Superb, high-quality hammer reduces felt trigger pull with no gunsmithing required. Geometrically advanced, mirror-polished sear face and precision-ground sear notch lighten and smooth the factory pull by a minimum of 50%. Electro-polishing produces a velvety smooth, low micron overall exterior finish with a higher degree of lubricity for a longer wearing, cleaner breaking, superior feeling trigger without the hard work.
SPECS: Stainless steel. Sapphire honed. Rc 60-61. Includes hammer spring and trigger return spring. 1½" (3.8cm) long, .6 oz. (19g) wt. Fits Ruger 10/22 only.
Další...
Zlepšuje odpor spouště u pušky o 50%
Vynikající, vysoce kvalitní kladivo snižuje vnímaný odpor spouště bez potřeby zásahu zbrojíře. Geometricky pokročilý, zrcadlově leštěný sear a přesně broušený zářez sear snižují a vyhlazují tovární odpor o minimálně 50%. Elektroleštění produkuje sametově hladký, nízký mikronový celkový vnější povrch s vyšší mírou mazivosti pro delší životnost, čistší rozpojení a lepší pocit ze spouště bez tvrdé práce.
SPECIFIKACE: Nerezová ocel. Broušeno safírem. Rc 60-61. Součástí balení je pružina kladiva a pružina pro návrat spouště. Délka 1½" (3.8cm), váha .6 oz. (19g). Vhodné pouze pro Ruger 10/22.
Další...
Hodnocení zákazníků pro položku VOLQUARTSEN 10/22® DROP-IN HAMMER
Počet hodnocení: 21
Od brownells.com: 21
Průměrné hodnocení: 4,8
Fantastic results(21.8.2009)
I have been using these match hammer kits for many years in my trigger jobs. The consistent results that these parts achieve are unequaled in the 10/22 after-market for the price. With over 2,000 trigger jobs performed and having used all kinds of other parts and methods to achieve good results - I can honestly say that these parts are my professional choice.
Easy trigger upgrade(21.10.2009)
I converted a standard 10/22 into a heavy barrelled hunting gun. The target hammer alone gives you a MUCH better trigger than the factory with out being too light for hunting with. It couldn't be much easier to install either, a true drop in part.
Dont Forget the Bushings(22.10.2009)
Great product - reduces the trigger to around 2 lbs. If your rifle was made after 2007, you will need to buy the original factory bushings - SKU# 780-010-029. Ruger changed the hammer later, and the bushings were no longer used. I learned this the hard way. If you hammer does not look like the one in the picture, you will need these.
This is a big bang for the money !!!(3.9.2010)
This is very easy to install. The trigger pull is so nice, just can't put it in to words. Worth every penny. If you only make one change this is it.
Works as advertised(28.10.2010)
I would highly recommend this product. It really lives up the description. Reduced trigger pull, more crisp, etc. I have an older 10/22 and this was just what the doctor ordered.
Was not difficult to install. A little browsing on the interweb produced some photo-instructions that were helpful.
Incredible value!(31.10.2010)
Very straight forward installation, easy to understand directions, and immense improvement on the trigger pull. I would and have recommended this part to friends.
good bang for the buck!(26.2.2011)
easy to install (15 min) very nice trigger pull no creep.
Excellent simple upgrade(19.3.2011)
Install is simple, and this hammer makes a world of difference from the stock 10/22 hammer. Trigger is crisp and much lighter. Can't go wrong for [$]
Great addition(19.9.2011)
Went in very easy. Made the trigger pull nice and smooth. As long as you are familiar with the 10/22 trigger assembly, you should be able to swap this out in no time.
MUST HAVE(27.3.2012)
GET IT. I installed it in 10 min including removing the stock. I did not install the springs, only the hammer and shims. I test my trigger pull with my trigger pull gauge before and had 6 to 6.5 pounds. After installing the volquartsen hammer and shims my trigger is down to 2.25 to 2.5 pounds. Thats huge!!!!!
