you?
Does The Job(20.9.2012)
How you use the product: Using it on a Kel-tec SU16. The rifle is scoped.
Things that are great about it: It very well priced and fits the SU16 well. Everything about it seems solid. Nice to have 6 positions for adjustment.
Things that aren't so great about it: None
MilSpec stock assembly(28.11.2012)
For the price, it is pretty darn good. The buffer tube is Mil Spec for I placed a Vltor adjustable stock on it and it rocks! Nice and tight with no jiggle. The adj stock which comes with it, is prettly good too. Standard issue on most AR products out there including ones from major brands. Keep up the good work Brownells by keeping us happy with good, reliable, and affordable products.
Works great(6.1.2014)
Went on just fine. Deal for the price,
Quality with economy(23.2.2014)
Great quality M4 stock that performs as advertised. Economy of price with a mil-spec tube fits my needs. Couldn't be happier with this piece added to my AR build.
Good practical telescoping stock(17.3.2014)
This stock is well made but rattles because the moving part fits loosely. It is easy to install and the directions are clear. Most other telescoping stock rattle too. For silent carrying buy the fixed stock.
different vendor, poor quality(24.1.2015)
Previous versions of this stock were great, but Brownell's have change their vendor, I've had about 25 of these in the past with no issues, but this last lot of 10 will be returned, not as pictured, weak non-reinforced area around pin boss. Stock fit is loose, Latch is loose and rattles, stock is poorly molded with many sharp edges and thinner webbing, no checkering on latch plate, and buffer tube is drilled clean through on four of the adjustment holes.
didn't rattle(13.3.2015)
standard mil-spec M4 stock, complete kit. mine did not rattle, and is tight in all of the locking positions. stock itself looks like it's made from that standard glass-reinforced nylon composition. the locking collar and end plate have the grayish parkerized finish. i think it's pretty hard to get one of these M4 stocks to not rattle, and this one doesn't, so i'm pleased.
Excellent Ar-15/m4 mil-spec stock.brownells brand is sinonimus of ultra Excellent Quality.highly recommended!!!!
Not exactly what I was hoping for.(16.7.2015)
Looking for the standard stock, got a grade B product. The stock looks off from all the past stocks I've had. Weird look to the plastic, no traction checkering on the adjusting lever. The six holes for adjusting are not right either. 4 holes go all the way through, and 2 holes have smaller holes that go mostly through. I'm sure this is the evolution of a design, but it doesn't suit me. Steve from Florida outlined it very well.
Good Value(6.2.2016)
Bought this when it was on sale. Surprising well constructed for the price. Went together very fast. held up at the range with over 200 rounds. The only down side was the buffer its self. It rattled when shaken but I put it in anyway. I could not hear it when my AR cycled at the range and it did not hurt my accuracy. But I though I would mention it anyway.
not good(5.5.2016)
I just got this stock kit today. I was very disappointed. I have a TAPCO that seems like the same thing but it is not! I like Brownell's a lot, but this stock kit had to be made in China. It is total garbage. It is flimsy and feels very brittle. DO NOT BUY! If you want a decent collapsible stock without spending a lot of money, go with the TAPCO. This thing was not made in America. If it was I will just stick with Magpul.
Great product(22.6.2016)
Works great totally milspec. The buffer tube has a very thick finish and it is all very durable. I have seen some people complain that the hole for the last 4 stock positions have a small hole in the center that goes all they way through but it has no negative effect they simply function as extra drain hole like the one on the back of every carbine buffer tube
Great stock (5.7.2016)
This is a very nice basic stock . Can't beat it for the money. Comes with everything you will need . Yes , it has 4 out of the six holes that go thru , but you can tell its on purpose . I'm assuming it's for water to drain out quicker . I think its a better design than just the hole at the ends. Because the buffer pretty much covers one end , and there is just a small hole on the other end on commercial tubes . No where for the water to go fast .
Perfect(10.7.2016)
Went back and forth on what type of butt stock to go with. Between a Magpul and this standard mil spec one. I feel I made the right choice. Very simple to install. Even better is that it's a tight fit with no rattle or exsessive play. Just what I needed and recommend.
Perfect (31.7.2016)
No holes through as other reviews have stated. Bought it anyway because of the price. Don't forget mil spec doesn't always mean the best. Went for function, and it does. Locks up solid, checkering on adjustment lever. Fit and function are smooth. No complaints.
Very pleased.(16.8.2016)
I apply Cerakote and get the pleasure of blasting the hard coat anodizing off of a lot of different parts from many manufacturers. The anodizing on the buffer tube is good. Should stand up to a lot of wear and tear. The stock is just your basic collapsible carbine stock. Nothing noteworthy about it. At the price it's like you're buying a quality buffer tube and getting the rest of the parts for free.
This is my first foray into the wild wild world of the AR-15 platform modifications. The original stock on my Mossberg MMR Hunter was a bit too long and I decided on this adjustable stock to help me with that problem.
It installed easily, except for the 4 days lost looking for the detent and spring that I let fly (DOH!) and it works perfectly for my purpose. I like it and will recommend it if asked. My friend who was an Armorer in the Corps has already started with the butt jokes. What a kidder.
They work!(1.4.2018)
These are good stock kits. Nothing special, not outstanding quality but good. I had no issues with either kit. Would I buy them again? Yep.. they work.
Really nice for the Money.(4.4.2018)
I am building my on ar15 and this stock was really easy. Nice.
The Best M4 Carbine Stock I Have Found(30.9.2018)
This is one of the best M4 Carbine stocks I have found. Itt is tight and fits perfectly. I highly recommend this stock.
Produkt č.: 080000941 BROWNELLS AR-15 STOCK ASSEMBLY COLLAPSIBLE MIL-SPEC BLACK Číslo výrobce: NONE050806110243 Skládací pažbička podobná současnému vojenskému modelu US GI M4 umožňuje pohodlné nastavení šesti pozic délky pro různě velké střelce, včetně těch, kteří nosí tělesnou zbroj. Připravena k instalaci na jakýkoliv standardní spodní přijímač pušky nebo karabiny AR-15; obsahuje trubku pro tlumič, uzamykací desku přijímače, uzamykací matici, ocelovou smyčku na patě pro uchycení popruhu, pružinu zpětného rázu karabiny a tlumič rázů. Pažbička je vyrobena z extrémně odolného, sklolaminátově posíleného, vstřikovaného nylonu, který odolává nárazům, teplu, vlhkosti, extrémnímu chladu a většině čisticích rozpouštědel. Ocelová uzamykací matice má čtyři čtverečné zářezy a předřezané detenty pro zajištění k uzamykací desce. Dostupná s Mil-Spec (jmenovitý vnější průměr 1.14") trubkou prodloužení přijímače. Vnitřní průměr pažby je přizpůsoben vnějšímu průměru trubky pro tlumič, aby bylo dosaženo pevného spojení, které eliminuje nežádoucí hru a vrzání.
2949CZK2 4302 949,00 Kč
*
Dodací lhůta je přibližně 14-21 dní. Více než 10 ks. skladem USA
Made in USA
US exportní klasifikace: 0A501.x
Prohlášení o kontrole do destinace: "Tyto položky jsou kontrolovány vládou Spojených států a jsou povoleny na vývoz pouze do země konečného určení k použití konečným příjemcem nebo konečným uživatelem (uživatel,), kteří jsou zde identifikováni. Nesmějí být dále prodány, přepraveny ani jinak zlikvidovány v žádné jiné zemi nebo jiné osobě, než je oprávněn konečný příjemce nebo koncový uživatel, a to buď v jejich původní formě nebo po začlenění do jiných položek, aniž by nejprve získali souhlas od vlády USA nebo byly jinak povoleny."
This item is controlled by the U.S. government and authorized for export only to the country of ultimate destination for use by the ultimate consignee or end-user(s) herein identified. It may not be resold, transferred, or otherwise disposed of, to any other country or to any person other than the authorized ultimate consignee or end-user(s), either in their original form or after being incorporated into other items, without first obtaining approval from the U.S. government or as otherwise authorized by U.S. law and regulations.
Objevte skládací pažbičku AR-15 od BROWNELLS. ✨ Nastavitelná, odolná a kompatibilní s Mil-Spec pro maximální pohodlí a výkon.