Excellent!!!(13.6.2012)
Easy to install and reduced my trigger pull from 6.5lbs to 2.25lbs. Took about 10 minutes to get it all in once the rifle was broke down. Parts dropped right in and the instructions were good. If you only do one thing to your 10/22; install this part.
Now Comes with Bushings(8.11.2012)
This is a great improvement over the factory hammer. Not exactly a breaking icicle, but light and fairly crisp. My reason for writing is to point out the bushing set SKU# 780-010-029 mentioned in another post IS NOT NEEDED. The photo on this page is not up to date. All necessary parts are in the package.
Volquartsen Hammer for Ruger 10-22(11.12.2012)
No problems installing. These are great kits.
Volquartsen Drop in Hammer(12.8.2013)
Works as described. I had previously tuned my stock trigger to 5 lbs as measured with my Lyman electronic trigger gauge. Installed the drop in hammer and Volquartsen hammer. Trigger pull is now 2 lb 1 oz. Very smooth, very little creep and very minimal over travel after adjusting the set screw on the trigger.
Drop-in Hammer(7.1.2014)
These are great, probably the single easiest way to improve the trigger on your 10/22. Make sure you clean up the stock disconnector, sear and hammer strut. The hammer strut, being a stamped part, especially needs attention around the rounded pivot end.
This little kit is Fantastic(2.3.2014)
This kit made a huge difference!
Don't get extra bushings! Great Product(19.3.2014)
My 10/22 came with the hammer with integrated bushings and I saw a couple of reviews that said this kit came with extra bushings. I called Brownell's to verify and they said it did not. I ordered an extra set of stainless bushings and when it all arrived I found out that this kit does indeed come with its own set of steel bushings so there was no need for the extra set that I purchase. Overall quality of the kit is great and the trigger pull is reduced quite noticeably as well as smoothed out quite a bit. Great cheap upgrade if you're looking to gain a little accuracy.
Best Upgrade to 10/22(17.12.2014)
This drop in hammer kit is by far the best (and cheapest) upgrade you can do to your 10/22. Install was quick and easy. This kit reduced the trigger pull by at LEAST 50% and removed all trigger creep. My groupings have improved tremendously and my 10/22 is now an absolute tack driver!
Great bang for the buck(13.4.2015)
This is fairly straight forward to install and yields excellent results. There are not many items in the firearms world that yield this much of an improvement for under $50. I have them in all my 10/22 rifles.
Only a small difference(13.7.2015)
This does improve the trigger pull, but only a small amount. I will still purchase the drop in trigger group so I can have the hammer, sear, and trigger together. I would recommend not to get the hammer by itself, and at least pair it with the sear.
Crisp 3#, Great Value(11.6.2017)
We are just plinkers, mainly shooting silhouettes. Per a manual Timney trigger gauge, this kit took my son'Sn factory 10/22 trigger from a creepy 6.25 pounds down to a crisp 3 pounds. I just bought another for my 10/22. I would like an even lighter trigger but it's hard to beat for under $40.
Produkt č.: 930122010 VOLQUARTSEN 10/22® DROP-IN HAMMER Číslo výrobce: VC10TH810162010874 Vynikající, vysoce kvalitní kladivo snižuje vnímaný odpor spouště bez potřeby zásahu zbrojíře. Geometricky pokročilý, zrcadlově leštěný sear a přesně broušený zářez sear snižují a vyhlazují tovární odpor o minimálně 50%. Elektroleštění produkuje sametově hladký, nízký mikronový celkový vnější povrch s vyšší mírou mazivosti pro delší životnost, čistší rozpojení a lepší pocit ze spouště bez tvrdé práce.
1999CZK21 999,00 Kč
*
Dodací lhůta je přibližně 14-21 dní. 2 Počet ks. skladem USA
Made in USA
US exportní klasifikace: 0A501.c
Prohlášení o kontrole do destinace: "Tyto položky jsou kontrolovány vládou Spojených států a jsou povoleny na vývoz pouze do země konečného určení k použití konečným příjemcem nebo konečným uživatelem (uživatel,), kteří jsou zde identifikováni. Nesmějí být dále prodány, přepraveny ani jinak zlikvidovány v žádné jiné zemi nebo jiné osobě, než je oprávněn konečný příjemce nebo koncový uživatel, a to buď v jejich původní formě nebo po začlenění do jiných položek, aniž by nejprve získali souhlas od vlády USA nebo byly jinak povoleny."