Collapsible buttstock similar to the current US GI M4 carbine stock provides convenient six-position length-of-pull adjustment to fit different-size shooters, including those wearing body armor. Ready to install on any standard AR-15 rifle or carbine lower receiver; includes buffer tube, receiver lock plate, lock nut, toe-mounted steel sling loop, carbine recoil spring and buffer. Buttstock is made from extremely tough, fiberglass-reinforced, injection-molded nylon to resist impact, heat, moisture, extreme cold, and most cleaning solvents. Steel lock nut has four square notches and pre-cut detents for staking to lock plate. Available with Mil-Spec (nominal 1.14" O.D.) receiver extension tube. Stock interior diameter is matched to buffer tube O.D. for a snug fit that eliminates un wanted play and rattles.
Skládací pažbička podobná současnému vojenskému modelu US GI M4 umožňuje pohodlné nastavení šesti pozic délky pro různě velké střelce, včetně těch, kteří nosí tělesnou zbroj. Připravena k instalaci na jakýkoliv standardní spodní přijímač pušky nebo karabiny AR-15; obsahuje trubku pro tlumič, uzamykací desku přijímače, uzamykací matici, ocelovou smyčku na patě pro uchycení popruhu, pružinu zpětného rázu karabiny a tlumič rázů. Pažbička je vyrobena z extrémně odolného, sklolaminátově posíleného, vstřikovaného nylonu, který odolává nárazům, teplu, vlhkosti, extrémnímu chladu a většině čisticích rozpouštědel. Ocelová uzamykací matice má čtyři čtverečné zářezy a předřezané detenty pro zajištění k uzamykací desce. Dostupná s Mil-Spec (jmenovitý vnější průměr 1.14") trubkou prodloužení přijímače. Vnitřní průměr pažby je přizpůsoben vnějšímu průměru trubky pro tlumič, aby bylo dosaženo pevného spojení, které eliminuje nežádoucí hru a vrzání.
SPECIFIKACE: Hliník a sklolaminátový, vstřikovaný nylon, matně černý. Délka v zasunuté pozici 8¾" (22.2cm); délka v plně vysunuté pozici 11¾" (29.9cm)
Další...
Hodnocení zákazníků pro položku BROWNELLS AR-15 STOCK ASSEMBLY COLLAPSIBLE MIL-SPEC BLACK
Počet hodnocení: 23
Od brownells.com: 23
Průměrné hodnocení: 4,4
Great product for the price.(6.12.2011)
I wanted a quality, basic collapsible stock for my build and got exactly what I wanted. For the price, its a deal for a mil-spec buffer/buttstock. The stock does have some wiggle but the same amount as my friends Magpul stock, nothing excessive. Perfect choice for the normal guy/girl who doesn't need a $2000 buttstock their weapon.
Install on my JD Machine lower was good, no problems.
Best deal in town(9.5.2012)
All very high quality parts. not too much wiggle in the stock and tube. Overall for the price it can't be beat and I'm very satisfied. Highly recommended. I will use this kit for the rest of my builds.
Amazin Stock/Buffer Tube(23.7.2012)
Could not be more pleased with the M4 stock assembly. First time building an AR-15 and the buffer tube and stock fit without any hassle. Truly an absolute deal for the price, you could spend more money on a buffer tube kit without stock but why would you?
Does The Job(20.9.2012)
How you use the product: Using it on a Kel-tec SU16. The rifle is scoped.
Things that are great about it: It very well priced and fits the SU16 well. Everything about it seems solid. Nice to have 6 positions for adjustment.
Things that aren't so great about it: None
MilSpec stock assembly(28.11.2012)
For the price, it is pretty darn good. The buffer tube is Mil Spec for I placed a Vltor adjustable stock on it and it rocks! Nice and tight with no jiggle. The adj stock which comes with it, is prettly good too. Standard issue on most AR products out there including ones from major brands. Keep up the good work Brownells by keeping us happy with good, reliable, and affordable products.
Works great(6.1.2014)
Went on just fine. Deal for the price,
Quality with economy(23.2.2014)
Great quality M4 stock that performs as advertised. Economy of price with a mil-spec tube fits my needs. Couldn't be happier with this piece added to my AR build.
Good practical telescoping stock(17.3.2014)
This stock is well made but rattles because the moving part fits loosely. It is easy to install and the directions are clear. Most other telescoping stock rattle too. For silent carrying buy the fixed stock.
different vendor, poor quality(24.1.2015)
Previous versions of this stock were great, but Brownell's have change their vendor, I've had about 25 of these in the past with no issues, but this last lot of 10 will be returned, not as pictured, weak non-reinforced area around pin boss. Stock fit is loose, Latch is loose and rattles, stock is poorly molded with many sharp edges and thinner webbing, no checkering on latch plate, and buffer tube is drilled clean through on four of the adjustment holes.
didn't rattle(13.3.2015)
standard mil-spec M4 stock, complete kit. mine did not rattle, and is tight in all of the locking positions. stock itself looks like it's made from that standard glass-reinforced nylon composition. the locking collar and end plate have the grayish parkerized finish. i think it's pretty hard to get one of these M4 stocks to not rattle, and this one doesn't, so i'm pleased.
Excellent Ar-15/m4 mil-spec stock.brownells brand is sinonimus of ultra Excellent Quality.highly recommended!!!!
Not exactly what I was hoping for.(16.7.2015)
Looking for the standard stock, got a grade B product. The stock looks off from all the past stocks I've had. Weird look to the plastic, no traction checkering on the adjusting lever. The six holes for adjusting are not right either. 4 holes go all the way through, and 2 holes have smaller holes that go mostly through. I'm sure this is the evolution of a design, but it doesn't suit me. Steve from Florida outlined it very well.
Good Value(6.2.2016)
Bought this when it was on sale. Surprising well constructed for the price. Went together very fast. held up at the range with over 200 rounds. The only down side was the buffer its self. It rattled when shaken but I put it in anyway. I could not hear it when my AR cycled at the range and it did not hurt my accuracy. But I though I would mention it anyway.
not good(5.5.2016)
I just got this stock kit today. I was very disappointed. I have a TAPCO that seems like the same thing but it is not! I like Brownell's a lot, but this stock kit had to be made in China. It is total garbage. It is flimsy and feels very brittle. DO NOT BUY! If you want a decent collapsible stock without spending a lot of money, go with the TAPCO. This thing was not made in America. If it was I will just stick with Magpul.
Great product(22.6.2016)
Works great totally milspec. The buffer tube has a very thick finish and it is all very durable. I have seen some people complain that the hole for the last 4 stock positions have a small hole in the center that goes all they way through but it has no negative effect they simply function as extra drain hole like the one on the back of every carbine buffer tube
Great stock (5.7.2016)
This is a very nice basic stock . Can't beat it for the money. Comes with everything you will need . Yes , it has 4 out of the six holes that go thru , but you can tell its on purpose . I'm assuming it's for water to drain out quicker . I think its a better design than just the hole at the ends. Because the buffer pretty much covers one end , and there is just a small hole on the other end on commercial tubes . No where for the water to go fast .
Perfect(10.7.2016)
Went back and forth on what type of butt stock to go with. Between a Magpul and this standard mil spec one. I feel I made the right choice. Very simple to install. Even better is that it's a tight fit with no rattle or exsessive play. Just what I needed and recommend.
Perfect (31.7.2016)
No holes through as other reviews have stated. Bought it anyway because of the price. Don't forget mil spec doesn't always mean the best. Went for function, and it does. Locks up solid, checkering on adjustment lever. Fit and function are smooth. No complaints.
Very pleased.(16.8.2016)
I apply Cerakote and get the pleasure of blasting the hard coat anodizing off of a lot of different parts from many manufacturers. The anodizing on the buffer tube is good. Should stand up to a lot of wear and tear. The stock is just your basic collapsible carbine stock. Nothing noteworthy about it. At the price it's like you're buying a quality buffer tube and getting the rest of the parts for free.
This is my first foray into the wild wild world of the AR-15 platform modifications. The original stock on my Mossberg MMR Hunter was a bit too long and I decided on this adjustable stock to help me with that problem.
It installed easily, except for the 4 days lost looking for the detent and spring that I let fly (DOH!) and it works perfectly for my purpose. I like it and will recommend it if asked. My friend who was an Armorer in the Corps has already started with the butt jokes. What a kidder.
They work!(1.4.2018)
These are good stock kits. Nothing special, not outstanding quality but good. I had no issues with either kit. Would I buy them again? Yep.. they work.
Really nice for the Money.(4.4.2018)
I am building my on ar15 and this stock was really easy. Nice.
The Best M4 Carbine Stock I Have Found(30.9.2018)
This is one of the best M4 Carbine stocks I have found. Itt is tight and fits perfectly. I highly recommend this stock.
Help a kontakt
(0) 
Novinky
Klasické zobrazení
Mobilní zobrazení