This item is controlled by the U.S. government and authorized for export only to the country of ultimate destination for use by the ultimate consignee or end-user(s) herein identified. It may not be resold, transferred, or otherwise disposed of, to any other country or to any person other than the authorized ultimate consignee or end-user(s), either in their original form or after being incorporated into other items, without first obtaining approval from the U.S. government or as otherwise authorized by U.S. law and regulations.
Zvyšte výkon své zbraně s kladivem VOLQUARTSEN 10/22®! 🔥 Snižte odpor spouště o 50% a užijte si hladký chod. Vhodné pro Ruger 10/22.
Superb, high-quality hammer reduces felt trigger pull with no gunsmithing required. Geometrically advanced, mirror-polished sear face and precision-ground sear notch lighten and smooth the factory pull by a minimum of 50%. Electro-polishing produces a velvety smooth, low micron overall exterior finish with a higher degree of lubricity for a longer wearing, cleaner breaking, superior feeling trigger without the hard work.
SPECS: Stainless steel. Sapphire honed. Rc 60-61. Includes hammer spring and trigger return spring. 1½" (3.8cm) long, .6 oz. (19g) wt. Fits Ruger 10/22 only.
Další...
Zlepšuje odpor spouště u pušky o 50%
Vynikající, vysoce kvalitní kladivo snižuje vnímaný odpor spouště bez potřeby zásahu zbrojíře. Geometricky pokročilý, zrcadlově leštěný sear a přesně broušený zářez sear snižují a vyhlazují tovární odpor o minimálně 50%. Elektroleštění produkuje sametově hladký, nízký mikronový celkový vnější povrch s vyšší mírou mazivosti pro delší životnost, čistší rozpojení a lepší pocit ze spouště bez tvrdé práce.
SPECIFIKACE: Nerezová ocel. Broušeno safírem. Rc 60-61. Součástí balení je pružina kladiva a pružina pro návrat spouště. Délka 1½" (3.8cm), váha .6 oz. (19g). Vhodné pouze pro Ruger 10/22.
Další...
Hodnocení zákazníků pro položku VOLQUARTSEN 10/22® DROP-IN HAMMER
Počet hodnocení: 21
Od brownells.com: 21
Průměrné hodnocení: 4,8
Fantastic results(21.8.2009)
I have been using these match hammer kits for many years in my trigger jobs. The consistent results that these parts achieve are unequaled in the 10/22 after-market for the price. With over 2,000 trigger jobs performed and having used all kinds of other parts and methods to achieve good results - I can honestly say that these parts are my professional choice.
Easy trigger upgrade(21.10.2009)
I converted a standard 10/22 into a heavy barrelled hunting gun. The target hammer alone gives you a MUCH better trigger than the factory with out being too light for hunting with. It couldn't be much easier to install either, a true drop in part.
Dont Forget the Bushings(22.10.2009)
Great product - reduces the trigger to around 2 lbs. If your rifle was made after 2007, you will need to buy the original factory bushings - SKU# 780-010-029. Ruger changed the hammer later, and the bushings were no longer used. I learned this the hard way. If you hammer does not look like the one in the picture, you will need these.
This is a big bang for the money !!!(3.9.2010)
This is very easy to install. The trigger pull is so nice, just can't put it in to words. Worth every penny. If you only make one change this is it.
Works as advertised(28.10.2010)
I would highly recommend this product. It really lives up the description. Reduced trigger pull, more crisp, etc. I have an older 10/22 and this was just what the doctor ordered.
Was not difficult to install. A little browsing on the interweb produced some photo-instructions that were helpful.
Incredible value!(31.10.2010)
Very straight forward installation, easy to understand directions, and immense improvement on the trigger pull. I would and have recommended this part to friends.
good bang for the buck!(26.2.2011)
easy to install (15 min) very nice trigger pull no creep.
Excellent simple upgrade(19.3.2011)
Install is simple, and this hammer makes a world of difference from the stock 10/22 hammer. Trigger is crisp and much lighter. Can't go wrong for [$]
Great addition(19.9.2011)
Went in very easy. Made the trigger pull nice and smooth. As long as you are familiar with the 10/22 trigger assembly, you should be able to swap this out in no time.
MUST HAVE(27.3.2012)
GET IT. I installed it in 10 min including removing the stock. I did not install the springs, only the hammer and shims. I test my trigger pull with my trigger pull gauge before and had 6 to 6.5 pounds. After installing the volquartsen hammer and shims my trigger is down to 2.25 to 2.5 pounds. Thats huge!!!!!
Excellent!!!(13.6.2012)
Easy to install and reduced my trigger pull from 6.5lbs to 2.25lbs. Took about 10 minutes to get it all in once the rifle was broke down. Parts dropped right in and the instructions were good. If you only do one thing to your 10/22; install this part.
Now Comes with Bushings(8.11.2012)
This is a great improvement over the factory hammer. Not exactly a breaking icicle, but light and fairly crisp. My reason for writing is to point out the bushing set SKU# 780-010-029 mentioned in another post IS NOT NEEDED. The photo on this page is not up to date. All necessary parts are in the package.
Volquartsen Hammer for Ruger 10-22(11.12.2012)
No problems installing. These are great kits.
Volquartsen Drop in Hammer(12.8.2013)
Works as described. I had previously tuned my stock trigger to 5 lbs as measured with my Lyman electronic trigger gauge. Installed the drop in hammer and Volquartsen hammer. Trigger pull is now 2 lb 1 oz. Very smooth, very little creep and very minimal over travel after adjusting the set screw on the trigger.
Drop-in Hammer(7.1.2014)
These are great, probably the single easiest way to improve the trigger on your 10/22. Make sure you clean up the stock disconnector, sear and hammer strut. The hammer strut, being a stamped part, especially needs attention around the rounded pivot end.
This little kit is Fantastic(2.3.2014)
This kit made a huge difference!
Don't get extra bushings! Great Product(19.3.2014)
My 10/22 came with the hammer with integrated bushings and I saw a couple of reviews that said this kit came with extra bushings. I called Brownell's to verify and they said it did not. I ordered an extra set of stainless bushings and when it all arrived I found out that this kit does indeed come with its own set of steel bushings so there was no need for the extra set that I purchase. Overall quality of the kit is great and the trigger pull is reduced quite noticeably as well as smoothed out quite a bit. Great cheap upgrade if you're looking to gain a little accuracy.
Best Upgrade to 10/22(17.12.2014)
This drop in hammer kit is by far the best (and cheapest) upgrade you can do to your 10/22. Install was quick and easy. This kit reduced the trigger pull by at LEAST 50% and removed all trigger creep. My groupings have improved tremendously and my 10/22 is now an absolute tack driver!
Great bang for the buck(13.4.2015)
This is fairly straight forward to install and yields excellent results. There are not many items in the firearms world that yield this much of an improvement for under $50. I have them in all my 10/22 rifles.
Only a small difference(13.7.2015)
This does improve the trigger pull, but only a small amount. I will still purchase the drop in trigger group so I can have the hammer, sear, and trigger together. I would recommend not to get the hammer by itself, and at least pair it with the sear.
Crisp 3#, Great Value(11.6.2017)
We are just plinkers, mainly shooting silhouettes. Per a manual Timney trigger gauge, this kit took my son'Sn factory 10/22 trigger from a creepy 6.25 pounds down to a crisp 3 pounds. I just bought another for my 10/22. I would like an even lighter trigger but it's hard to beat for under $40.
Help a kontakt
(0) 
Novinky
Klasické zobrazení
Mobilní zobrazení